Multi-Response Optimization of Injection Moulding Processing Parameters Using the Taguchi Method

REFERENCES

• Brent , S.A. Plastics Materials and Processing . Prentice Hall : Englewood Cliffs , NJ , 2000 .
   Google Scholar
• Chen , Z.B. ; Turng , L.S. A review of current developments in process and quality control for injection molding . Adv. Polym. Technol. 2005 , 24 ( 3 ), 165 – 182 .
   Web of Science ®Google Scholar
• Seaman , C.M. Multiobjective optimization of a plastic injection molding process . IEEE Trans. Contr. Syst. Technol. 1994 , 2 ( 3 ), 157 – 168 .
   Google Scholar
• Huang , M.C. ; Tai , C.C. The effective factors in the warpage problem of an injection-molded part with a thin shell feature . J. Mater. Proc. Technol. 2001 , 110 , 1 – 9 .
   Web of Science ®Google Scholar
• Taguchi , G. Introduction to Quality Engineering . McGraw-Hill : New York , 1990 .
   Google Scholar
• Peace , G.S. Taguchi Methods . Addison-Wesley Publishing Company, Taipei, Taiwan; 1993 , 281 – 291 .
   Google Scholar
• Taguchi , G. Introduction to Quality Engineering . Asian Productivity Organisation : Tokyo , 1986 .
   Google Scholar
• Yong , W.H. ; Tarng , Y.S. Design optimization of cutting parameters for turning operations based on Taguchi method . J. Mater. Proc. Technol. 1998 , 84 , 122 – 129 .
   Web of Science ®Google Scholar
• Kim , Y.J.; Cho B.R. Economic consideration on parameter design . Qual. Reliab. Eng. Inter. 2000 , 16 , 501 – 514 .
   Web of Science ®Google Scholar
• Antony , J. Simultaneous optimisation of multiple quality characteristics in manufacturing processes using Taguchi's quality loss function . Inter. J. Adv. Mfg. Technol. 2001 , 17 , 134 – 138 .
   Web of Science ®Google Scholar
• Ghani , J.A. ; Choudhury , I.A. ; Hassan , H.H. Application of Taguchi method in the optimization of end milling parameters . J. Mater. Proc. Technol. 2002 , 145 , 84 – 92 .
   Google Scholar
• Montgomery , D.C. Design and Analysis of Experiments. , 5th ed . John Wiley & Sons, Inc. : New York , 2001 .
   Google Scholar
• Antony , J. ; Kaye , M. Experimental Quality—A Strategic Approve to Achieve and Improve Quality . Kluwer Academic Publishers : Dordrecht , November , 1999 .
   Google Scholar
• Foster , W.T. Basic Taguchi Design of Experiments . National Association of Industrial Technology Conference, Pittsburgh : PA , 2000 .
   Google Scholar
• Yang , Y.K. ; Shie , J.R. ; Liao , H.T. ; Wen , J.L. ; Yang , R.T. A study of Taguchi and design of experiments method in injection molding process for polypropylene components . J. Reinfor. Plast. Compos. 2008 , 27 , 819 .
   Web of Science ®Google Scholar
• Tang , S.H. ; Tan , Y.J. ; Sapuan , S.M. ; Sulaiman , S. ; Ismail , N. ; Samin , R. The use of Taguchi method in the design of plastic injection mould for reducing warpage . J. Mater. Proc. Technol. 2007 , 182 , 418 – 426 .
   Web of Science ®Google Scholar
• Ozcelik , B. ; Sonat , I. Warpage and structural analysis of thin shell plastic in the plastic injection molding . Mater. Des. 2009 , 30 , 367 – 375 .
   Web of Science ®Google Scholar
• Gao , Y. ; Wang , X. Surrogate-based process optimization for reducing warpage in injection molding . J. Mater. Proc. Technol. 2009 , 209 , 1302 – 1309 .
   Web of Science ®Google Scholar
• Lee , B.H. ; Kim , B.H. Variation of part wall thicknesses to reduce warpage of injection-molded Part: Robust design against process variability . Polym.-Plast. Technol. Eng. 1997 , 36 ( 5 ), 791 – 807 .
   Web of Science ®Google Scholar
• Chang , T.C. ; Faison , E. Shrinkage behavior and optimization of injection molded parts studied by the Taguchi method . Polym. Eng. Sci. 2001 , 41 , 703 – 710 .
   Web of Science ®Google Scholar
• Oktem , H. ; Erzurumlu , T. ; Uzman , I. Application of Taguchi optimization technique in determining plastic injection molding process parameters for a thin-shell part . Mater. Des. 2007 , 28 , 1271 – 1278 .
   Web of Science ®Google Scholar
• Altan , M. Reducing shrinkage in injection moldings via the Taguchi, ANOVA and neural network methods . Materials and Design . 2010 , 31 , 599 – 604 .
   Web of Science ®Google Scholar
• Huang , H.X. ; Li , K.; Li S. Injection-compression molded part shrinkage uniformity comparison between semicrystalline and amorphous plastics . Polym.-Plast. Technol. Eng. 2008 , 48 ( 1 ), 64 – 68 .
   Web of Science ®Google Scholar
• Chen , R.S. ; Lee , H.H. ; Yu , C.Y. Application of Taguchi's method on the optimal process design of an injection molded PC/PBT automobile bumper . Compos. Struct. 1997 , 39 ( 3–4 ), 209 – 214 .
   Web of Science ®Google Scholar
• Erzurumlu , T. ; Ozcelik , B. Minimization of warpage and sink index in injection-molded thermoplastic parts using Taguchi optimization method . Mater. Des. 2006 , 27 ( 10 ), 853 – 861 .
   Web of Science ®Google Scholar
• Shen , C. ; Wang , L. ; Cao , W. ; Qian , L. Investigation of the effect of molding variables on sink marks of plastic injection molded parts using Taguchi DOE technique . Polym.-Plast. Technol. Eng. 2007 , 46 ( 3 ), 219 – 225 .
   Web of Science ®Google Scholar
• Wang , L. ; Li , Q. ; Shen , C. ; Lu , S. Effects of process parameters and two-way interactions on sink mark depth of injection molded parts by using the design of experiment method . Polym.-Plast. Technol. Eng. 2007 , 47 ( 1 ), 30 – 35 .
   Web of Science ®Google Scholar
• Liu , S.J. ; Yang , C.Y. Application of statistic estimation to weldline strength of injection molded thermoplastic composites . J. Reinfor. Plast. Compos. 2004 , 23 , 1383 .
   Web of Science ®Google Scholar
• Lin , Y.H. ; Deng , W.J. ; Huang , C.H. ; Yang , Y.K. Optimization of injection molding process for tensile and wear properties of polypropylene components via Taguchi and design of experiments method . Polym.-Plast. Technol. Eng. 2007 , 47 ( 1 ), 96 – 105 .
   Web of Science ®Google Scholar
• Ting , P.H. ; Hsu , C.I. ; Hwang , J.R. Optimization of the wear properties of polyoxymethylene components under injection process conditions . Polym.-Plast. Technol. Eng. 2010 , 49 ( 9 ), 892 – 899 .
   Web of Science ®Google Scholar
• Cheng , W.S. ; Chen , C.S. ; Chen , S.C. ; Chien , R.D. Investigation of the effects of injection molding processing parameters on conductive polymeric composites for electromagnetic interference shielding effectiveness . Polym.-Plast. Technol. Eng. 2009 , 48 ( 2 ), 216 – 220 .
   Web of Science ®Google Scholar
• Wang , M.W. ; Jeng , J.H. Optimal molding parameter design of PLA micro lancet needles using the Taguchi method . Polym.-Plast. Technol. Eng. 2009 , 48 ( 7 ), 730 – 735 .
   Web of Science ®Google Scholar
• Kuo , C.F.J. ; Su , T.L. Multiple quality characteristics optimization of precision injection molding for LCD light guide plates . Polym.-Plast. Technol. Eng. 2007 , 46 ( 5 ), 495 – 505 .
   Web of Science ®Google Scholar
• Khan , Z.A. ; Kamaruddin , S. ; Siddiquee , A.N. Feasibility study of use of recycled High Density Polyethylene and multi-response optimization of injection moulding parameters using combined grey relational and principal component analyses . Mater. Des. 2010 , 31 , 2925 – 2931 .
   Web of Science ®Google Scholar
• Deng , W.J. ; Chen , C.T. ; Sun , C.H. ; Chen , W.C. ; Chen , C.P. An effective approach for process parameter optimization in injection molding of plastic housing components . Polym.-Plast. Technol. Eng. 2008 , 47 ( 9 ), 910 – 919 .
   Web of Science ®Google Scholar
• Oktem , H. ; Erzurumlu , T. ; Uzman , I. Application of Taguchi optimization technique in determining plastic injection molding process parameters for a thin-shell part . Mater. Des. 2007 , 28 , 1271 – 1278 .
   Web of Science ®Google Scholar
• Anthony , J. ; Perry , D. ; Wang , C. ; Kumar , M. An application of Taguchi method of experimental design for new product design and development process . Assem. Auto. 2006 , 26 ( 1 ), 18 – 24 .
   Web of Science ®Google Scholar
• Roy , R.K. A Primer On The Taguchi Method . Van Nostrand Reinhold : New York , NY , 1990 .
   Google Scholar