References
- A. Seal, D. Chattopadhyay, A. Das Sharma, A. Sen and H. S. Maiti, “Influence of Ambient Temperature on the Rheological Properties of Alumina Tape Casting Slurry,” J. Euro. Ceram. Soc., 24, 2275–83 (2004).
- Z.-P. Xie, C.-L. Ma and Y. Huang, “Effects of Additives on Alumina Sheets Forming by a Novel Gel-Tape-Casting,” Materials & Design, 24, 287–91 (2003).
- G. Zhang, Y. Wang and J. Ma, “Bingham Plastic Fluid Flow Model for Ceramic Tape Casting,” Mater. Sci. Engg. A, 337, 274–80 (2002).
- K. Prabhakaran, A. Narayanan and C. Pavithran, “Cardanol as a Dispersant Plasticizer for an Alumina/Toluene Tape Casting Slip,” J. Euro. Ceram. Soc., 21, 2873–78 (2001).
- C. A. Gutiérrez and R. Moreno, “Influence of Slip Preparation and Casting Conditions on Aqueous Tape Casting of AI2O3,” Mater. Res. Bull., 36, 2059–72 (2001).
- F. Doreau, G. Tarì, M. Guedes, T. Chartier, C. Pagnoux and J. M. F. Ferreira, “Mechanical and Lamination Properties of Alumina Green Tapes Obtained by Aqueous Tape-Casting,” J. Euro. Ceram. Soc., 19, 2867–73 (1999).
- M. A. Piwonski and A. Roosen, “Low Pressure Lamination of Ceramic Green Tapes by Gluing at Room Temperature“, J. Euro. Ceram. Soc., 19, 263–70 (1999).
- D. J. Kim, S. Park (II) and M.-H. Lee, “Tensile Strength of Aqueous-Based Alumina Tapes Using a PVP-PVA-Gelatin Cobinder,” Ceram. Int., 31, 577–81 (2005).
- J. Ma and Z. He, “Thermal, Electrical and Mechanical Properties of Layered Substrates for Microelectronic Applications,” Thin Solid Films, 462-463, 477–80 (2004).
- M. P. Albano and L. B. Garrido, “Influence of the Slip Composition on the Properties of Tape Cast Alumina Substrates,” Ceram. Int., 31, 57–66 (2005).
- J. Kiennemann, T. Chartier, C. Pagnoux, J. F. Baumard, M. Huger and J. M. Lamérant, “Drying Mechanisms and Stress Development in Aqueous Alumina Tape Casting,” J. Euro. Ceram. Soc., 25, 1551–64 (2005).
- J. Ma, H. Wang, L. Weng and G. E. B. Tan, “Effect of Porous Interlayers on Crack Deflection in Ceramic Laminates,” J. Euro. Ceram. Soc., 24, 825–31 (2004).
- M. D. Calvert, E. S. Tormey and R. L. Pober, “Fish, Oil and Triglycerides as Dispersants for Alumina,” Am. Ceram. Soc. Bull., 65, 669–72 (1986).
- R. Moreno and G. Cordoba, “Oil Dispersion of Alumina for Tape Casting,” Am. Ceram. Soc. Bull., 74, 69–74 (1995).
- R. E. Mistier and E. R. Twiname, Tape Casting: Theory and Practice, The American Ceramic Society, Ohio, USA (2000).
- R. H. Su and D. S. Wilkinson, “Strength and Flaw Elimination Assessment in Tapecast Ceramic Laminates,” Ceram. Engg. Sci. Proc., 13, 1000–1007 (1992).
- A. Selluck and A. Wilkinson, “Strength and Toughness of Tape-Cast Yttria Stabilized Zirconia,” J. Am. Ceram. Soc., 83, 2029–35 (2000).
- M. J. O'Brien, F. M. Capaldi and B. W. Sheldon, “A Layered Alumina Composite Tested at High Temperature in Air,” J. Am. Ceram. Soc., 83, 3033–40 (2000).
- A. J. Philipps, W. J. Clegg and T. W. Clyne, “The Correlation of Interfacial and Macroscopic Toughness in SiC Laminates,” Composites, 24, 166–76 (1993).
- H. Raeder, C. Simon, T. Chartier and H. L. Toftgaard, “Tape Casting of Zirconia for Ion Conducting Membranes: A Study of Dispersants,” J. Euro. Ceram. Soc., 13, 485–91 (1994).
- M. Wu and G. L. Messing, “Fabrication of Oriented SiC Whisker-Reinforced Mullite Matrix Composites by Tape Casting,” J. Am. Ceram. Soc., 77, 2586–92 (1994).