Development and mechanical characterization of solvent-cast polymeric films as potential drug delivery systems to mucosal surfaces

References

• Dirim SN, Ozden HO, Bayindiril A, Esin A. (2004). Modification of water vapour transfer rate of low density polyethylene films for food packaging. J Food Eng, 63:9–13.
   Web of Science ®Google Scholar
• Sarbach C, Yagoubi N, Sauzieres J, Renaux C, Ferrier D, Postaire E. (1996). Migration of impurities from a multilayer plastics container into a parenteral infusion fluid. Int J Pharm, 140:169–74.
   Web of Science ®Google Scholar
• Banker GS. (1966). Film coating theory and practice. J Pharm Sci, 55:81–9.
   PubMed Web of Science ®Google Scholar
• Ofori-Kwakye K, Fell JT. (2003). Biphasic drug release from film coated tablets. Int J Pharm, 250:431–40.
   PubMed Web of Science ®Google Scholar
• Jimenez-Castellanos MR, Zia H, Rhodes CT. (1993). Mucoadhesive drug delivery systems. Drug Dev Ind Pharm, 19:143–94.
   Web of Science ®Google Scholar
• Ahuja A, Khar RK, Ali J. (1997). Mucoadhsive drug delivery systems. Drug Dev Ind Pharm, 23:489–515.
   Web of Science ®Google Scholar
• Lin DM, Kalachandra S, Valiyaparambil J, Offenbacher S. (2003). A polymeric device for delivery of anti-microbial and anti-fungal drugs in the oral environment: Effect of temperature and medium on the rate of drug release. Dent Mater, 19:589–96.
   PubMed Web of Science ®Google Scholar
• Perugini P, Genta I, Conti B, Modena T, Pavanetto F. (2003). Periodontal delivery of ipriflavone: New chitosan/PLGA film delivery system for a lipophilic drug. Int J Pharm, 252:1–9.
   PubMed Web of Science ®Google Scholar
• Boateng JS, Matthews KH, Stevens HNE, Eccleston GM. (2008). Wound healing dressings and drug delivery systems: A review. J Pharm Sci, 97(8):2892–923.
   PubMed Web of Science ®Google Scholar
• Schacht E, Van Den B, Delaey B, Jean-Pierre D. (2002). Medicaments based on polymers composed of methacrylamide-modified gelatin. US Patent No. 6,458,386.
   Google Scholar
• Cho CY, Lo JS. (1998). Dressing the part. Dermatol Clin, 16:25–47.
   PubMed Web of Science ®Google Scholar
• Lee JW, Park Robinson JH. (2000). Bioadhesive-based dosage forms: The next generation. J Pharm Sci, 89:850–66.
   PubMed Web of Science ®Google Scholar
• Khan AT, Peh KK, Ch'ng AS. (2000). Mechanical, bioadhesive and biological evaluations of chitosan films for wound dressing. J Pharm Pharm Sci, 3.
   PubMed Web of Science ®Google Scholar
• Wittaya-areekul S, Prahsarn C. (2006). Development and in vitro evaluation of Chitosan-polysaccharides composite wound dressings. Int J Pharm, 313:123–8.
   PubMed Web of Science ®Google Scholar
• Thomas S. (1990). Wounds and wound healing in: Wound management and dressings (Chap. 1). London: Pharmaceutical Press, 1–14.
   Google Scholar
• Morgan DA. (2002). Wounds—what should a dressing formulary include?. Hasp Pharma, 9:261–6.
   Google Scholar
• Boateng JS, Auffret AD, Humphrey MJAJ, Matthews KH, Eccleston GM, Stevens HNE. (2002a). The mechanical properties of solvent cast films. AAPS PharmSciTech, 4(4):T3186.
   Google Scholar
• Nagai T, Obara S, Kokubo H, Hoshi N. (1997). Application of hydroxypropylmethylcellulose and hydroxypropylmethylcellulose acetate succinate to aqueous film coating of pharmaceutical dosage forms. In: McGinity JW, ed. Aqueous polymeric coating for pharmaceutical dosage forms. New York: Marcel Dekker, 177–225.
   Google Scholar
• McGinity JW. (1997). Aqueous polymeric coating for pharmaceutical dosage forms. 2nd ed. New York: Marcel Deckker Inc., 79.
   Google Scholar
• Hogan JE. (1982). Aqueous versus organic solvent film coating. Int J Pharm Tech Prod Mfr, 3:17–20.
   Google Scholar
• Boateng JS, Stevens HNE, Eccleston GM, Auffret AD, Humphrey MJ. (2002b). Preparation and properties of solvent cast films. J Pharm Pharmacol, 54(Suppl. 074):S-31.
   Google Scholar
• Donhowe G, Fennema O. (1993). The effect of solution composition and drying temperature on crystallinity, permeability and mechanical properties of methylcellulose films. J Food Process Preserv, 17:231–46.
   Web of Science ®Google Scholar
• Kaya S, Kaya M. (2000). Microwave drying effect on properties of whey protein isolate edible films. J Food Eng, 43:91–6.
   Web of Science ®Google Scholar
• Stading M, Rindlav-Westling A, Gatenholm P. (2001). Humidity induced structural transitions in amylose and amylopectin films. Carbohydr Polym, 45:209–17.
   Web of Science ®Google Scholar
• Boateng JS, Auffret AD, Humphrey MJ, Matthews KH, Stevens HNE, Eccleston GM. (2003). Mechanical and dissolution properties of freeze-dried and solvent cast films. AAPS PharmSci Tech,, 5(4):s4101.
   Google Scholar
• Wittaya-areekul S, Prahsarn C, Sungthongjeen S. (2006). Development and in vitro evaluation of Chitosan-Eudragit RS 300 composite wound dressings. AAPS PharmSciTech, 7:E30.
   PubMedGoogle Scholar
• Whitcomb PJ. (1978). Rheology of xanthan gum. J Rheol, 22:493–505.
   Web of Science ®Google Scholar
• Matthews KH, Stevens HNE, Auffret AD, Humphrey MJ, Eccleston GM. (2006). Gamma-irradiation of lyophilised wound healing wafers. Int J Pharm, 313:78–86.
   PubMed Web of Science ®Google Scholar
• Matthews KH, Stevens HNE, Auffret AD, Humphrey MJ, Eccleston GM. (2008). Formulation stability and thermal analysis of lyophilised wound healing wafers containing an insoluble MMP-3 inhibitor and a non-ionic surfactant. Int J Pharm, 356:110–20.
   PubMed Web of Science ®Google Scholar
• Park CR, Munday DL. (2004). Evaluation of selected polysaccharide excipients in buccoadhesive tablets for sustained release of nicotine. Drug Dev Ind Pharm, 30:609–17.
   PubMed Web of Science ®Google Scholar
• Singh S, Jain S, Muthu MS, Tilak R. (2008). Preparation and evaluation of buccal bioadhesive tablets containing clotrimazole. Curr Drug Deliv, 5:133–41.
   PubMedGoogle Scholar
• Alvarez-Mancenido F, Landin M, Martinez-Pacheco R. (2008a). Konjac glucomannan/xanthan gum enzyme sensitive binary mixtures for colonic drug delivery. Eur J Pharm Biopharm, 69:573–81.
   PubMed Web of Science ®Google Scholar
• Alvarez-Mancenido F, Landin M, Martinez-Pacheco R. (2008b). Konjac glucomannan and konjac glucomannan/xanthan gum mixtures as excipients for controlled drug delivery systems. Diffusion of small drugs. Int J Pharm, 349:11–8.
   PubMed Web of Science ®Google Scholar
• Aulton ME. (1982). Assessment of the mechanical properties of film coating materials. Int J Pharm Tech Prod. Mfr, 3(1):9–16.
   Google Scholar
• Cansell F, Henry F, Pichot C. (1990). Study of polymer latex coalescence by dielectric measurements in the microwave domain: Influence of latex characteristics. J Appl Polym Sci, 41:547–63.
   Web of Science ®Google Scholar
• Vanderhoff JW, Bradford EB, Carrington WK. (1973). The transport of water through latex films. J Polym Sci Polym Symp, 41:155–74.
   Google Scholar
• Alcantara CR, Rumsey TR, Krochta JM. (1998). Drying rate effect on the properties of whey protein films. J Food Process Eng, 21:387–405.
   Web of Science ®Google Scholar
• Srinivasa PC, Ramesh MN, Kumar KR, Tharanathan RN. (2004). Properties of chitosan films prepared under different drying conditions. J Food Eng, 63:79–85.
   Web of Science ®Google Scholar
• Lourdin D, Coignard L, Bizot H, Colonna P. (1997). Influence of equilibrium relative humidity and plasticiser concentration on the water content and glass transition of starch materials. Polymer, 38:5401–6.
   Web of Science ®Google Scholar
• Chainey M, Wilkinson MC, Hearn J. (1985). Permeation through polymer latex film. J Appl Polym Sci, 30:4273–85.
   Web of Science ®Google Scholar
• Radebaugh GW, Murtha JL, Julian TN, Bondi JN. (1988). Method for evaluating the puncture and shear properties of pharmaceutical polymeric films. Int J Pharm, 45:39–46.
   Web of Science ®Google Scholar
• Nielsen LE. (1974). Mechanical properties of polymers and composites. New York: Reinhold.
   Google Scholar
• Young RJ, Lovell PA. (1991). Introduction to polymers. 2nd ed. London: Chapman and Hall; 356–69.
   Google Scholar
• White GW, Cakebread SH. (1966). The glassy state in certain sugarcontaining food products. J Food Technol, 1:73–82.
   Google Scholar
• Kalichevsky MT, Jaroszkiewicz EM, Ablett S, Blanshard JMV, Lillford PJ. (1992). The glass transition of amylopectin measured by DSC, DMTA and NMR. Carbohydr Polym, 18:77–88.
   Web of Science ®Google Scholar
• Selivansky D. (1989). DSC studies of thermal events at the glass transition temperature region of partially oriented polyester fibers. Thermochim Acta, 148(4):381–6.
   Web of Science ®Google Scholar
• Wunderlich B. (1981). The basis of thermal analysis. Turi EA. Thermal characterisation of polymeric materials. New York: Academic Press Inc., 91–234.
   Google Scholar
• Cocero AM, Kokini JL. (1991). The study of the glass transition of glutenin using small amplitude oscillatory rheological measurements and differential scanning calorimetry. J Rheol, 35:257–70.
   Web of Science ®Google Scholar
• Gutierrez-Rocca JC, McGinity JW. (1994). Influence of water soluble and insoluble plasticizers on the physical and mechanical properties of acrylic resin copolymers. Int J Pharm, 103:293–301.
   Web of Science ®Google Scholar
• Tarvainen M, Sutinen R, Somppi M, Paronen P, Poso A. (2001). Predicting plasticisation efficiency from three-dimensional molecular structure of a polymer plasticiser. Pharm Res, 18:1760–6.
   PubMed Web of Science ®Google Scholar
• Bodmeier R, Paeratakul O. (1994). Distribution of plasticizers between aqueous and polymer phases in aqueous colloidal dispersions. Int J Pharm, 103:47.
   Web of Science ®Google Scholar
• Shang-Yang L, Shao-Ko C, Run-Chu L. (2000). Organic esters of plasticizers affecting the water absorption, adhesive property, glass transition temperature and plasticizer performance of Eudragit acrylic films. J Control Release, 68:343–50.
   PubMed Web of Science ®Google Scholar
• Aulton ME, Abdul-Razak MH, Hogan JE. (1980). The mechanical properties of hydroxypropylmethylcellulose films derived from aqueous systems (2nd proceedings). Int Pharm Tech Conference, Paris, pp. 16–25.
   Google Scholar
• Wu C, McGinity JW. (1999). Non-traditional plasticisation of polymeric films. Int J Pharm, 177:15–27.
   PubMed Web of Science ®Google Scholar
• Amidon GL, Leesman GD. (1993). Pulsatile drug delivery system. US Patent No. 5,229,131.
   Google Scholar
• Rowe RC, Roberts RJ. (1992). The effect of some formulation variables on crack propagation in pigmented tablet film coatings using computer simulation. Int J Pharm, 86:49–58.
   Web of Science ®Google Scholar