Simultaneous Control of Birefringence and Warpage for Thermoplastic Optical Lenses Fabricated Using Microinjection Molding

REFERENCES

• Kim, S.K.; Kim, D.-J.; Jung, J.S.; Cho, Y. Flow instability of semicrystalline polymer melt during micro-injection molding. J. Micromech. Microeng. 2014, 24, 085015.
   Web of Science ®Google Scholar
• Giboz, J.; Copponnex, T.; Mélé, P. Microinjection molding of thermoplastic polymers: A review. J. Micromech. Microeng. 2007, 17, R96–R109.
   Web of Science ®Google Scholar
• Attia, U.M.; Marson, S.; Alcock, J.R. Micro-injection moulding of polymer microfluidic devices. Microfluid. Nanofluid. 2009, 7, 1–28.
   Web of Science ®Google Scholar
• Yang, C.; Yin, X.-H.; Cheng, G.M. Microinjection molding of microsystem components: New aspects in improving performance. J. Micromech. Microeng. 2013, 23, 093001.
   Web of Science ®Google Scholar
• Zhang, J.; Zhang, L.; Liu, H.; Liu, F.H.; Guo, C. Study of micro-injection moulding: Factors affecting the content of the β-phase in isotactic polypropylene with β-nucleating agent. Polym. Plast. Technol. Eng. 2012, 51, 1032–1037.
   Web of Science ®Google Scholar
• Chen, S.-C.; Li, H.-M.; Hsu, P.-M.; Peng, H.-S. Effects of processing parameters on tensile strength of thin-wall HDPE parts injection molded by ultra high-speed process. Polym. Plast. Technol. Eng. 2011, 50, 276–281.
   Web of Science ®Google Scholar
• Yang, C.; Su, L.; Huang, C.; Huang, H.-X.; Castro, J.M.; Yi, A.Y. Effect of packing pressure on refractive index variation in injection molding of precision plastic optical lens. Adv. Polym. Technol. 2011, 30, 51–61.
   Web of Science ®Google Scholar
• Sadeghi, S.; Nazockdast, H.; Mehranpour, M. The birefringence and anisotropic planar shrinkage of polycarbonate/organoclay injection moldings. Polym. Eng. Sci. 2012, 52, 2182–2195.
   Web of Science ®Google Scholar
• Huang, H.-X.; Yang, C.; Li, K. Effects of process parameters on shrinkage uniformity and birefringence of injection-compression molded parts, ASME Proc., Boston, MA, Oct 31–Nov 6, 2008.
   Google Scholar
• Chen, M.; Yao, D.; Kim, B. Eliminating flow induced birefringence and minimizing thermally induced residual stresses in injection molded parts. Polym. Plast. Technol. Eng. 2001, 40, 491–503.
   Web of Science ®Google Scholar
• Carrillo, A.J.; Isayev, A.I. Flow and thermally induced birefringence in gas-assisted tubular injection moldings: Simulation and experiment. Polym. Eng. Sci. 2013, 53, 623–643.
   Web of Science ®Google Scholar
• Gui, D.Y.; Ernst, L.J.; Jansen, K.M.B.; Yang, D.G.; Goumans, L.; Bressers, H.J.L.; Janssen, J.H.J. Effects of molding pressure on the warpage and the viscoelasticities of HVQFN packages. J. Appl. Polym. Sci. 2008, 109, 2016–2022.
   Web of Science ®Google Scholar
• Chiang, Y.-C.; Cheng, H.-C.; Huang, C.-F.; Lee, J.-L.; Lin, Y.; Shen, Y.-K. Warpage phenomenon of thin-wall injection molding. Int. J. Adv. Manuf. Technol. 2011, 55, 517–526.
   Web of Science ®Google Scholar
• Azaman, M.D.; Sapuan, S.M.; Sulaiman, S.; Zainudin, E.S.; Khalina, A Shrinkages and warpage in the processability of wood-filled polypropylene composite thin-walled parts formed by injection molding. Mater. Des. 2013, 52, 1018–1026.
   Web of Science ®Google Scholar
• Kim, J.Y.; Kim, S.Y.; Song, Y.S.; Youn, J.R. Relationship between the crystallization behavior and the warpage of film-insert-molded parts. J. Appl. Polym. Sci. 2011, 120, 1539–1546.
   Web of Science ®Google Scholar
• Yang, C. Flow-induced morphology evolution of uniformly miniaturized high-density polyethylene parts prepared by micro-injection molding. Int. J. Adv. Manuf. Technol. 2013, 68, 1745–1755.
   Web of Science ®Google Scholar
• Annicchiarico, D.; Attia, U.M.; Alcock, J.R. Part mass and shrinkage in micro injection moulding: Statistical based optimisation using multiple quality criteria. Polym. Test. 2013, 32, 1079–1087.
   Web of Science ®Google Scholar
• Chuang, M.-T.; Yang, Y.-K.; Hsiao, Y.-H. Modeling and optimization of injection molding process parameters for thin-shell plastic parts. Polym. Plast. Technol. Eng. 2009, 48, 745–753.
   Web of Science ®Google Scholar