References
- S. Sun, B. Zhao, J. Wang, Z. Wang and R. Bai, Ordna. Mat. Sci. Eng., 2, 70-72(2006).
- M. Fejdys, K. Kosla, A. Kucharska-Jastrzabek and M. Landwijt, J. Aus.. Ceram. Soc., 57, 149-161 (2021). doi: 10.1007/s41779-020-00516-7
- J. J. Swab, Int. J. App. Ceram. Tec., 1, 1-17 (2004).
- I. G. Crouch, Def. Technol., 15, 241-253 (2019). doi: 10.1016/j.dt.2019.02.002
- R. K. Lenka, P. K. Patro and T. Mahata, Handbook on Synthesis Strategies for Advanced Materials, Volume-II: Processing and Functionalization of Materials, pp. 1-54, Springer Nature, Basel, Switzerland (2022).
- W. H. Yu, W. P. Li, Y. F. Shangguan, X. Y. Ji, T. Ma and G. Q. Wu, Def. Technol., 19, 103-110 (2023). doi: 10.1016/j.dt.2021.10.003
- P. Wang, “Research on the Anti-Elastic Performance of Silicon Carbide Ceramics”, Master Thesis, Nanjing University of Science and Technology, Nanjing, China (2012).
- B. L. Lee, J. W. Song and J. E. Ward, J. Compos. Mater., 28, 1202-1226 (1994). doi: 10.1177/002199839402801302
- S. Feli, M. H. Yas and M. R. Asgari, Compos. Struct., 93, 548-556 (2011). doi: 10.1016/j.compstruct.2010.08.025
- I. Horsfall, M. R. Edwards and M. J. Hallas, Adv. Appl. Ceram., 9, 498-503 (2010). doi: 10.1179/174367610X12804792635341
- H. H. Yang, Kevlar Aramid Fiber, Chapter 5, pp.119-140, John Wiley & Sons, NY, USA (1993).
- Y. Zhu, F. Wang, Y. Wang, H. Cheng, D. Luo and Y. Zhao, Ceram. Int., 45, 15108-15115 (2019). doi: 10.1016/j.ceramint.2019.04.251
- K. K. Wu, Y. L. Chen, J. N. Yeh, W. L. Chen and C. S. Lin, Adv. Mater. Sci. Eng., 2, 1-9 (2020).
- https://nij.ojp.gov/library/publications/ballistic-resistantprotective-materials-nij-standard-010801
- https://www.ojp.gov/pdffiles1/nij/223054.pdf.
- D. Roylance, Fibre Sci. Tech., 13, 385-395 (1980). doi: 10.1016/0015-0568(80)90011-1
- http://everyspec.com/MIL-STD/MIL-STD-0500-0699/MILSTD-662F_6718
- K. Sairamentitled, G. Guo, S. Alam and L. D. Peel, Compos. Part C: Open Access (JCOMC), 2, 385-395 (2020).
- T. J. Holmquist and G. R. Johnson, J. Appl. Phys., 91, 5858-5866 (2002). doi: 10.1063/1.1468903
- ASTM E384 A, “Vickers Hardness Test Method”, A Standard Test Method for Micro Indentation Hardness of Materials, ASTM International, West Conshohocken, PA (2020).
- J. C. L. LaSalvia, S. Kirihar and S. Widjaja, “Advances in Ceramic Armor IX,” pp.1-122 in: A Collection of Papers Presented at the 37th International Conference on Advanced Ceramics and Composites, 34, Florida, USA (2013).
- S. K. García-Castillo, S. Sanchez-Saez and E. Barbero, J. Strain Anal. Eng., 47, 444-452 (2012). doi: 10.1177/0309324712454996
- A. K. Suri, C. Subramanian, J. K. Sonber and T. S. R. C. Murthy, Int. Mater. Rev., 55, 4-40 (2010). doi: 10.1179/095066009X12506721665211
- L. V. Gonzalez and R. F. Speyer, Int. J. Appl. Ceram. Tec., 7, 643-651 (2010). doi: 10.1111/j.1744-7402.2010.02501.x
- G. J. Appleby-Thomas, K. Jaansalu, A. Hameed, J. Painter, J. Shackel and J. Rowley, Def. Technol., 16, 275-282 (2020). doi: 10.1016/j.dt.2019.06.020
- I. D. Popa and F. Dobrita, Acta Univ. Cibiniensis Tech. Ser., 69, 162-166 (2017). doi: 10.1515/aucts-2017-0021
- T. Williams, “Development of Pressureless Sintered Silicon Carbide-Boron Carbide Composites for Armour Applications”, pp. 82-144, PhD Dissertation, Engineering doctorate (micro and nano materials), University of Surrey, South East of England (2016).
- D. Liu, B. B. Raju and X. L. Dang, Int. J. Impact Eng., 21, 837-854 (1998). doi: 10.1016/S0734-743X(98)00036-0