72
Views
15
CrossRef citations to date
0
Altmetric
Articles

Effect of Porogenic Agent Type and Firing Temperatures on Properties of Low-Cost Microfiltration Membranes from Kaolin

, , , , &
Pages 1-12 | Received 03 Jun 2019, Accepted 08 Nov 2019, Published online: 18 Mar 2020

References

  • J.-H. Eom, H.-J. Yeom, Y.-W. Kim and I.-H. Song, Clays Clay Miner., 63, 222–234 (2015). doi: 10.1346/CCMN.2015.0630305
  • L. Basnayaka, N. Subasinghe and B. Albijanic, Appl. Clay Sci., 156, 45–52 (2018). doi: 10.1016/j.clay.2018.01.008
  • K. Prochaska, E. Konowal and J. Sulej-chojnacka, Colloid. Surf. B: Biointerf., 74, 238–243 (2009). doi: 10.1016/j.colsurfb.2009.07.034
  • S. Li, C. Wang and J. Zhou, Ceram. Adv. Energy Technol., 39, 8833–8839 (2013).
  • W. Misrar, M. Loutou, L. Saadi, M. Mansori, M. Waqif and C. Favotto, J. Asian Ceram. Soc., 5, 199–208 (2017). doi: 10.1016/j.jascer.2017.04.007
  • B. Shimekit, H. Mukhtar, F. Ahmad and S. Maitra, Trans. Indian Ceram. Soc., 68, 115–138 (2009). doi: 10.1080/0371750X.2009.11082166
  • S. Sarkar, Trans. Indian Ceram. Soc., 73, 239–244 (2014). doi: 10.1080/0371750X.2014.888319
  • N. Saffaj, M. Persin, S. A. Younssi, A. Albizane, M. Bouhria, H. Loukili, H. Dacha and A. Larbot, Sep. Purif. Technol., 47, 36–42 (2005). doi: 10.1016/j.seppur.2005.05.012
  • N. El Baraka, N. Saffaj, R. Mamouni, A. Laknifli, S. A. Younssi, A. Albizane and M. El Haddad, “Development and Characterization of Flat Membrane Supports Based on Moroccan Clay”, pp. 1-8 in: VII èmes Journées d’Etudes Techniques, May 2-4, Marrakesh, Morocco (2012).
  • S. Sarkar, S. Bandyopadhyay, A. Larbot and S. Cerneaux, J. Membr. Sci., 392-393, 130–136 (2012). doi: 10.1016/j.memsci.2011.12.010
  • S. K. Amin, H. A. M. Abdallah, M. H. Roushdy and S. A. El-Sherbiny, Int. J. Appl. Eng. Res., 11, 7708–7721 (2016).
  • M. Arzani, H. Reza, M. Sheikhi, T. Mohammadi and O. Bakhtiari, Appl. Clay Sci., 161, 456–463 (2018). doi: 10.1016/j.clay.2018.05.021
  • K. S. Ashaghi, M. Ebrahimi and P. Czermak, Open Environ. J., 1, 1–8 (2007). doi: 10.2174/1874233500701010001
  • I. Barrouk, S. A. Younssi, A. Kabbabi, M. Persin, A. Albizane and S. Tahiri, J. Mater. Environ. Sci., 6, 2190–2197 (2015).
  • S. B. Rekik, J. Bouaziz, A. Deratani and S. Baklouti, J. Membr. Sci. Technol., 6, 1–12 (2016). doi: 10.4172/2155-9589.1000159
  • M. B. Ali, N. Hamdi, M. A. Rodriguez, K. Mahmoudi and E. Srasra, Ceram. Int., 44, 2328–2335 (2018). doi: 10.1016/j.ceramint.2017.10.199
  • Y. Dong, B. Lin, J. Zhou, X. Zhang, Y. Ling, X. Liu, G. Meng and S. Hampshire, Mater. Charact., 62, 409–418 (2011). doi: 10.1016/j.matchar.2011.01.012
  • A. Talidi, N. Saffaj, K. E. Kacemi, S. A. Younssi, A. Albizane and A. Chakir, Sci. Stud. Res.: Chem. Eng. Biotechnol. Food Ind., 12, 263–268 (2011).
  • N. Saffaj, M. Persin, S. Alami, A. Albizane, M. Cretin and A. Larbot, Appl. Clay Sci., 31, 110–119 (2006). doi: 10.1016/j.clay.2005.07.002
  • P. B. Belibi, S. Cerneaux, M. Rivallin, M. B. Ngassoum and M. Cretin, J. Appl. Chem., 3, 1991–2003 (2014).
  • O. Qabaqous, N. Tijani, M. N. Bennani and A. El Krouk, Mater. Environ. Sci., 5, 2244–2249 (2014).
  • H. Alghamdi, A. Dakhane, A. Alum and M. Abbaszadegan, Mater. Des., 152, 10–21 (2018). doi: 10.1016/j.matdes.2018.04.060
  • B. Ghouil, A. Harabi, F. Bouzerara, B. Boudaira, A. Guechi, M. M. Demir and A. Figoli, Mater. Charact., 103, 18–27 (2015). doi: 10.1016/j.matchar.2015.03.009
  • B. Achiou, H. Elomari, M. Ouammou, A. Albizane, J. Bennazha, S. A. Younssi, I. E. El Amrani and A. Aaddane, J. Mater. Environ. Sci., 7, 196–204 (2016).
  • N. Saffaj, N. El Baraka, R. Mamouni, H. Zgou, A. Laknifli, S. A. Younssi, Y. Darmane, M. Aboulkacem and O. Mokhtari, J. Microbiol. Biotechnol. Res. Sch., 3, 1–6 (2013).
  • M. L. Sandoval, M. H. Talou, A. G. Tomba, M. A. Camerucci, E. Gregorová and W. Pabst, Ceram. Int., 44, 3893–3903 (2018). doi: 10.1016/j.ceramint.2017.11.180
  • A. Norhayati, B. M. Maisarah, A. A. Muhd, Z. Nurhanna and I. F. Ahmad, J. Teknol. Sci. Eng., 69, 117–120 (2014).
  • N. Saffaj, H. Loukili, S. A. Younssi, A. Albizane, M. Bouhria, M. Persin and A. Larbot, Desalination, 168, 301–306 (2004). doi: 10.1016/j.desal.2004.07.013
  • E. Kamseu, C. Leonelli, D. N. Boccaccini, P. Veronesi, P. Miselli, G. Pellacani and U. C. Melo, Ceram. Int., 33, 851–857 (2007). doi: 10.1016/j.ceramint.2006.01.025
  • D. Njoya, M. Hajjaji, A. Baçaoui and D. Njopwouo, Mater. Charact., 61, 289–295 (2010). doi: 10.1016/j.matchar.2009.12.009
  • O. R. Njindam, D. Njoya, J. R. Mache, M. Mouafon, A. Messan and D. Njopwouo, Constr. Build. Mater., 170, 512–519 (2018). doi: 10.1016/j.conbuildmat.2018.03.069
  • A. Njoya, C. Nkoumbou, C. Grosbois, D. Njopwouo and D. Njoya, Appl. Clay Sci., 32, 125–140 (2006). doi: 10.1016/j.clay.2005.11.005
  • C. Y. Ooi, M. Hamdi and S. Ramesh, Ceram. Int., 33, 1171–1177 (2007). doi: 10.1016/j.ceramint.2006.04.001
  • N. A. M. Barakat, M. S. Khila, A. M. Omran, F. A. Sheikh and H. Y. Kim, J. Mater. Process. Technol., 209, 3408–3415 (2009). doi: 10.1016/j.jmatprotec.2008.07.040
  • W. Khoo, F. M. Nor, H. Ardhyananta and D. Kurniawan, Proc. Manuf., 2, 196–201 (2015).
  • A. Szcze, Y. Yan, E. Chibowski, L. Holysz and M. Banach, Appl. Surf. Sci., 434, 1232–1238 (2018). doi: 10.1016/j.apsusc.2017.11.250
  • F. Mohandes, M. Salavati-niasari, M. Fathi and Z. Fereshteh, Mater. Sci. Eng. C, 45, 29–36 (2014). doi: 10.1016/j.msec.2014.08.058
  • B. H. Holder , Dissertation & Thesis in Food Science and Technology, p. 94, University of Nebraska-Lincoln, Lincoln, NE, USA (2012).
  • B. C. Huang, R. Jeng, M. Sain, B. A. Saville and M. Hubbes, Biores., 1, 257–269 (2006).
  • A. Majouli, S. A. Younssi, S. Tahiri, A. Albizane, H. Loukili and M. Belhaj, Desalination, 277, 61–66 (2011). doi: 10.1016/j.desal.2011.04.003
  • M. Mouiya, A. Abourriche, A. Bouazizi, A. Benhammou, Y. El Hafiane, Y. Abouliatim, L. Nibou, M. Oumam, M. Ouammou, A. Smith and H. Hannache, Desalination, 427, 42–50 (2018). doi: 10.1016/j.desal.2017.11.005

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.