Gel-Assisted Extrusion of Alumina

References

• W. H. Gitzen, Alumina as a Ceramic Material, The American Ceramic Society Inc., Columbus, Ohio (1970).
   Google Scholar
• P. M. Eggerstedt, J. F. Zievers and E. C. Zievers, “Choose the Right Ceramic for Filtering Hot Gases,” Chem. Engg. Prog., 1, 62–68 (1993).
   Google Scholar
• H. T. Wang, X. Q. Liu, Y. Zhou, D. K. Peng and G. Y. Meng, “Preparation and Characterization of Porous Ceramic Supports,” Memb. Sci. Tech., 17(1) 47–52 (1997).
   Google Scholar
• E. F. Adams, “Slip Cast Ceramics,” pp. 145–84 in High Temperature Oxides IV, Ed. A. M. Alper, Academic Press, New York (1981).
   Google Scholar
• M. J. Hoffmann, A. Nagel, P. Greil and G. Petzow, “Slip Casting of SiC-Whisker-Reinforced Si3N4,” J. Am. Ceram. Soc., 72(5) 765–69 (1989).
   Google Scholar
• C. L. Quackenbush, K. French and J. T. Neil,” Fabrication of Sinterable Si3N4 by Injection Molding,” Ceram. Engg. Sci. Proc., 3, 20–24 (1982).
   Google Scholar
• J. J. Benbow, E. W. Oxley and J. Bridgwater, “The Extrusion Mechanisms of Paste: The Influence of Paste Formulation on Extrusion Parameter,” Chem. Engg. Sci., 42, 2151–62 (1987).
   Web of Science ®Google Scholar
• M. J. Edirisinghe and J. R. G. Evans, “Review: Fabrication of Engineering Ceramics by Injection Molding: I Materials Selection,” Intl. J. High Tech. Ceram., 2, 1–31 (1986).
   Google Scholar
• M. J. Edirisinghe and J. R. G. Evans, “Review: Fabrication of Engineering Ceramics by Injection Molding: II Techniques,” Intl. J. High. Tech. Ceram., 2, 249–78 (1986).
   Google Scholar
• A. J. Fanelli, R. D. Silvers, W. S. Frei, J. V. Burlew and G. B. Marsh, “New Aqueous Injection Molding Process for Ceramic Powders,” J. Am. Ceram. Soc., 72, 1833–43 (1989).
   Web of Science ®Google Scholar
• M. J. Cima, M. Dudziak and J. A. Lewis, “Observation of Polyvinyl butyral)—Dibutyi Phthalate Binder Capillary Migration,” J. Am. Ceram. Soc., 72, 1087–90 (1989).
   Web of Science ®Google Scholar
• T. Zhang, S. Blackburn and J. Bridgwater, “Properties of Ceramics Suspensions for Injection Moulding Based on Agar Binder,” Brit. Ceram. Trans., 93(6) 229–33 (1994).
   Google Scholar
• J. E. Scheutz, “Methyl Cellulose Polymers as Binders for Extrusion of Ceramics,” J. Am. Ceram. Soc., 88, 1556–59 (1986).
   Google Scholar
• Y. Chen, A. Burbidge and J. Bridgwater, “Effect of Carbohydrates on the Rheological Parameters of Paste Extrusion”, J. Am. Ceram. Soc., 80(7) 1841–50 (1997).
   Google Scholar
• M. Miller and R. A. Haber, “The Use of Montmorillonite as Extrusion Aids for Alumina,” Ceram. Engg. Sci. Proc., 12, 13–48 (1991).
   Google Scholar
• M. A. Janney, “Plastic Forming of Ceramics: Extrusion and Injection Moulding,” p. 174 in Ceramics Processing, Eds. R.A. Terpstra et al.., Chapman & Hall, UK (1997).
   Google Scholar
• Bruno Kindl, D. J. Carlsson, Y. Deslandes and A. J. Hoddenbagh, “Preparation of α-Alumina Ceramics: The Use of Boehmite Sol as Dispersion Agent,” Ceram. Intl., 17, 347–50 (1991).
   Web of Science ®Google Scholar
• A.Y. Chen and J. D. Cawley, “Extrusion of α-Alumina-Boehimte Mixtures,” J. Am. Ceram. Soc., 75(3) 575–79 (1992).
   Google Scholar
• C. Sunilkumar, U. S. Hareesh, A. D. Damodaran and K. G. K. Warrier, “Monohydroxy Aluminium Oxide as a Reactive Binder for Extrusion of Alumina Ceramics,” J. Eur. Ceram. Soc., 17, 1167–72 (1997).
   Web of Science ®Google Scholar
• Hideki Okamoto, Minoru Hashiba, Yukio Nurishi and K. Hiramatsu, “Fluidity and Dispersion of Alumina Suspension at the Limit of Thickening by Ammonium Poly-acrylates,” J. Mat. Sci., 26, 383–87 (1991).
   Google Scholar
• K. S. Chou and L. J. Lee, “Effect of Dispersants on the Rheological Properties and Slip Casting of Alumina Slurry,” J. Am. Ceram. Soc., 72(9) 1622–27 (1989).
   Web of Science ®Google Scholar
• B. V. Velamakanni and F. F. Lange, “Effect of Interparticle Potentials and Sedimentation on Particle Packing Density of Bimodal Distribution during Pressure Filtration,” J. Am. Ceram. Soc., 74(1) 166–72 (1994).
   Google Scholar
• A. C. Pierre and D. R. Uhlmann, “Gelation of Aluminium Hydroxide Sols,” J. Am. Ceram. Soc., 70(1) 28–32 (1987).
   Web of Science ®Google Scholar
• L. Bergstrom, C. H. Schilling and I. A. Aksay, “Consolidation of Flocculated Alumina Suspensions,” J. Am. Ceram. Soc., 75(12) 3305–14(1992).
   Google Scholar
• C. Scott Nordahl and G. L. Messing, “Transformation and Densification of Nanocrystalline Alumina during Sinter Forging,” J. Am. Ceram. Soc., 79(12) 3149–54 (1996).
   Google Scholar
• J. Graczyk and W. Gleissle, “Rheology and Extrudability of Alumina Paste for Catalysis,” Ind. Ceram., 16(3) 199–203 (1996).
   Google Scholar