References
- Bolton, M. D., and C. K. Lau. 1993. “Vertical Bearing Capacity Factors for Circular and Strip Footings on Mohr–Coulomb Soil.” Canadian Geotechnical Journal 30 (6): 1024–1033. doi:10.1139/t93-099.
- Chen, W. F. 1975. Limit Analysis and Soil Plasticity. Amsterdam: Holland.
- Cheng, Y. M., L. Li, Y. J. Sun, and S. K. Au. 2012. “A Coupled Particle Swarm and Harmony Search Optimization Algorithm for Difficult Geotechnical Problems.” Structural and Multidisciplinary Optimization 45 (4): 489–501. doi:10.1007/s00158-011-0694-z.
- Cui, L. J., and D. C. Sheng. 2005. “Genetic Algorithms in Probabilistic Finite Element Analysis of Geotechnical Problems.” Computers and Geotechnics 32 (8): 555–563. doi:10.1016/j.compgeo.2005.11.005.
- Drescher, A., and E. Detournay. 1993. “Limit Load in Translational Failure Mechanisms for Associative and Non-associative Materials.” Géotechnique 43 (3): 443–456. doi: 10.1680/geot.1993.43.3.443
- Gao, W. 2015. “Stability Analysis of Rock Slope Based on an Abstraction Ant Colony Clustering Algorithm.” Environmental Earth Sciences 73 (12): 7969–7982. doi:10.1007/s12665-014-3956-4.
- Gottardi, G., G. T. Houlsby, and R. Butterfield. 1999. “Plastic Response of Circular Footing on Sand Under General Planar Loading.” Géotechnique 49 (4): 453–469. doi: 10.1680/geot.1999.49.4.453
- Hansen, J. B. 1970. “A Revised and Extended Formula for Bearing Capacity.” Bulletin of the Danish Geotechnical Institute 28: 5–11.
- Hjiaj, M., A. V. Lyamin, and S. W. Sloan. 2004. “Bearing Capacity of a Cohesive-Frictional Soil Under Non-eccentric Inclined Loading.” Computers and Geotechnics 31 (6): 491–516. doi:10.1016/j.compgeo.2004.06.001.
- Jin, L. X., and Q. X. Feng. 2018. “Improved Radial Movement Optimization to Determine the Critical Failure Surface for Slope Stability Analysis.” Environmental Earth Sciences 77: 564. doi:10.1007/s12665-018-7742-6.
- Jin, L. X., H. C. Zhang, and Q. X. Feng. 2019. “Application of Improved Radial Movement Optimization for Calculating the Upper Bound of Ultimate Bearing Capacity of Shallow Foundation on Unsaturated Soil.” Computers and Geotechnics 109: 82–88. doi:10.1016/j.compgeo.2019.01.016.
- Kalinli, A., M. C. Acar, and Z. Gündüz. 2011. “New Approaches to Determine the Ultimate Bearing Capacity of Shallow Foundations Based on Artificial Neural Networks and Ant Colony Optimization.” Engineering Geology 117: 29–38. doi:10.1016/j.enggeo.2010.10.002.
- Krabbenhoft, S., L. Damkilde, and K. Krabbenhoft. 2014. “Bearing Capacity of Strip Footings in Cohesionless Soil Subject to Eccentric and Inclined Loads.” International Journal of Geomechanics 14 (3): 1–18. doi:10.1061/(ASCE)GM.1943-5622.0000332.
- Loukidis, D., T. Chakraborty, and R. Salgado. 2008. “Bearing Capacity of Strip Footings on Purely Frictional Soil Under Eccentric and Inclined Loads.” Canadian Geotechnical Journal 45 (6): 768–787. doi:10.1139/T08-015.
- Lyamin, A., R. Salgado, S. W. Sloan, and M. Prezzi. 2007. “Two and Three-Dimensional Bearing Capacity of Footings in Sand.” Géotechnique 57 (8): 647–662. doi:10.1680/geot.2007.57.8.647.
- Mahrami, M., R. Rahmani, M. Seyedmahmoudian, R. Mashayekhi, H. Karimi, and E. Hosseini. 2016. “A Hybrid Metaheuristic Technique Developed for Hourly Load Forecasting.” Complexity 21 (S1): 521–532. doi:10.1002/cplx.21766.
- Meyerhof, G. G. 1951. “The Ultimate Bearing Capacity of Foundations.” Géotechnique 2 (4): 301–332. doi:10.1680/geot.1951.2.4.301.
- Meyerhof, G. G. 1963. “Some Recent Research on the Bearing Capacity of Foundations.” Canadian Geotechnical Journal 1 (1): 16–26. doi:10.1139/t63-003.
- Michalowski, R. 1997. “An Estimate of the Influence of Soil Weight on Bearing Capacity Using Limit Analysis.” Soils and Foundations 37 (4): 57–64. doi:10.3208/sandf.37.4_57.
- Patra, C. R., R. N. Behera, N. Sivakugan, and B. M. Das. 2012. “Ultimate Bearing Capacity of Shallow Strip Foundation Under Eccentrically Inclined Load, Part I.” International Journal of Geotechnical Engineering 6 (3): 343–352. doi:10.3328/IJGE.2012.06.03.343-352.
- Rahmani, R., and R. Yusof. 2014. “A New Simple, Fast and Efficient Algorithm for Global Optimization Over Continuous Search-Space Problems: Radial Movement Optimization.” Applied Mathematics and Computation 248 (1): 287–300. doi:10.1016/j.amc.2014.09.102.
- Rao, P. P., Y. Liu, and J. F. Cui. 2015. “Bearing Capacity of Strip Footings on Two-Layered Clay Under Combined Loading.” Computers and Geotechnics 69: 210–218. doi:10.1016/j.compgeo.2015.05.018.
- Saran, S., and R. K. Agarwal. 1991. “Bearing Capacity of Eccentrically Obliquely Loaded Footing.” Journal of Geotechnical Engineering 117 (11): 1669–1690. doi:10.1061/(ASCE)0733-9410(1991)117:11(1669).
- Seyedmahmoudian, M., B. Horan, R. Rahmani, A. M. T. Oo, and A. Stojcevski. 2016. “Efficient Photovoltaic System Maximum Power Point Tracking Using a new Technique.” Energies 9 (3): 147. doi:10.3390/en9030147.
- Soubra, A. H. 1999. “Upper-Bound Solutions for Bearing Capacity of Foundations.” Journal of Geotechnical and Geoenvironmental Engineering 125 (1): 59–68. doi:10.1061/(ASCE)1090-0241(1999)125:1(59).
- Terzaghi, K. 1943. Theoretical Soil Mechanics. New York: Wiley.
- Vanithasri, M., R. Balamurugan, and L. Lakshminarasimman. 2018. “Radial Movement Optimization (RMO) Technique for Solving Unit Commitment Problem in Power Systems.” Journal of Electrical Systems and Information Technology 5: 697–707. doi:10.1016/j.jesit.2017.05.003.
- Van Baars, S. 2014. “The Inclination and Shape Factors for the Bearing Capacity of Footings.” Soils and Foundations 54 (5): 985–992. doi:10.1016/j.sandf.2014.09.004.
- Veiskarami, M., J. Kumar, and F. Valikhah. 2014. “Effect of the Flow Rule on the Bearing Capacity of Strip Foundations on Sand by the Upper-Bound Limit Analysis and Slip Lines.” International Journal of Geomechanics 14 (3): 1–11. doi:10.1061/(ASCE)GM.1943-5622.0000324.
- Vesic, A. S. 1975. “Bearing Capacity of Shallow Foundations.” In Foundation Engineering Handbook, edited by H. F. Winterkorn and H. Y. Fang, 121–147. New York: Van Nostrand Reinhold.
- Wang, Y. J., J. H. Yin, and Z. Y. Chen. 2001. “Calculation of Bearing Capacity of a Strip Footing Using an Upper Bound Method.” International Journal for Numerical and Analytical Methods in Geomechanics 25 (8): 841–851. doi:10.1002/nag.151.
- Yahia-Cherif, H. A., A. Mabrouki, D. Benmeddour and M. Mellas . 2017. “Bearing Capacity of Embedded Strip Footings on Cohesionless Soil Under Vertical and Horizontal Loads.” Geotechnical and Geological Engineering 35 (2): 547–558. doi:10.1007/s10706-016-0124-5.
- Yun, G. J., and M. F. Bransby. 2003. “Centrifuge Modeling of the Horizontal Capacity of Skirted Foundations on Drained Loose Sand.” In BGA International Conference on Foundations, Innovations, Observations, Design and Practice, edited by T. A. Newson, 975–984. London: Thomas Telford Publishing.
- Zhao, H. B., and S. Yin. 2010. “A CPSO-SVM Model for Ultimate Bearing Capacity Determination.” Marine Georesources and Geotechnology 28: 64–75. doi:10.1080/10641190903359076.
- Zheng, G., J. P. Zhao, H. Z. Zhou, and T. Q. Zhang. 2019. “Ultimate Bearing Capacity of Strip Footings on Sand Overlying Clay Under Inclined Loading.” Computers and Geotechnics 106: 266–273. doi:10.1016/j.compgeo.2018.11.003.
- Zhu, D. Y. 2000. “The Least Upper-Bound Solutions for Bearing Capacity Factor Nγ.” Soils and Foundations 40 (1): 123–129. doi: 10.3208/sandf.40.123