References
- Akgün, M. A. 1993. “A New Family of Mode-Superposition Methods for Response Calculations.” Journal of Sound and Vibration 167 (2): 289–302. doi: 10.1006/jsvi.1993.1336.
- Araujo, A. L., P. Martins, C. M. M. Soares, C. A. M. Soares, and J. Herskovits. 2009. “Damping Optimization of Viscoelastic Laminated Sandwich Composite Structures.” Structural and Multidisciplinary Optimization 39 (6): 569–579. doi: 10.1007/s00158-009-0390-4.
- Baz, A., and J. Ro. 1995. “Optimum Design and Control of Active Constrained Layer Damping.” Journal of Mechanical Design 117: 135–144. doi: 10.1115/1.2836447.
- Bondaryk, J. E. 1997. “Vibration of Truss Structures.” The Journal of the Acoustical Society of America 102 (4): 2167–2175. doi: 10.1121/1.419632.
- Braconnier, T., M. Ferrier, J. C. Jouhaud, M. Montagnac, and P. Sagaut. 2011. “Towards an Adaptive POD/SVD Surrogate Model for Aeronautic Design.” Computers & Fluids 40 (1): 195–209. doi: 10.1016/j.compfluid.2010.09.002.
- Ceccato, C., X. W. Zhou, D. Pelessone, and G. Cusatis. 2018. “Proper Orthogonal Decomposition Framework for the Explicit Solution of Discrete Systems with Softening Response.” Journal of Applied Mechanics 85 (5): 051004. doi: 10.1115/1.4038967.
- Dickens, J. M., J. M. Nakagawa, and M. J. Wittbrodt. 1997. “A Critique of Mode Acceleration and Modal Truncation Augmentation Methods for Modal Response Analysis.” Computers & Structures 62 (6): 985–998. doi: 10.1016/S0045-7949(96)00315-X.
- Fan, R. P., G. Meng, J. Yang, and C. C. He. 2009. “Experimental Study of the Effect of Viscoelastic Damping Materials on Noise and Vibration Reduction within Railway Vehicles.” Journal of Sound and Vibration 319 (1–2): 58–76. doi: 10.1016/j.jsv.2008.03.071.
- Feeny, B. 1998. “On the Physical Interpretation of Proper Orthogonal Modes in Vibrations.” Journal of Sound and Vibration 211 (4): 607–616. doi: 10.1006/jsvi.1997.1386.
- Fossati, M., and W. G. Habashi. 2013. “Multiparameter Analysis of Aero-icing Problems Using Proper Orthogonal Decomposition and Multidimensional Interpolation.” AIAA Journal 51 (4): 946–960. doi: 10.2514/1.J051877.
- Han, J. S. 2012. “Efficient Frequency Response and Its Direct Sensitivity Analyses for Large-Size Finite Element Models Using Krylov Subspace-Based Model Order Reduction.” Journal of Mechanical Science and Technology 26 (4): 1115–1126. doi: 10.1007/s12206-012-0227-8.
- Kassem, M., Z. C. Yang, Y. S. Gu, W. Wang, and E. Safwat. 2020. “Active Dynamic Vibration Absorber for Flutter Suppression.” Journal of Sound and Vibration 469: 115110. doi: 10.1016/j.jsv.2019.115110.
- Kerschen, G., F. Poncelet, and J. C. Golinval. 2007. “Physical Interpretation of Independent Component Analysis in Structural Dynamics.” Mechanical Systems and Signal Processing 21 (4): 1561–1575. doi: 10.1016/j.ymssp.2006.07.009.
- Keshtegar, B., P. Hao, Y. T. Wang, and Y. F. Li. 2017. “Optimum Design of Aircraft Panels Based on Adaptive Dynamic Harmony Search.” Thin-Walled Structures 118: 37–45. doi: 10.1016/j.tws.2017.05.004.
- Kitis, L., B. P. Wang, and W. D. Pilkey. 1983. “Vibration Reduction Over a Frequency Range.” Journal of Sound and Vibration 89 (4): 559–569. doi: 10.1016/0022-460X(83)90357-7.
- Li, Z. Y., T. X. Ma, Y. Z. Wang, F. M. Li, and C. Z. Zhang. 2020. “Vibration Isolation by Novel Meta-design of Pyramid-Core Lattice Sandwich Structures.” Journal of Sound and Vibration 480: 115377. doi: 10.1016/j.jsv.2020.115377.
- Li, Y. W., K. Tian, P. Hao, B. Wang, H. Wu, and B. Wang. 2020. “Finite Element Model Updating for Repeated Eigenvalue Structures via the Reduced-Order Model Using Incomplete Measured Modes.” Mechanical Systems and Signal Processing 142: 106748. doi: 10.1016/j.ymssp.2020.106748.
- Li, S., J. S. Yang, L. Z. Wu, G. C. Yu, and L. J. Feng. 2019. “Vibration Behavior of Metallic Sandwich Panels with Hourglass Truss Cores.” Marine Structures 63: 84–98. doi: 10.1016/j.marstruc.2018.09.004.
- Liu, Y., X. Wang, and Y. Li. 2020. “Distributed Piezoelectric Actuator Layout-Design for Active Vibration Control of Thin-Walled Smart Structures.” Thin-Walled Structures 147: 106530. doi: 10.1016/j.tws.2019.106530.
- Liu, H. T., S. L. Xu, Y. Ma, X. D. Chen, and X. F. Wang. 2016. “An Adaptive Bayesian Sequential Sampling Approach for Global Metamodeling.” Journal of Mechanical Design 138 (1): 011404. doi: 10.1115/1.4031905.
- Liu, H. T., S. L. Xu, and X. F. Wang. 2015. “Sequential Sampling Designs Based on Space Reduction.” Engineering Optimization 47 (7): 867–884. doi: 10.1080/0305215x.2014.928816.
- Lu, J., P. Wang, and Z. Zhan. 2017. “Active Vibration Control of Thin-Plate Structures with Partial SCLD Treatment.” Mechanical Systems and Signal Processing 84: 531–550. doi: 10.1016/j.ymssp.2016.06.013.
- Luo, H. T., J. Fu, P. Wang, and H. N. Wang. 2018. “Design Analysis and Experimental Verification of Vibration Reduction of Spatial Composite Damping Truss Structure.” Advances in Mechanical Engineering 10 (12): 168781401881934. doi: 10.1177/1687814018819346.
- Luo, Y. J., Y. H. Zhang, M. L. Xu, K. K. Fu, L. Ye, S. L. Xie, and X. N. Zhang. 2019. “Improved Vibration Attenuation Performance of Large Hoop Truss Structures via a Hybrid Control Algorithm.” Smart Materials and Structures 28 (6): 065007. doi: 10.1088/1361-665X/ab1448.
- Marcelin, J. L., S. Shakhesi, and F. Pourroy. 1995. “Optimal Constrained Layer Damping of Beams: Experimental and Numerical Studies.” Shock and Vibration 2 (6): 445–450. doi: 10.1155/1995/395216.
- Mckay, M. D., R. J. Beckman, and W. J. Conover. 2000. “A Comparison of Three Methods for Selecting Values of Input Variables in the Analysis of Output from a Computer Code.” Technometrics 42 (1): 55–61. doi: 10.2307/1271432.
- Meerbergen, K. 2008. “Fast Frequency Response Computation for Rayleigh Damping.” International Journal for Numerical Methods in Engineering 73 (1): 96–106. doi: 10.1002/nme.2058.
- Meftah, S. A., E. Daya, and A. Tounsi. 2012. “Finite Element Modelling of Sandwich Box Column with Viscoelastic Layer for Passive Vibrations Control Under Seismic Loading.” Thin-Walled Structures 51: 174–185. doi: 10.1016/j.tws.2011.10.015.
- Megahed, S. M., and A. K. A. El-Razik. 2010. “Vibration Control of Two Degrees of Freedom System Using Variable Inertia Vibration Absorbers: Modeling and Simulation.” Journal of Sound and Vibration 329 (23): 4841–4865. doi: 10.1016/j.jsv.2010.05.017.
- Ormondroyd, J., and J. P. Den Hartog. 1928. “The Theory of Dynamic Vibration Absorber.” Journal of Applied Mechanics 49: 9–22.
- Paul, D. T. A., and D. Amsallem. 2015. “An Adaptive and Efficient Greedy Procedure for the Optimal Training of Parametric Reduced-Order Models.” International Journal for Numerical Methods in Engineering 102 (5): 1262–1292. doi: 10.1002/nme.4759.
- Qu, Z. Q. 2007. “Adaptive Mode Superposition and Acceleration Technique with Application to Frequency Response Function and Its Sensitivity.” Mechanical Systems and Signal Processing 21 (1): 40–57. doi: 10.1016/j.ymssp.2006.02.002.
- Ross, D., E. Ungar, and E. Kerwin. 1959. “Damping of Plate Flexural Vibrations by Means of Viscoelastic Laminae.” A Colloquium on Structural Damping Held at the ASME Annual Meeting 3: 49–88.
- Shen, Y. J., L. Chen, X. F. Yang, D. H. Shi, and J. Yang. 2016. “Improved Design of Dynamic Vibration Absorber by Using the Inerter and Its Application in Vehicle Suspension.” Journal of Sound and Vibration 361: 148–158. doi: 10.1016/j.jsv.2015.06.045.
- Shen, Y. J., Z. Y. Xing, S. P. Yang, and J. Q. Sun. 2019. “Parameters Optimization for a Novel Dynamic Vibration Absorber.” Mechanical Systems and Signal Processing 133: 106282. doi: 10.1016/j.ymssp.2019.106282.
- Sun, H. T., and S. Michael. 2011. “Reduced Order Model Assisted Evolutionary Algorithms for Multi-objective Flow Design Optimization.” Engineering Optimization 43 (1): 97–114. doi: 10.1080/03052151003789841.
- Tian, K., B. Wang, Y. Zhou, and M. W. Anthony. 2018. “Proper-Orthogonal-Decomposition-Based Buckling Analysis and Optimization of Hybrid Fiber Composite Shells.” AIAA Journal 56 (5): 1723–1730. doi: 10.2514/1.J056920.
- Wang, B., X. T. Ma, K. Tian, P. Hao, Y. Zhou, and D. L. Quan. 2019. “Concurrent Patch Optimization of Hybrid Composite Plates Based on Proper Orthogonal Decomposition.” AIAA Journal 57 (11): 4915–4926. doi: 10.2514/1.J058064.
- Wu, B. S., S. T. Yang, Z. G. Li, and S. P. Zheng. 2015. “A Combined Method for Computing Frequency Responses of Proportionally Damped Systems.” Mechanical Systems and Signal Processing 60-61: 535–546. doi:10.1016/j.ymssp.2015.01.018.
- Wu, B. S., S. T. Yang, Z. G. Li, H. X. Zhong, and X. Chen. 2019. “Computation of Frequency Responses and Their Sensitivities for Undamped Systems.” Engineering Structures 182: 416–426. doi: 10.1016/j.engstruct.2018.12.094.
- Xi, Z. M., B. D. Youn, and C. Hu. 2010. “Random Field Characterization Considering Statistical Dependence for Probability Analysis and Design.” Journal of Mechanical Design 132 (10): 101008. doi:10.1115/1.4002293.
- Xie, Z. C., W. S. Shepard, and K. A. Woodbury. 2009. “Design Optimization for Vibration Reduction of Viscoelastic Damped Structures Using Genetic Algorithms.” Shock and Vibration 16 (5): 455–466. doi: 10.3233/Sav-2009-0480.
- Xu, S. L., H. T. Liu, X. F. Wang, and X. M. Jiang. 2014. “A Robust Error-Pursuing Sequential Sampling Approach for Global Metamodeling Based on Voronoi Diagram and Cross Validation.” Journal of Mechanical Design 136 (7): 071009. doi:10.1115/1.4027161.
- Yu, G. L., and H. W. Miao. 2019. “On Vibration Isolation of Sandwich Plate with Periodic Hollow Tube Core.” Journal of Sandwich Structures and Materials 21 (3): 1119–1132. doi: 10.1177/1099636217707933.
- Zhang, Y. M., N. H. Kim, and R. T. Haftka. 2019. “General Surrogate Adaptive Sampling Using Interquartile Range for Design Space Exploration.” Journal of Mechanical Design 142 (5): 1. doi: 10.1115/1.4044432.