REFERENCES
- Chien , R.D. ; Chen , S.C. ; Lee , P.H. ; Huang , J.S. Study on the molding characteristics and mechanical properties of injection-molded foaming polypropylene parts . J. Reinf. Plast. Comp. 2004 , 23 ( 4 ), 429 – 444 .
- Ismail , H. ; Suryadiansyah . A comparative study of the effect of degradation on the properties of PP/NR and PP/RR blends . Polym. Plast. Technol. Eng. 2004 , 43 ( 2 ), 319 – 340 .
- Sain , M. ; Suhara , P. ; Law , S. ; Bouilloux , A. Interface modification and mechanical properties of natural fiber-polyolefin composite products . J. Reinf. Plast. Comp. 2005 , 24 ( 2 ), 121 – 130 .
- Yao , W. ; Jia , Y. ; An , L. ; Li , B. Elongational properties of biaxially oriented polypropylene with different processing properties . Polym. Plast. Technol. Eng. 2005 , 44 ( 3 ), 447 – 462 .
- Modesti , M. ; Lorenzetti , A. ; Bon , D. ; Besco , S. Effect of processing conditions on morphology and mechanical properties of compatibilized polypropylene nanocomposites . Polymer 2005 , 46 , 10237 – 10245 .
- Apichartpattanasiri , S. ; Hay , J.N. ; Kukureka , S.N. A study of the tribological behaviour of polyamide 66 with varying injection-molding parameters . Wear 2001 , 251 , 1557 – 1566 .
- Yang , Y.K. Optimization of injection molding process for mechanical and tribological properties of short glass fiber and polytetrafluoroethylene reinforced polycarbonate composites with grey relational analysis: A case study . Polym. Plast. Technol. Eng. 2006 , 45 ( 7 ), 769 – 777 .
- Fung , C.P. ; Hwang , J.R. ; Hsu , C.C. The effect of injection molding process parameters on the tensile properties of short glass fiber-reinforced PBT . Polym. Plast. Technol. Eng. 2003 , 42 , 45 – 63 .
- Tarng , Y.S. ; Yang , W.H. Application of Taguchi method to the optimization of the submerged arc welding process . Mater. Manuf. Process. 1998 , 13 ( 3 ), 455 – 467 .
- Connor , A.M. Parameter sizing for fluid power circuits using Taguchi method . Eng. Design 1999 , 10 ( 4 ), 377 – 390 .
- Liu , S.J. ; Chang , C.Y. The influence of processing parameters on thin-wall gas assisted injection molding of thermoplastic materials . J. Reinf. Plast. Comp. 2003 , 22 ( 8 ), 711 – 731 .
- Lin , C.L. Use of the Taguchi method and grey relational analysis to optimize turning operations with multiple performance characteristics . Mater. Manuf. Process. 2004 , 19 ( 2 ), 209 – 220 .
- Yang , Y.K. ; Tzeng , C.J. Die casting parameter sizing for AZ91D in notebook computer base shell . Mater. Manuf. Process. 2006 , 21 ( 5 ), 484 – 489 .
- Douglas , C.M. Design and Analysis of Experiments, , 4th Ed. , John Wiley & Sons, Inc. : New York , 1997 .
- Zalba , B. ; Belén , S. ; Marín , J.M. An experimental study of thermal energy storage with phase change materials by design of experiments . J. Appl. Stat. 2005 , 32 ( 4 ), 321 – 332 .
- Puertas; Luis , C.J. A study of optimization of machining parameters for electrical discharge machining of boron carbide . Mater. Manuf. Process. 2004 , 19 ( 6 ), 1041 – 1070 .
- Lin , T. ; Chananda , B. Quality improvement of an injection-molded product using design of experiments: a case study . Qual. Eng. 2004 , 16 ( 1 ), 99 – 104 .
- Myers , R.H. ; Montgomery , D.C. Response Surface Methodology, , 2nd Ed. , John Wiley and Sons Inc. : New York , 2002 .
- Minitab Inc., Quality Plaza, 1829 Pine Hall Road, State College, PA 16801–3008 .