Electromagnetic Field-Aided Magnetic Soft Mold Reverse Imprinting Technology Applied in Microstructure Replication

REFERENCES

• Moench , W. ; Zappe , H. Fabrication and testing of micro-lens arrays by all-liquid techniques . J. Optics A: Pure Appl. Optics 2004 , 6 , 330 – 337 .
   Google Scholar
• Weng , Y.J. ; Weng , Y.C. Technological development of advanced asymmetric magnetic soft mold micro-imprint lithography . Polym. Plast Tech Eng. 2010 , 7 , 713 – 717 .
   Google Scholar
• Wang , M.W. ; Jeng , J.H. Optimal molding parameter design of pla micro lancet needles using the taguchi method . Polym. Plast. Tech. Eng. 2009 , 7 , 730 – 735 .
   Google Scholar
• Beaunomt , J. ; Ralston , J. ; Shuttleworth , A. ; Camovale , M. Troubleshooting cavity to cavity variations in multi-cavity injection molds . J. Inject. Mold. Technol. 1999 , 3 , 88 – 99 .
   Google Scholar
• Kung , F.C. ; Weng , Y.J. Optimizations of the processing parameters of high performance engineering plastic in injection molding . Polym. Plast. Tech. Eng. 2008 , 11 , 1154 – 1161 .
   Google Scholar
• Eom , H. ; Park , K. Fully-coupled numerical analysis of high-frequency induction heating for thin-wall injection molding . Polym. Plast. Tech. Eng. 2009 , 10 , 1070 – 1077 .
   Google Scholar
• Bledzki , A.K. ; Faruk , O. Wood fiber reinforced polypropylene composites: compression and injection molding process . Polym. Plast. Tech. Eng. 2004 , 3 , 871 – 888 .
   Google Scholar
• Yao , D. ; Kim , B. ; Choi , J. ; Brown , R. Optimizing injection molding toward multiple quality and cost issues . Polym. Plast. Tech. Eng. 1999 , 5 , 955 – 966 .
   Google Scholar
• Moon , Y. ; Cha , S.-W. ; Seo , J.-H. Bubble nucleation and growth in microcellular injection molding processes . Polym. Plast. Tech. Eng. 2008 , 4 , 420 – 426 .
   Google Scholar
• Hong-wu , W. ; Hai-hang , X. ; Jin-ping , Q. ; Shao-dan , Z. Cavity pressure response and melt flow length during dynamic injection molding . Polym. Plast. Tech. Eng. 2006 , 8 , 935 – 937 .
   Google Scholar
• Shen , C.Y. ; Zhao , Z.F. ; Shi , X.Z. Fast calculating method and in-mold labeling model for cooling analysis in injection molding . Polym. Plast. Tech. Eng. 2006 , 8 , 985 – 995 .
   Google Scholar
• Yao , D. ; Kim , B. ; Choi , J. ; Brown , R. Optimizing injection molding toward multiple quality and cost issues . Polym. Plast. Tech. Eng. 1999 , 5 , 955 – 966 .
   Google Scholar
• Liebold , R. Injection molding of large-area glass fiber reinforced components. a comparison with compression molding from the processor's point of view . Polym. Plast. Tech. Eng. 1985 , 4 , 267 – 296 .
   Google Scholar
• Chang , J.H. ; Yang , S.Y. Gas pressurized hot embossing for transcription of micro-feartures . Microsyst. Technol. 2003 , 10 , 76 – 80 .
   Google Scholar
• Nezuka , O. ; Yao , D. ; Kim , B.H. Replication of microstructures by roll-to-roll uv-curing embossing . Polym. Plast. Tech. Eng. 2008 , 9 , 865 – 873 .
   Google Scholar
• Weng , Y.J. ; Weng , Y.C. ; Yang , S.Y. ; Huang , J.C. ; Fang , H.S. ; Wong , Y.C. A study of an innovative technology for manufacturing optical waveguides based on vacuum-assisted micromolding . Polym. Plast. Tech. Eng. 2008 , 11 , 1170 – 1173 .
   Google Scholar
• Wong , Y.C. ; Weng , Y.J. ; Weng , Y.C. ; Lee , J.Y. Development and study of applications combining nanopowder imprint lithography and array-type uv-curing technology for micro-lens molding . Polym. Plast. Tech. Eng. 2010 , 8 , 853 – 860 .
   Google Scholar
• Auhorn , M. ; Beck , T. ; Schulze , V. ; Lohe , D. Quasi-static and cyclic testing of specimens with high aspect ratios produced by micro-casting and micro-powder-injection-moulding . Microsyst. Technol. 2002 , 8 , 109 – 112 .
   Web of Science ®Google Scholar
• Mondal , S. ; Hu , J.L. Influence of film casting condition and thermal treatment on order structure of polyurethane block copolymer . Polym. Plast. Tech. Eng. 2007 , 4 , 353 – 359 .
   Google Scholar
• Weng , Y.J. ; Weng , Y.C. ; Yang , S.Y. Development and research for applying innovative magnetic soft mold imprinting techniques in microstructure component manufacturing . Polym. Adv. Technol. 2008 , 19 , 1177 – 1184 .
   Web of Science ®Google Scholar
• Weng , Y.J. ; Weng , Y.C. ; Yang , S.Y. ; Wang , L.A. Fabrication of optical waveguide devices using gas-assisted UV micro/nanoimprinting with soft mold . Polym. Adv. Technol. 2007 , 18 , 876 – 882 .
   Web of Science ®Google Scholar
• Guo , X. Study of curing kinetics of an epoxy-amine adhesive system using a calorimetric analysis approach . Polym. Plast. Tech. Eng. 2008 , 11 , 1109 – 1116 .
   Google Scholar
• Rozman , H.D. ; Faiza , M.A. ; Kumar , R.N. A preliminary study on ultraviolet radiation–cured biofiber composites from oil palm empty fruit bunch . Polym. Plast. Tech. Eng. 2008 , 4 , 358 – 362 .
   Google Scholar
• El-Zaher , N.A. Study of the effect of ultraviolet radiation on some physical properties of dralon fabric . Polym. Plast. Tech. Eng. 2002 , 5 , 689 – 702 .
   Google Scholar
• Hassiruzzaman , M. ; Khan , M.A. ; Idriss Ali , K.M. Weathering and thermal aging of ultraviolet-cured polymer films . Polym. Plast. Tech. Eng. 1999 , 1 , 113 – 125 .
   Google Scholar
• Wu , S. ; Sang , H. ; Liu , Z. ; Xu , X. Effect of reaction temperature on HDPE functionalized through ultraviolet irradiation . Polym. Plast. Tech. Eng. 2005 , 3 , 381 – 390 .
   Google Scholar
• Nezuka , O. ; Yao , D. ; Kim , B.H. Replication of microstructures by Roll-to-Roll UV-curing embossing . Polym. Plast. Tech. Eng. 2008 , 9 , 865 – 873 .
   Google Scholar
• Aliya , B.S. ; Khan , M.A. ; Mustafa , A.I. Modification of plywood surface with epoxy acrylate by photo-curing . Polym. Plast. Tech. Eng. 2003 , 1 , 123 – 138 .
   Google Scholar
• Huang , P.H. ; Huang , T.C. ; Sun , Y.T. ; Yang , S.Y. Fabrication of large-area resin microlens array using gas-assisted ultraviolet embossing . Optics Express. 2008 , 16 , 3041 – 3048 .
   PubMedGoogle Scholar
• Huang , X.D. ; Bao , L.R. ; Cheng , X. ; Guo , L.J. ; Pang , S.W. ; Yee , A.F. Reversal imprinting by transferring polymer from mold to substrate. J. Vac. Sci. Technol. B 2002, 20, 2872–2876.
   Google Scholar
• Chang , J.H. ; Cheng , F.S. ; Chao , C.C. ; Weng , Y.C. ; Yang , S.Y. ; Wang , L.A. Direct imprinting using soft mold and gas pressure for large area and curved surfaces . J. Vac. Sci. Technol. A 2005 , 23 , 1687 – 1690 .
   Google Scholar
• Kang , B.M. ; Park , Y.W. A study on phase separation of pa-pdms composites dependent on molecular weight . Polym. Plast. Tech. Eng. 2010 , 3 , 223 – 227 .
   Google Scholar
• Prakashan , K. ; Gupta , A.K. ; Maiti , S.N. Crystallization of polypropylene in pp/pdms/nano-sio2 ternary composite . Polym. Plast. Tech. Eng. 2009 , 7 , 775 – 780 .
   Google Scholar
• Kumar , S. ; Maiti , S.N. Studies on polycarbonate and polydimethylsiloxane rubber blends . Polym. Plast. Tech. Eng. 2007 , 4 , 427 – 433 .
   Google Scholar
• Chen , G.X. ; Liu , J.J. Morphology, crystallization behaviors, and mechanical properties of pa1010/hips and pa1010/hips-g-ma blends . Polym. Plast. Tech. Eng. 2000 , 3 , 529 – 542 .
   Google Scholar
• Weng , Y.J. ; Yang , S.Y. ; Wu , M.S. ; Weng , Y.C. ; Wang , L.A. A study on the innovative microlens projection lithography applied to the production of microstructures . Polym. Adv. Technol. 2007 , 18 , 841 – 844 .
   Google Scholar