Phase Inversion Technique-Based Polyamide Films and Their Applications: A Comprehensive Review

References

• Pourfayaz, F.; Jafari, S.H.; Mortazavi, Y.; Khodadadi, A.A.; Khonakdar, H.A. Combination of plasma functionalization and phase inversion process techniques for efficient dispersion of MWCNTs in Polyamide 6: Assessment through morphological, electrical, rheological and thermal properties. Polym.-Plast. Technol. Eng. 2015, 54, 632–638.
   Web of Science ®Google Scholar
• Kashani, T.; Jahanshahi, M.; Rahimpour, A.; Peyravi, M. Nano pore molecularly imprinted polymer membranes for environmental usage: Selective separation of 2,4-dichlorophenoxyacetic acid as a toxic herbicide from water. Polym.-Plast. Technol. Eng. 2016. doi:10.1080/03602559.2016.1171876
   Web of Science ®Google Scholar
• Tul Muntha, S.; Kausar, A.; Siddiq, M. Progress on polymer-based membranes in gas separation technology. Polym.-Plast. Technol. Eng. 2015, 55, 1282–1298.
   Web of Science ®Google Scholar
• Haider, S.; Kausar, A.; Muhammad, B. Research advancement in high performance polyamides and polyamide blends loaded with layered silicate. Polym.-Plast. Technol. Eng. 2016, 55, 1536–1556.
   Web of Science ®Google Scholar
• Gul, S.; Kausar, A.; Mehmood, M.; Muhammad, B.; Jabeen, S. Progress on epoxy/polyamide and inorganic nanofiller-based hybrids: Introduction, application and future potential. Polym.-Plast. Technol. Eng. 2016. doi:10.1080/03602559.2016.1185628
   Web of Science ®Google Scholar
• Ghasemi, H.; Mirzadeh, A.; Bates, P.J.; Kamal, M.R. Effect of polyamide 66 on the mechanical and thermal properties of post-industrial waste polyamide 6. Polym.-Plast. Technol. Eng. 2014, 53, 1794–1803.
   Web of Science ®Google Scholar
• Kim, C.K.; Kim, S.S.; Kim, D.W.; Lim, J.C.; Kim, J.J. Removal of aromatic compounds in the aqueous solution via micellar enhanced ultrafiltration: Part 1. Behavior of nonionic surfactants. J. Membrane Sci. 1998, 147, 13–22.
   Web of Science ®Google Scholar
• Kugel, A.; He, J.; Samanta, S.; Bahr, J.; Lattimer, J.L.; Fuqua, M.A.; Ulven, C.A.; Chisholm, B.J. Semicrystalline polyamide engineering thermoplastics based on the renewable monomer, 1,9-nonane diamine: Thermal properties and water absorption. Polym.-Plast. Technol. Eng. 2012, 51, 1266–1274.
   Web of Science ®Google Scholar
• Boom, R.M.; Wienk, I.M.; Boomgaard van den, T.; Smolders, C.A. Microstructures in phase inversion membranes. Part 2. The role of the polymer additive. J. Membrane Sci. 1992, 73, 277–292.
   Google Scholar
• Boom, R.M.; Boomgaard van den, T.; Smolders, C.A. Mass transfer and thermodynamics during immersion precipitation for a two-polymer system: Evaluation with the systems PES–PVP–NMP–water. J. Membrane Sci. 1994, 90, 231–249.
   Web of Science ®Google Scholar
• Saechtling, W.W. In: Hanser ed. International Plastics Handbook for Technologists and Users, 3rd ed., Gardner Publishers: Cincinnati, 1995, p. 256.
   Google Scholar
• Li, D.; Wang, H-C.; Lee, A.F. In: Salamone, J.C., ed. Polyamides (impact toughness and toughening), Vol. 1: Polymeric Materials Encyclopedia, CRC Press: New York, 1996, p. 5409.
   Google Scholar
• Chernukhina, I.; Gabrielyan, G.A. Thermal stabilization of aliphatic polyamides and fibres based on them—A review. Fibre Chem 1994, 25, 468–473.
   Google Scholar
• Brucato, V.; Crippa, G.; Piccarolo, S.; Titomanlio, G. Crystallization of polymer melts under fast cooling. I: Nucleated polyamide 6. Polym. Engineer. Sci. 1991, 31, 1411–1416.
   Web of Science ®Google Scholar
• Starkova, O.; Yang, J.; Zhang, Z. Application of time–stress superposition to nonlinear creep of polyamide 66 filled with nanoparticles of various sizes. Compos. Sci. Technol. 2007, 67, 2691–2698.
   Web of Science ®Google Scholar
• Davis, A.P.; Wareham, R.S. A tricyclic polyamide receptor for carbohydrates in organic media. Angew. Chem. Int. Ed. 1998, 37, 2270–2273.
   Web of Science ®Google Scholar
• Weber, J.; Su, Q.; Antonietti, M.; Thomas, A. Exploring polymers of intrinsic microporosity–microporous, soluble polyamide and polyimide. Macromol. Rapid Commun. 2007, 28, 1871–1876.
   Web of Science ®Google Scholar
• Lau, W.J.; Gray, S.; Matsuura, T.; Emadzadeh, D.; Chen, J.P.; Ismail, A.F. A review on polyamide thin film nanocomposite (TFN) membranes: History, applications, challenges and approaches. Water Res. 2015, 80, 306–324.
   PubMed Web of Science ®Google Scholar
• Emadzadeh, D.; Lau, W.J.; Rahbari-Sisakht, M.; Daneshfar, A.; Ghanbari, M.; Mayahi, A.; Matsuura, T.; Ismail, A.F. A novel thin film nanocomposite reverse osmosis membrane with superior anti-organic fouling affinity for water desalination. Desalination 2015, 368, 106–113.
   Web of Science ®Google Scholar
• Ghanbari, M.; Emadzadeh, D.; Lau, W.J.; Matsuura, T.; Ismail, A.F. Synthesis and characterization of novel thin film nanocomposite reverse osmosis membranes with improved organic fouling properties for water desalination. RSC Adv. 2015, 5, 21268–21276.
   Web of Science ®Google Scholar
• Bulte, A.M.W.; Folkers, B.; Mulder, M.H.V.; Smolders, C.A. Membranes of semicrystalline aliphatic polyamide nylon 4,6: Formation by diffusion‐induced phase separation. J. Appl. Polym. Sci. 1993, 50, 13–26.
   Web of Science ®Google Scholar
• Cheng, L.P.; Dwan, A.H.; Gryte, C.C. Membrane formation by isothermal precipitation in polyamide-formic acid-water systems. I. Description of membrane morphology. J. Polym. Sci. B Polym. Phys. 1995, 33, 211–222.
   Web of Science ®Google Scholar
• Dedecker, K.; Groeninckx, G. Interfacial graft copolymer formation during reactive melt blending of polyamide 6 and styrene-maleic anhydride copolymers. Macromolecules 1999, 32, 2472–2479.
   Web of Science ®Google Scholar
• Jegal, J.; Min, S.G.; Lee, K.H. Factors affecting the interfacial polymerization of polyamide active layers for the formation of polyamide composite membranes. J. Appl. Polym. Sci. 2002, 86, 2781–2787.
   Web of Science ®Google Scholar
• Freger, V. Nanoscale heterogeneity of polyamide membranes formed by interfacial polymerization. Langmuir 2003, 19, 4791–4797.
   Web of Science ®Google Scholar
• Demirel, A.L.; Meyer, M.; Schlaad, H. Formation of polyamide nanofibers by directional crystallization in aqueous solution. Angew. Chem. Int. Ed. 2007, 46, 8622–8624.
   PubMed Web of Science ®Google Scholar
• Oishi, Y.; Takado, H.; Yoneyama, M.; Kakimoto, M.A.; Imai, Y. Preparation and properties of new aromatic polyamides from 4,4′-diaminotriphenylamine and aromatic dicarboxylic acids. J. Polym. Sci. A Polym. Chem. 1990, 28, 1763–1769.
   Web of Science ®Google Scholar
• Yang, C.P.; Hsiao, S.H.; Yang, H.W. Synthesis and characterization of aromatic polyamides based on a bis(ether-carboxylic acid) or a dietheramine derived from tert-butylhydroquinone. Macromol. Chem. Phys. 1999, 200, 1528–1534.
   Web of Science ®Google Scholar
• Liou, G.S.; Hsiao, S.H.; Ishida, M.; Kakimoto, M.; Imai, Y. Synthesis and characterization of novel soluble triphenylamine‐containing aromatic polyamides based on N,N′-bis(4-aminophenyl)-N,N′-diphenyl-1,4-phenylenediamine. J. Polym. Sci. A Polym. Chem. 2001, 40, 2810–2818.
   Web of Science ®Google Scholar
• Uribe-Arocha, P.; Mehler, C.; Puskas, J.E.; Altstadt, V. Effect of sample thickness on the mechanical properties of injection-molded polyamide-6 and polyamide-6 clay nanocomposites. Polymer 2003, 44, 2441–2446.
   Web of Science ®Google Scholar
• Cohen, C.; Tanny, G.B.; Prager, S. Diffusion controlled formation of porous structures in ternary polymer systems. J. Polym. Sci. Polym. Phys. Ed. 1979, 17, 477–489.
   Web of Science ®Google Scholar
• Reuvers, A.J.; van den Berg, J.W.A.; Smolders, C.A. Formation of membranes by means of immersion precipitation. I. A model to describe mass transfer during immersion precipitation. J. Membrane Sci. 1987, 34, 45–65.
   Google Scholar
• Radovanovic, P.; Thiel, S.W.; Hwang, S.T. Formation of asymmetric polysulfone membranes by immersion precipitation. Part I. Modelling mass transport during gelation. J. Membrane Sci. 1992, 65, 213–229.
   Web of Science ®Google Scholar
• Radovanovic, P.; Thiel, S.W.; Hwang, S.T. Formation of asymmetric polysulfone membranes by immersion precipitation. Part II: The effects of casting solution and gelation bath compositions on membrane structure and skin formation. J. Membrane Sci. 1992, 65, 231–246.
   Web of Science ®Google Scholar
• Smolders, C.A.; Reuvers, A.J.; Boom, R.M.; Wienk, I.M. Microstructures in phase-inversion membranes. Part 1. Formation of macrovoids. J. Membrane Sci. 1992, 73, 259–275.
   Web of Science ®Google Scholar
• Chawla, A.S.; Chang, T.M.S. Use of solubility parameters for the preparation of hemodialysis membranes. J. Appl. Polym. Sci. 1975, 19, 1723–1730.
   Web of Science ®Google Scholar
• Bottino, A.; Capnnelli, G.; Munari, S. Effect of coagulation medium on properties of sulfonated polyvinylidene membranes. J. Appl. Polym. Sci. 1985, 30, 3009–3022.
   Web of Science ®Google Scholar
• So, M.T.; Eirich, F.R.; Strathmann, H.; Baker, R.W. Preparation of asymmetric Loeb–Sourirajan membranes. J. Polym. Sci. Polym. Lett. Ed. 1973, 11, 201–205.
   Web of Science ®Google Scholar
• Cabasso, I.; Klein, E.; Smith, J.K. Polysulfone hollow fibers. I. Spinning and properties. J. Appl. Polym. Sci. 1976, 20, 2377–2394.
   Web of Science ®Google Scholar
• Uragami, T.; Ohsumi, Y.; Sugihara, M. Studies on syntheses and permeabilities of special polymer membranes: 38. Formation mechanism of finger-like cavities in membranes from cellulose nitrate and single solvent. Polymer 1982, 23, 999.
   Web of Science ®Google Scholar
• Lonsdale, H.K. The growth of membrane technology. J. Membrane Sci. 1982, 10, 81–181.
   Web of Science ®Google Scholar
• Pusch, W.; Walch, A. Synthetic membranes-preparation, structure and, application. Angew. Chem. Int. Ed. Engl. 1982, 21, 660–685.
   Web of Science ®Google Scholar
• Hester, J.F.; Banerjee, P.; Mayes, A.M. Preparation of protein-resistant surfaces on poly(vinylidene fluoride) membranes via surface segregation. Macromolecules 1999, 32, 1643–1650.
   Web of Science ®Google Scholar
• Wijmans, J.G.; Smolders, C.A. Preparation of asymmetric membranes by the phase inversion process. in H.K. Londsdale and M.H. Pinho (Eds.), Synthetic Membranes: Science, Engineering and Applications, Reidel: Dordrecht, The Netherlands, 1986, pp. 39–56.
   Google Scholar
• Zeman, L.; Fraser, T. Formation of air-cast cellulose acetate membranes. Part I. Study of macrovoid formation. J. Membrane Sci. 1993, 84, 93–106.
   Web of Science ®Google Scholar
• Zeman, L.; Fraser, T. Formation of air-cast cellulose acetate membranes. Part II. Kinetics of demixing and microvoid growth. J. Membrane Sci. 1994, 87, 267–279.
   Web of Science ®Google Scholar
• Usuki, A.; Kojima, Y.; Kawasumi, M.; Okada, A.; Fukushima, Y.; Kurauchi, T.; Kamigaito, O.J. Synthesis of nylon 6-clay hybrid. Mater. Res. 1993, 8, 1179–1184.
   Google Scholar
• Kojima, Y.; Usuki, A.; Kojima, Y.; Kawasumi, M.; Okada, A.; Fukushima, Y.; Kurauchi, T.; Kamigaito, O. Mechanical properties of nylon 6-clay hybrid. J. Mater. Res. 1993, 8, 1185–1189.
   Web of Science ®Google Scholar
• Ray, S.S.; Okamoto, M. Polymer/layered silicate nanocomposites: A review from preparation to processing. Progr. Polym. Sci. 2003, 28, 1539–1641.
   Web of Science ®Google Scholar
• Wu, S.H.; Wang, F.Y.; Ma, C-C.M.; Chang, W.C.; Kuo, C-T.; Kuan, H-C.; Chen W-J. Mechanical, thermal and morphological properties of glass fiber and carbon fiber reinforced polyamide-6 and polyamide-6/clay nanocomposites. Mater. Lett. 2001, 49, 327–333.
   Web of Science ®Google Scholar
• Fornes, T.D.; Yoon, P.J.; Hunter, D.L.; Keskkula, H.; Paul, D.R. Effect of organoclay structure on nylon 6 nanocomposite morphology and properties. Polymer 2002, 43, 5915–5933.
   Web of Science ®Google Scholar
• Kashiwagi, T.; Harris Jr., R.H.; Zhang, X.; Briber, R.M.; Cipriano, B.H.; Raghavan, S.R.; Awad, W.H.; Shields, J.R. Flame retardant mechanism of polyamide 6–clay nanocomposites. Polymer 2004, 45, 881–891.
   Web of Science ®Google Scholar
• Strathmann, H. Production of microporous media by phase inversion processes. ACS Symp. Ser. 1985, 269, 165–195.
   Google Scholar
• Strathmann H.; Koch, K. The formation mechanism of phase inversion membranes. Desalination 1977, 21, 241–2455.
   Web of Science ®Google Scholar
• Tsay, C.S.; McHugh, A.J. Mass transfer dynamics of the evaporation step in membrane formation by phase inversion. J. Membrane Sci. 1991, 64, 81–92.
   Web of Science ®Google Scholar
• Tsay, C.S.; McHugh, A.J. The combined effects of evaporation and quench steps on asymmetric membrane formation by phase inversion. J. Polym. Sci. B Polym. Phys. 1991, 29, 1261–1270.
   Web of Science ®Google Scholar
• McHugh, A.J.; Tsay, C.S. Dynamics of the phase inversion process. J. Appl. Polym. Sci. 1992, 46, 2011–2021.
   Web of Science ®Google Scholar
• Zeni, M.; Riveros, R.; de Souza, J.F.; Mello, K.; Meireles, C.; Rodrigues Filho, G. Morphologic analysis of porous polyamide 6,6 membranes prepared by phase inversion. Desalination 2008, 221, 294–297.
   Web of Science ®Google Scholar
• Li, D.; Chung, T.S.; Ren, J.; Wang, R. Thickness dependence of macrovoid evolution in wet phase-inversion asymmetric membranes. Ind. Eng. Chem. Res. 2004, 43, 1553–1556.
   Web of Science ®Google Scholar
• Poletto, P.; Duarte, J.; Thürmer, M.B.; Santos, V.D.; Zeni, M. Characterization of polyamide 66 membranes prepared by phase inversion using formic acid and hydrochloric acid such as solvents. Mater. Res. 2011, 14, 547–551.
   Web of Science ®Google Scholar
• Serpe, G.; Jarrin, J.; Dawans, F. Morphology-processing relationships in polyethylene–polyamide blends. Polym. Eng. Sci. 1990, 30, 553–565.
   Web of Science ®Google Scholar
• Hietaoja, P.T.; Holsti-Miettinen, R.M.; Seppälä, J.V.; Ikkala, O.T. The effect of viscosity ratio on the phase inversion of polyamide 66/polypropylene blends. J. Appl. Polym. Sci. 1994, 54, 1613–1623.
   Web of Science ®Google Scholar
• Kitayama, N.; Keskkula, H.; Paul, D.R. Reactive compatibilization of nylon 6/styrene–acrylonitrile copolymer blends. Part 1. Phase inversion behavior. Polymer 2000, 41 (22), 8041–8052.
   Web of Science ®Google Scholar
• Charoensirisomboon, P.; Chiba, T.; Inoue, T.; Weber, M. In situ formed copolymers as emulsifier and phase-inversion-aid in reactive polysulfone/polyamide blends. Polymer 2000, 41, 5977–5984.
   Web of Science ®Google Scholar
• Li, Y.; Shimizu, H. Novel morphologies of poly(phenylene oxide) (PPO)/polyamide 6 (PA6) blend nanocomposites. Polymer 2004, 45, 7381–7388.
   Web of Science ®Google Scholar
• Lyngaae-Jørgensen, J.; Utracki, L.A. Dual phase continuity in polymer blends. Makromol. Chem. Macromol. Symp. 1991, 48, 189–209.
   Google Scholar
• Kudva, R.A.; Keskkula, H.; Paul, D.R. Morphology and mechanical properties of compatibilized nylon 6/polyethylene blends. Polymer 1999, 40, 6003–6021.
   Web of Science ®Google Scholar
• González‐Montiel, A.; Keskkula, H.; Paul, D.R. Morphology of nylon 6/polypropylene blends compatibilized with maleated polypropylene. J. Polym. Sci. B Polym. Phys. 1995, 33, 1751–1767.
   Web of Science ®Google Scholar
• Jordhamo, G.M.; Manson, J.A.; Sperling, L.H. Phase continuity and inversion in polymer blends and simultaneous interpenetrating networks. Polym. Eng. Sci. 1986, 26, 517–524.
   Web of Science ®Google Scholar
• Kitayama, N.; Keskkula, H.; Paul, D.R. Reactive compatibilization of nylon 6/styrene–acrylonitrile copolymer blends. Part 2. Dispersed phase particle size. Polymer 2000, 41, 8053–8060.
   Google Scholar
• Kitayama, N.; Keskkula, H.; Paul, D.R. Reactive compatibilization of nylon 6/styrene–acrylonitrile copolymer blends: Part 3. Tensile stress–strain behavior. Polymer 2000, 42, 3751–3759.
   Google Scholar
• Garcia, M.; Barsema, J.; Galindo, R.E.; Cangialosi, D.; Garcia-Turiel, J.; van Zyl, W.E.; Verweij, H.; Blank, D.H.. Hybrid organic–inorganic nylon‐6/SiO2 nanocomposites: Transport properties. Polym. Eng. Sci. 2004, 44, 1240–1246.
   Web of Science ®Google Scholar
• Freger, V. Swelling and morphology of the skin layer of polyamide composite membranes: An atomic force microscopy study. Environ. Sci. Technol. 2004, 38, 3168–3175.
   PubMed Web of Science ®Google Scholar
• Vatanpour, V.; Madaeni, S.S.; Moradian, R.; Zinadini, S.; Astinchap, B. Fabrication and characterization of novel antifouling nanofiltration membrane prepared from oxidized multiwalled carbon nanotube/polyethersulfone nanocomposite. J. Membrane Sci. 2011, 375, 284–294.
   Web of Science ®Google Scholar
• Wang, P.; Ma, J.; Shi, F.; Ma, Y.; Wang, Z.; Zhao, X. Behaviors and effects of differing dimensional nanomaterials in water filtration membranes through the classical phase inversion process: A review. Ind. Eng. Chem. Res. 2013, 52, 10355–10363.
   Web of Science ®Google Scholar
• Jeong, B-H.; Hoek, E.M.V.; Yan, Y. Interfacial polymerization of thin film nanocomposites: A new concept for reverse osmosis membranes. J. Membrane Sci. 2007, 294, 1–7.
   Web of Science ®Google Scholar
• Perreault, F.; Tousley, M.E.; Elimelech, M. Thin-film composite polyamide membranes functionalized with biocidal graphene oxide nanosheets. Environ. Sci. Technol. Lett. 2013, 1, 71–76.
   Web of Science ®Google Scholar
• Cho, Y.H., Han, J.; Han, S.; Guiver, M.D.; Park, H.B. Polyamide thin-film composite membranes based on carboxylated polysulfone microporous support membranes for forward osmosis. J. Membrane Sci. 2013, 445, 220–227.
   Web of Science ®Google Scholar
• Boudreau, B.P. The diffusive tortuosity of fine-grained unlithified sediments. Geochim. Cosmochim. Ac. 1996, 60, 3139–3142.
   Web of Science ®Google Scholar
• Yan, D.G.; Yang, G.S. Effect of multiwalled carbon nanotubes on the morphology and electrical properties of polyamide 6/polystyrene blends prepared via successive polymerization. J. Appl. Polym. Sci. 2012, 125, E167–E174.
   Web of Science ®Google Scholar
• Cheng, L.P.; Lin, D.J.; Yang, K.C. Formation of mica-intercalated-nylon 6 nanocomposite membranes by phase inversion method. J. Membrane Sci. 2000, 172, 157–166.
   Web of Science ®Google Scholar
• Petersen, R.J. Composite reverse osmosis and nanofiltration membranes. J. Membrane Sci. 1993, 83, 81–150.
   Web of Science ®Google Scholar
• Rodemann, K.; Staude, E. Synthesis and characterization of a±nity membranes made from polysulfone. J. Membrane Sci. 1994, 88, 271–278.
   Web of Science ®Google Scholar
• Shukla, A.K.; Christensen, P.A.; Hamnett, A.; Hogarth, M.P. A vapour-feed direct-methanol fuel cell with proton-exchange membrane electrolyte. J. Power Sources 1995, 55, 87.
   Google Scholar
• Ren, X.; Wilson, M.; Gottesfeld, S.J. High performance direct methanol polymer electrolyte fuel cells. Electrochem. Soc. 1996, 143, L12–L15.
   Google Scholar
• Antonucci, P.L.; Arico, A.S.; Cretı, P.; Ramunni, E.; Antonucci, V. Investigation of a direct methanol fuel cell based on a composite Nafion®-silica electrolyte for high temperature operation. Solid State Ion. 1999, 125, 431–437.
   Web of Science ®Google Scholar
• Schmidt-Rohr, K.; Chen, Q. Parallel cylindrical water nanochannels in Nafion fuel-cell membranes. Nat. Mater 2008, 7, 75–83.
   PubMed Web of Science ®Google Scholar
• Deyrail, Y.; Mighri, F.; Bousmina, M.; Kaliaguine, S. Polyamide/polystyrene blend compatibilisation by montmorillonite nanoclay and its effect on macroporosity of gas diffusion layers for proton exchange membrane fuel cells. Fuel Cells 2007, 7, 447–452.
   Web of Science ®Google Scholar
• Salgada, A.J.; Coutinho, O.P.; Reis, R.L. Bone tissue engineering: State of the art and future trends. Macromol. Biosci. 2004, 4, 743–765.
   PubMed Web of Science ®Google Scholar
• Koji, H.; Naohide, T.; Takafumi, Y.; Yoshinori, T. Prospects for bone fixation—Development of new cerclage fixation techniques. Mater. Sci. Eng. C. 2001, 17, 19–26.
   Google Scholar
• Upadhyay, D.J.; Cui, N-Y.; Anderson, C.A.; Brown, N.M.D. A comparative study of the surface activation of polyamides using an air dielectric barrier discharge. Colloids Surf. A 2004, 248, 47–56.
   Web of Science ®Google Scholar
• Wang, H.; Li, Y.; Zuo, Y.; Li, J.; Ma, S.; Cheng, L. Biocompatibility and osteogenesis of biomimetic nano-hydroxyapatite/polyamide composite scaffolds for bone tissue engineering. Biomaterials 2007, 28, 3338–3348.
   PubMed Web of Science ®Google Scholar
• Huang, D.; Zuo, Y.; Zou, Q.; Wang, Y.; Gao, S.; Wang, X.; Liu, H.; Li, Y. Reinforced nanohydroxyapatite/polyamide 66 scaffolds by chitosan coating for bone tissue engineering. J. Biomed. Mater. Res. B Appl. Biomater. 2012, 100, 51–57.
   PubMed Web of Science ®Google Scholar
• Sedlarik, V.; Otgonzul, O.; Kitano, T.; Gregorova, A.; Hrabalova, M.; Junkar, I.; Cvelbar, U.; Mozetic, M.; Saha, P. Effect of phase arrangement on solid state mechanical and thermal properties of polyamide 6/polylactide based co-polyester blends. J. Macromol. Sci. B. 2012, 51, 982–1001.
   Web of Science ®Google Scholar
• Wu, D.; Zhang, Y.; Zhang, M.; Zhou, W. Phase behavior and its viscoelastic response of polylactide/poly(ε-caprolactone) blend. Eur. Polym. J. 2008, 44, 2171–2183.
   Web of Science ®Google Scholar
• Stern, S.A. Polymers for gas separations: The next decade. J. Membrane Sci. 1994, 94, 1–65.
   Web of Science ®Google Scholar
• Clausi, D.T.; Koros, W.J. Formation of defect-free polyimide hollow fiber membranes for gas separations. J. Membrane Sci. 2000, 167, 79–89.
   Web of Science ®Google Scholar
• Madaeni, S.S.; Farhadian, A.; Vatanpour, V. Effects of phase inversion and composition of casting solution on morphology and gas permeance of polyethersulfone/polyimide blend membranes. Adv. Polym. Technol. 2012, 31, 298–309.
   Web of Science ®Google Scholar
• Ekiner, O.M.; Simmons, J.W. Gas separation membranes made from blends of aromatic polyamide, polyimide or polyamide-imide polymers. U.S. Patent 5,248,319, September 28, 1993.
   Google Scholar
• Bondar, V.I.; Freeman, B.D.; Pinnau, I. Gas transport properties of poly(ether-b-amide) segmented block copolymers. J. Polym. Sci. B Polym. Phys. 2000, 38, 2051–2062.
   Web of Science ®Google Scholar
• Espeso, J.; Lozano, A.E.; José, G.; de Abajo, J. Effect of substituents on the permeation properties of polyamide membranes. J. Membrane Sci. 2006, 280, 659–665.
   Web of Science ®Google Scholar
• Sridhar, S.; Smitha, B.; Mayor, S.; Prathab, B.; Aminabhavi, T.M. Gas permeation properties of polyamide membrane prepared by interfacial polymerization. J. Mater. Sci. 2007, 42, 9392–9401.
   Web of Science ®Google Scholar
• Lu, X.; Bian, X.; Shi, L. Preparation and characterization of NF composite membrane. J. Membrane Sci. 2002, 210, 3–11.
   Web of Science ®Google Scholar
• Rao, A.P.; Desai, N.V.; Rangarajan, R. Interfacially synthesized thin film composite RO membranes for seawater desalination. J. Membrane Sci. 1997, 124, 263–272.
   Web of Science ®Google Scholar
• Trushinski, B.J.; Dickson, J.M.; Smyth, T.; Childs, R.F.; McCarry, B.E. Polysulfonamide thin-film composite reverse osmosis membranes. J. Membrane Sci. 1998, 143, 181–188.
   Web of Science ®Google Scholar
• Rahimpour, A.; Jahanshahi, M.; Mortazavian, N.; Madaeni, S.S.; Mansourpanah, Y. Preparation and characterization of asymmetric polyethersulfone and thin-film composite polyamide nanofiltration membranes for water softening. Appl. Surf. Sci. 2010, 256, 1657–1663.
   Web of Science ®Google Scholar
• Kurihara, M.; Fusaoka, Y.; Sasaki, T.; Bairinji, R.; Uemura, T. Development of cross-linked fully aromatic polyamide ultra-thin composite membranes for sea water desalination. Desalination 1994, 96, 133–143.
   Web of Science ®Google Scholar
• Light, W.G.; Perlman, J.L.; Riedinger, A.B.; Needham, D.F. Desalination of non-chlorinated surface sea water using TFC membrane elements. Desalination 1988, 70, 47–64.
   Web of Science ®Google Scholar
• Lesan, R.; Tomaschke, J.; Kamiyama, Y.; Shintani, T. A comparison of different classes of spiral-wound membrane elements at low concentration feeds. Ultrapure Water 1990, 7, 18.
   Google Scholar
• Singh, P.S.; Joshi, S.V.; Trivedi, J.J.; Devmurari, C.V.; Rao, A.P.; Ghosh, P.K. Probing the structural variations of thin film composite RO membranes obtained by coating polyamide over polysulfone membranes of different pore dimensions. J. Membrane Sci. 2006, 278, 19–25.
   Web of Science ®Google Scholar