References
- Andreasen, C. S., E. Andreassen, J. S. Jense, and O. Sigmund. 2014. “On the Realization of the Bulk Modulus Bounds for Two-Phase Structural Composites.” Journal of the Mechanics and Physics of Solids 63: 228–241. doi:https://doi.org/10.1016/j.jmps.2013.09.007.
- Andreassen, E., and J. S. Jensen. 2014. “Topology Optimization of Periodic Microstructures for Enhanced Dynamic Properties of Structural Composite Materials.” Structural and Multidisciplinary Optimization 49: 695–705. doi:https://doi.org/10.1007/s00158-013-1018-2.
- Andreassen, E., and J. S. Jensen. 2016. “A Practical Multiscale Approach for Optimization of Structural Damping.” Structural and Multidisciplinary Optimization 53: 215–224. doi:https://doi.org/10.1007/s00158-015-1326-9.
- Bendsøe, M. P., and O. Sigmund. 2003. Topology Optimization: Theory, Methods and Applications. Berlin: Springer.
- Delissen, A., F. V. Keulen, and M. Langelaar. 2020. “Efficient Limitation of Resonant Peaks by Topology Optimization Including Modal Truncation Augmentation.” Structural and Multidisciplinary Optimization 61: 2557–2575. doi:https://doi.org/10.1007/s00158-019-02471-9.
- El-Sabbagh, A., and A. Baz. 2014. “Topology Optimization of Unconstrained Damping Treatments for Plates.” Engineering Optimization 46: 1153–1168. doi:https://doi.org/10.1080/0305215X.2013.832235.
- Giraldo–Londoño, O., and G. H. Paulino. 2020. “Fractional Topology Optimization of Periodic Multi-material Viscoelastic Microstructures With Tailored Energy Dissipation.” Computer Methods in Applied Mechanics and Engineering 372: 113307. doi:https://doi.org/10.1016/j.cma.2020.113307.
- Huang, X., S. Zhou, G. Sun, G. Li, and Y. M. Xie. 2015. “Topology Optimization for Microstructures of Viscoelastic Composite Materials.” Computer Methods in Applied Mechanics and Engineering 283: 503–516. doi:https://doi.org/10.1016/j.cma.2014.10.007.
- Kang, Z., X. Zhang, S. Jiang, and G. Cheng. 2012. “On Topology Optimization of Damping Layer in Shell Structures Under Harmonic Excitations.” Structural and Multidisciplinary Optimization 46 (1): 51–67. doi:https://doi.org/10.1007/s00158-011-0746-4.
- Kung, S. W., and R. Singh. 1999. “Development of Approximate Methods for the Analysis of Patch Damping Design Concepts.” Journal of Sound and Vibration 219: 785–812. doi:https://doi.org/10.1006/jsvi.1998.1876.
- Lall, A. K., N. T. Asnani, and B. C. Nakra. 1987. “Vibration and Damping Analysis of Rectangular Plate With Partially Covered Constrained Viscoelastic Layer.” Journal of Vibration and Acoustics 109 (3): 241–247. doi:https://doi.org/10.1115/1.3269427.
- Lall, A. K., N. T. Asnani, and B. C. Nakra. 1988. “Damping Analysis of Partially Covered Sandwich Beams.” Journal of Sound and Vibration 123: 247–259. doi:https://doi.org/10.1016/S0022-460X(88)80109-3.
- Ling, Z., R. Xie, W. Yi, and A. El-Sabbagh. 2011. “Topology Optimization of Constrained Layer Damping on Plates Using Method of Moving Asymptote (MMA) Approach.” Shock and Vibration 18: 221–244. doi:https://doi.org/10.1155/2011/830793.
- Liu, H., W. Zhang, and T. Gao. 2015. “A Comparative Study of Dynamic Analysis Methods for Structural Topology Optimization Under Harmonic Force Excitations.” Structural and Multidisciplinary Optimization 51 (6): 1321–1333. doi:https://doi.org/10.1007/s00158-014-1218-4.
- Plunkett, R., and C. T. Lee. 1970. “Length Optimization for Constrained Viscoelastic Layer Damping.” The Journal of the Acoustical Society of America 48 (1): 150–161. doi:https://doi.org/10.1121/1.1912112.
- Rao, M. D. 2003. “Recent Applications of Viscoelastic Damping for Noise Control in Automobiles and Commercial Airplanes.” Journal of Sound and Vibration 262 (3): 457–474. doi:https://doi.org/10.1016/S0022-460X(03)00106-8.
- Shen, I. Y. 1994. “Hybrid Damping Through Intelligent Constrained Layer Treatments.” Journal of Vibration and Acoustics 116 (3): 341–349. doi:https://doi.org/10.1115/1.2930434.
- Svanberg, K. 2002. “A Class of Globally Convergent Optimization Methods Based on Conservative Convex Separable Approximations.” SIAM Journal on Optimization 12: 555–573. doi:https://doi.org/10.1137/S1052623499362822.
- Takezawa, A., M. Daifuku, Y. Nakano, K. Nakagawa, T. Yamamoto, and M. Kitamura. 2016. “Topology Optimization of Damping Material for Reducing Resonance Response Based on Complex Dynamic Compliance.” Journal of Sound and Vibration 365: 230–243. doi:https://doi.org/10.1016/j.jsv.2015.11.045.
- Xu, B., H. Ding, and Y. M. Xie. 2017. “Optimal Design of Material Microstructure for Maximizing Damping Dissipation Velocity of Piezoelectric Composite Beam.” International Journal of Mechanical Sciences 128-129: 527–540. doi:https://doi.org/10.1016/j.ijmecsci.2017.05.02.
- Xu, B., J. P. Ou, and J. S. Jiang. 2013. “Integrated Optimization of Structural Topology and Control for Piezoelectric Smart Plate Based on Genetic Algorithm.” Finite Elements in Analysis and Design 64: 1–12. doi:https://doi.org/10.1016/j.finel.2012.09.004.
- Yamamoto, T., T. Yamada, K. Izui, and S. Nishiwaki. 2015. “Topology Optimization of Free-Layer Damping Material on a Thin Panel for Maximizing Modal Loss Factors Expressed by Only Real Eigenvalues.” Journal of Sound and Vibration 358: 84–96. doi:https://doi.org/10.1016/j.jsv.2015.08.019.
- Yi, Y. M., S. H. Park, and S. K. Youn. 2000. “Design of Microstructures of Viscoelastic Composites for Optimal Damping Characteristics.” International Journal of Solids and Structures 37: 4791–4810. doi:https://doi.org/10.1016/S0020-7683(99)00181-X.
- Yun, K. S., and S. K. Youn. 2018a. “Microstructural Topology Optimization of Viscoelastic Materials of Damped Structures Subjected to Dynamic Loads.” International Journal of Solids and Structures 147: 67–79. doi:https://doi.org/10.1016/j.ijsolstr.2018.04.022.
- Yun, K. S., and S. K. Youn. 2018b. “Topology Optimization of Viscoelastic Damping Layers for Attenuating Transient Response of Shell Structures.” Finite Elements in Analysis and Design 141: 154–165. doi:https://doi.org/10.1016/j.finel.2017.12.003.
- Zhang, H., X. Ding, H. Li, and M. Xiong. 2019. “Multi-scale Structural Topology Optimization of Free-Layer Damping Structures With Damping Composite Materials.” Composite Structures 212: 609–624. doi:https://doi.org/10.1016/j.compstruct.2019.01.059.
- Zhao, J., and C. Wang. 2016. “Dynamic Response Topology Optimization in the Time Domain Using Model Reduction Method.” Structural and Multidisciplinary Optimization 53 (1): 101–114. doi:https://doi.org/10.1007/s00158-015-1328-7.
- Zhao, X., B. Wu, Z. Li, and H. Zhong. 2018. “A Method for Topology Optimization of Structures Under Harmonic Excitations.” Structural and Multidisciplinary Optimization 58: 475–487. doi:https://doi.org/10.1007/s00158-018-1898-2.
- Zhao, J., H. Yoon, and B. D. Youn. 2019. “An Efficient Concurrent Topology Optimization Approach for Frequency Response Problems.” Computer Methods in Applied Mechanics and Engineering 347: 700–734. doi:https://doi.org/10.1016/j.cma.2019.01.004.
- Zhao, J., H. Yoon, and B. D. Youn. 2020. “An Adaptive Hybrid Expansion Method (AHEM) for Efficient Structural Topology Optimization Under Harmonic Excitation.” Structural and Multidisciplinary Optimization 61: 895–921. doi:https://doi.org/10.1007/s00158-019-02457-7.
- Zhu, J. H., P. Beckers, and W. H. Zhang. 2010. “On the Multi-component Layout Design With Inertial Force.” Journal of Computational and Applied Mathematics 234: 2222–2230. doi:https://doi.org/10.1016/j.cam.2009.08.073.