Aluminium Titanate Ceramics—A Review

References

• “Aluminium Titanate”, pp. 94–95 in The Encyclopedia of Advanced Materials, Eds. D. Block, R. J. Brook, M. C. Flemings and S. Mahajan, Pergamon Press, New York (1994).
   Google Scholar
• E. Kato, K. Daimon and J. Takahashi, “Decomposition Temperature of β-AI2TiO5,” J. Am. Ceram. Soc., 63, 355–56 (1980).
   Web of Science ®Google Scholar
• H. A. J. Thomas and R. Stevens, “Aluminium Titanate—A Literature Review, Part-I: Engineering Properties and Thermal Stability,” Brit. Ceram. Trans. & J., 88(4) 144–51 (1989).
   Google Scholar
• J. P. Day and R. J. Locker, “Thermo-Mechanical Properties of Aluminium Titanate,” p.127 in Proc. Conf. ‘Enviceram 88’ Berlin, Deutsche Keramische Gesellschaft, Germany (1989).
   Google Scholar
• M. Isnitzuka, T. Sato, T. Endo and M. Shimada, “Synthesis and Thermal Stability of Aluminium Titanate Solid Solution,” J. Am. Ceram. Soc., 70, 69–71 (1987).
   Google Scholar
• T. S. Liu and D. S. Perera, “Long Term Thermal Stability and Mechanical Properties of Aluminium Titanate at 1000°-1200°C,” J. Mater. Sci., 33, 995–1001 (1998).
   Web of Science ®Google Scholar
• D. S. Perera, R. L. Jeffries and D. C. Pender, “Compatibility of Aluminium Titanate with Non-ferrous Metals,” p. 877 in Proc. 3rd Unified Conf. on Refractories, UNITECR-93, Sao Paulo, Brazil, October 31-November 3 (1993).
   Google Scholar
• T. Hamanaka, H. Takashi, F. Hattori, “Ceramic Port Liners,” US Part 5, 260, 116, November 9 (1993).
   Google Scholar
• W. S. Li, Y. G. Li, H.R. Li, X. H. Teng, H. Lu and H. Chen, “Aluminium Titanate Ceramics and their Application In Exhaust Pipes for Engines “Intl. Symp. on Ceram. Mater. Composition, 759–62 (1994).
   Google Scholar
• D. Coors, “Application of Aluminium Titanate as Thermocouple Protection Tube in Molten Aluminium Industry,” Ceram. Trans, 52, 247–54 (1995).
   Google Scholar
• Samel, R., “Materials in Cars: Options for Change,” Mat., Tech. & Adv. Pert. Mat., 16(1) 4–7 (2001).
   Google Scholar
• H.A.J. Thomas and R. Stevens, “Aluminium Titanate—A Literature Review, Part-II: Engineering Properties and Thermal Stability,” Brit. Ceram. Trans. & J., 88(5) 184–90 (1989).
   Google Scholar
• S. Nagashima, T. Ogawa, A. Kato, “Sinterability of AI2TiO5 Powder Synthesized by Homogeneous Precipitation Technique,” J. Ceram. Soc. Jpn., 102(3) 309–11 (1994).
   Google Scholar
• I. Kotsis, T. Korim and M. Eurisz, “Comparison of Preparation Mechanism of AI2TiO5 during Various Heat Treatment Techniques,” pp. 840–43 in Euro Ceramics, Vol. V, Part 2, Trans Tech Publications, Switzerland (1997).
   Google Scholar
• K. Hamano, Y. Ohya and Z. Nakagawa, “Microstructure and Mechanical Strength of Aluminium Titanate Ceramic Prepared from Mixture of Alumina and Titania,” J. Ceram. Soc. Jpn., 91(1) 50–57 (1983).
   Google Scholar
• B. Freudenberg and A. Mocellin, “Aluminium Titanate Formation by Solid State Reaction of Coarse AI2O3 and TiO2 Powders,” J. Am. Ceram. Soc., 71, 22–28 (1988).
   Web of Science ®Google Scholar
• Y. Ohya, K. Hamano and Z. Nakagawa, “Microstructure and Mechanical Strength of Aluminium Titanate Ceramic Prepared from Synthesized Powders,” J. Ceram. Soc. Jpn., 91(1) 289–97 (1983).
   Google Scholar
• J. Y. Jeong, H. M. Lee and H. L. Lee, “Preparation of AI2O3-TiO2 Composite Powders from Alkoxides, Part 1, Preparation of AI2TiO5 by the Sol-Gel Method and the Effects of Additives,” J. Korean. Ceram. Soc., 33(10) 1138–46 (1996).
   Google Scholar
• J. Y. Jeong, H. M. Lee and H. L. Lee, “Preparation of AI2O3-TiO2 Composite Powders from Alkoxides, Part 2, Thermo-Mechanical Properties of AI2TiO5 and AI2TiO5/Mullite (alumina) Composites Prepared by the Sol-Gel Method,” J. Korean Ceram. Soc., 33(10) 1147–55 (1996).
   Google Scholar
• M. Zaharescu, D. Crisan, N. Crisan, A. Dragon, A. Jitianu and M. Predea, “AI2TiO5 Preparation Starting with Reactive Powders obtained by Sol-Gel Method,” J. Euro. Ceram. Soc., 18(9) 1257–64 (1998).
   Web of Science ®Google Scholar
• C. S. Hwang and Z. Nakagawa, “Microstructures and Mechanical Properties of TiO2 Doped Alumina Ceramics owing to Decomposition of AI2TiO5,” J. Ceram. Soc. Jpn., 102(3) 252–57 (1994).
   Google Scholar
• I. D. Alecu and R. J. Stead, “Aluminium Titanate Sintering Study aimed at Rational Design of Microstructure for Optimal Thermal Shock Characteristics,” Korean J. Ceram, 5(1) 78–81 (1999).
   Google Scholar
• C. G. Shi and I. M. Low, “Use of Spodumen for Liquid Phase Sintering of Aluminium Titanate,” Mater. Lett., 36(1/4) 118–22 (1999).
   Google Scholar
• D. M. Ibrahim and A. A. Mostafa, “MgO Stabilised Tialite Prepared by Urea Formaldehyde Polymeric Route,” Brit. Ceram. Trans., 98(4) 182–86 (1999).
   Web of Science ®Google Scholar
• M. P. Mathis, D. K. Agarwal, R. Roy, R. Plovnick and R. M. Hotcheo, “Microwave Synthesis of Aluminium Titanate in Air and Nitrogen,” Ceram. Trans., 59, 557–64 (1995).
   Google Scholar
• A. M. Sgadaes, M. M. Morelli and R. G. A. Kiminami, “Combustion Synthesis of Aluminium Titanate,” pp. 209–12 in Euro Ceramics, Vol. V, Part 1, Trans Tech Publications, Switzerland (1997).
   Google Scholar
• U. S. Hareesh, A. K. Vasudevan, P. Mukundan, A. D. Damodaran, K. G. K. Warrier, “Low Temperature Sintering of Seeded Aluminium Titanate Precursor Gels,” Mater. Lett., 32(3) 203–08 (1997).
   Google Scholar
• V. Yu. Prokof'ev, A. V. Kunin and A.P. liieiin, “Synthesis of Aluminium Titanate using Stabilising Additives,” Glass Ceramics, 56(3/4) 113–16 (1999).
   Google Scholar
• J. R. Groza, “Field Activated Sintering,” pp. 583–89 in ASM Handbook, Vol. 7: Powder Metal Technologies and Applications (1998).
   Google Scholar
• V. C. Pondolfelli, I. Nettleship and R. Stevens, “Strengthening of Aluminium Titanate by Addition of Zirconia and Zirconium Silicate,” Brit. Ceram. Proc., 42, 109–15 (1989).
   Google Scholar
• B. H. Kim and Y. H. Na, “Effect of Additives on the Microstructure and Mechanical Properties in Porous Aluminium Titanate,” Yoop Hakhoechi (Korean), 31(2) 137–46 (1994).
   Google Scholar
• D. D. Gulamova and M. K. Sarkisova, “Effect of Addition and Synthesis Method on the Characteristics of Aluminium Titanate Ceramics,” Ogneupory, 7, 18–21 (1993).
   Google Scholar
• V. Hanykar and M. Beranek, “Influence of MgO and its Method of Introduction on Stability and Properties of AI2TiO5,” Sklar Keram, 43(2) 25–30 (1993).
   Google Scholar
• D. S. Perera and R. L. Jeffries, “Final Stage Sintering of Aluminium Titanate with Hot Isostatic Pressing,” Intl. Ceram. Monogram, 1(1) 310–17 (1994).
   Google Scholar
• S. Djambazov, D. Lepkova and I. Ivanov, “Stabilization of Aluminium Titanate,” J. Mater. Sci., 29(9) 2521–25 (1994).
   Google Scholar
• M. Zhang, Y. Chen and C. Gan, “Effect of Compound Additives on the Stability of Aluminium Titanate,” Naihuo Cailiao, 33(4) 202–03 (1999).
   Google Scholar
• P. P. Demaestri, A. Giachello and P. C. Martinengo, “Influence of Some Oxides on Thermal Characteristics of Stoichiometric AI2TiO5,” pp. 57–63 in Euro Ceramics, Vol. II, Elsevier Applied Science, London and New York (1989).
   Google Scholar
• Y. Ohya, Z. Nakagawa and K. Hamano, “Crack Healing and Bending Strength of Aluminium Titanate Ceramics at High Temperatures,” J. Am. Ceram. Soc., 71, C232–33 (1988).
   Google Scholar
• P. D. D. Ferari, J.L. Dos Santos and R. H. G. A. Kiminami, “Effect of Mullite on Decomposition and Densification of Alumina,” pp. 929–34 in Proc. Unified Intl. Tech. Conf. on Refractories, UNITECR-97, 5th Biennial Worldwide Congress, “Refractories—A Worldwide Technology”, Vol. 2, New Orleans, Novermber 4–7 (1997).
   Google Scholar
• V. Buscaglia, P. Nami and M. Leoni, “Thermodynamics and Kinetics of Decomposition AI2TiO5-base Ceramics,” pp. 810–13 in Euro Ceramics, Vol. V, Part 2, Trans Tech Publications, Switzerland (1997).
   Google Scholar
• B. Freudenberg, H. A. Linder, E. Gugel and P. Thometzek, “Thermomechanical Properties of Aluminium Titanate Ceramic Between 20 and 1000°C,” pp. 264–71 in Euro Ceramics, Vol. I, Elsevier Applied Science, London and New York (1989).
   Google Scholar
• I. J. Kim, O. S. Kweon, Y. S. Ko and C. Zografou, “Effect of Grain Size on Thermomechanical Properties of AI2TiO5 Ceramics,” Korean J. Ceram., 2(4) 246–50 (1996).
   Google Scholar
• T. S. Liu and D. S. Perera, “Long Term Stability and Mechanical Properties of Aluminium Titanate at 1000°-1200°C,” J. Mat. Sci., 33(4) 995–1001 (1998).
   Google Scholar
• T. Sugiyama and H. Takashima, “Development of Aluminium Tiatanate Clay Composites for Infrared Indicator,” J. Ceram. Soc. Jpn., 105(11) 991–95 (1997).
   Google Scholar
• H. Wohlfromm, S. Moya and P. Pena, “Thermal Shock Behaviour of Aluminium Titanate Based Materials,” pp. 1003–12 in Euro Ceramics, Vol. III, Elsevier Applied Science, London and New York (1993).
   Google Scholar
• V. Fervel, B. Hansz. B. Normand and C. Coddet, “Improvement of Tribological Properties of Plasma Sprayed Ceramic Coatings Based on Alumina-Titania System,” pp. 1548–51 in Euro Ceramics, Vol. V, Part 3, Trans Tech Publications, Switzerland (1997).
   Google Scholar