References
- Amin, R. W., H. Wolff, W. Besenfelder, and R. Baxley. 1999. EWMA control charts for the smallest and largest observations. Journal of Quality Technology 31 (2):189–206. doi:https://doi.org/10.1080/00224065.1999.11979914.
- Anderson, T. W. 1984. An introduction to multivariate statistical analysis. New York: Wiley.
- Bagshaw, M., and R. A. Johnson. 1975. The effect of serial correlation on the performance of Cusum tests II. Technometrics 17 (1):73–80. doi:https://doi.org/10.2307/1268003.
- Brook, D., and D. A. Evans. 1972. An approach to the probability distribution of Cusum run length. Biometrika 59 (3):539–49. doi:https://doi.org/10.2307/2334805.
- Capizzi, G. 2015. Recent advances in process monitoring: Nonparametric and variable-selection methods for phase I and phase II (with discussion). Quality Engineering 27 (1):44–80. doi:https://doi.org/10.1080/08982112.2015.968046.
- Dietrich, B. L., E. C. Plachy, and M. F. Norton. 2014. Analytics across the enterprise. New York: IBM Press, Pearson.
- Faires, J. D., and R. Burden. 2003. Numerical methods. 3rd ed. Pacific Grove: Thomson Learning.
- Fu, M. C., and J.-Q. Hu. 1999. Efficient design and sensitivity analysis of control charts using Monte Carlo simulation. Management Science 45 (3):395–413. doi:https://doi.org/10.1287/mnsc.45.3.395.
- Fu, M. C., S. Lele, and T. W. M. Vossen. 2009. Conditional Monte Carlo gradient estimation in economic design of control limits. Production and Operations Management 18 (1):60–77. doi:https://doi.org/10.1111/j.1937-5956.2009.01005.x.
- Girshick, M., and H. Rubin. 1952. A Bayes approach to a quality control model. The Annals of Mathematical Statistics 23 (1):114–25. doi:https://doi.org/10.1214/aoms/1177729489.
- Hawkins, D. M. 1992. Evaluation of average run lengths of cumulative sum charts for an arbitrary data distribution. Communications in statistics—Simulation and computation 21 (4):1001–20. doi:https://doi.org/10.1080/03610919208813063.
- Hawkins, D. M., and D. H. Olwell. 1998. Cumulative sum charts and charting for quality improvement. New York: Springer.
- Huang, W., L. Shu, and W. Jiang. 2016. A gradient approach to the optimal design of Cusum charts under unknown mean—shift sizes. Journal of Quality Technology 48 (1):68–83. doi:https://doi.org/10.1080/00224065.2016.11918152.
- Huang, W., L. Shu, and W. Jiang. 2018. A gradient approach to efficient design and analysis of multivariate EWMA control charts. Journal of Statistical Computation and Simulation 88 (14):2707–25. doi:https://doi.org/10.1080/00949655.2018.1483367.
- Johnson, R. A., and M. Bagshaw. 1974. The effect of serial correlation on the performance of Cusum tests. Technometrics 16 (1):103–22. doi:https://doi.org/10.2307/1267498.
- Knoth, S. 2018. New results for two-sided Cusum–Shewhart control charts. In Frontiers in statistical quality control, ed. S. Knoth and W. Schmid, vol. 12, 45–63. Berlin: Springer.
- Knoth, S., and W. Schmid. 2004. Control charts for time series: A review. In Frontiers in Statistical Quality Control, ed. H.J. Lenz and P.T. Wilrich, vol. 7 210–36. Berlin: Springer.
- Lele, S. 1996. Steady state analysis of three process monitoring procedures in quality control. PhD thesis, University of Michigan.
- Lucas, J. M. 1982. Combined Shewhart-Cusum quality control schemes. Journal of Quality Technology 14 (2):51–9. doi:https://doi.org/10.1080/00224065.1982.11978790.
- Lucas, J. M., and M. S. Saccucci. 1990. Exponentially weighted moving average control schemes: Properties and enhancements. Technometrics 32 (1):1–12. doi:https://doi.org/10.1080/00401706.1990.10484583.
- Moustakides, G. V. 1986. Optimal stopping times for detecting changes in distributions. The Annals of Statistics 14 (4):1379–87. doi:https://doi.org/10.1214/aos/1176350164.
- Negandhi, V., L. Sreenivasan, R. Giffen, M. Sewak, and A. Rajasekharan. 2015. IBM predictive maintenance and quality 2.0 technical overview. Poughkeepsie: IBM Redbooks.
- Page, E. 1954. Continuous inspection schemes. Biometrika 41 (1–2):100–15.
- Philips, T., E. Yashchin, and D. Stein. 2003. Using statistical process control to monitor active managers. The Journal of Portfolio Management 30 (1):86–94. doi:https://doi.org/10.3905/jpm.2003.319922.
- Pollak, M., and A. G. Tartakovsky. 2009. Optimality properties of the Shiryaev–Roberts procedure. Statistica Sinica 19:1729–39.
- Polunchenko, A. S., and V. Raghavan. 2018. Comparative performance analysis of the cumulative sum chart and the Shiryaev–Roberts procedure for detecting changes in autocorrelated data. Applied Stochastic Models in Business and Industry 34 (6):922–48. doi:https://doi.org/10.1002/asmb.2372.
- Roberts, S. W. 1966. A comparison of some control chart procedures. Technometrics 8 (3):411–30. doi:https://doi.org/10.1080/00401706.1966.10490374.
- Saleh, N. A., M. A. Mahmoud, L. A. Jones-Farmer, I. Zwetsloot, and W. H. Woodall. 2015. Another look at the EWMA control chart with estimated parameters. Journal of Quality Technology 47 (4):363–82. doi:https://doi.org/10.1080/00224065.2015.11918140.
- Seneta, E. 1981. Non-negative matrices and Markov chains. New York: Springer Verlag.
- Shu, L., W. Huang, and W. Jiang. 2014. A novel gradient approach to optimal design and sensitivity analysis of EWMA control charts. Naval Research Logistics (NRL) 61 (3):223–37. doi:https://doi.org/10.1002/nav.21579.
- Siegmund, D. 1985. Sequential analysis. New York: Springer.
- Woodall, W. H. 1983. The distribution of the run length of one-sided Cusum procedures for continuous random variables. Technometrics 25 (3):295–300. doi:https://doi.org/10.2307/1268615.
- Woodall, W. H. 1986. The design of Cusum quality control charts. Journal of Quality Technology 18 (2):99–102. doi:https://doi.org/10.1080/00224065.1986.11978994.
- Woodall, W. H., and M. A. Mahmoud. 2005. The inertial properties of quality control charts. Technometrics 47 (4):425–36. doi:https://doi.org/10.1198/004017005000000256.
- Yashchin, E. 1985a. On the analysis and design of Cusum–Shewhart control schemes. IBM Journal of Research and Development 29 (4):377–91. doi:https://doi.org/10.1147/rd.294.0377.
- Yashchin, E. 1985b. On a unified approach to the analysis of two-sided cumulative sum schemes with headstarts. Advances in Applied Probability 17 (3):562–93. doi:https://doi.org/10.2307/1427120.
- Yashchin, E. 1986. Sensitivity analysis of Cusum–Shewhart control schemes. IBM Research Report RC 12078, Yorktown Heights, New York. Available online at http://researcher.watson.ibm.com/researcher/files/us-yashchi/Sensitivity_analysis_of_cusum_shewhart_schemes_rc_12078_OCR_1986.pdf.
- Yashchin, E. 1987. Some aspects of the theory of statistical control schemes. IBM Journal of Research and Development 31:199–205.
- Yashchin, E. 1992. Analysis of Cusum and other Markov—type control schemes by using empirical distributions. Technometrics 34 (1):54–63. doi:https://doi.org/10.2307/1269552.
- Yashchin, E. 1993. Performance of Cusum control schemes for serially correlated observations. Technometrics 35 (1):37–52. doi:https://doi.org/10.2307/1269288.
- Yashchin, E. 1995. Likelihood ratio methods for monitoring parameters of a nested random effect model. Journal of American Statistical Association 90 (430):729–38. doi:https://doi.org/10.2307/2291085.
- Yashchin, E. 2018. Statistical monitoring of multi-stage processes. In Frontiers in statistical quality control, ed. S. Knoth and W. Schmid, vol. 12, 185–209. Berlin: Springer.