A Theoretical Investigation into the Limits of Bandwidth Enhancement with the Asymmetrical Bridged T-Coil Network

References

• P. Staric, “An analysis of the tapped coil peaking circuit for wideband/-pulse amplifiers,” Elektrotehniski Vestnik, Vol. 49, no. 2, pp. 66–79, Feb. 1982.
   Google Scholar
• P. Staric, “Three and four pole tapped coil circuits for wideband/-pulse amplifiers,” Elektrotehniski Vestnik, Vol. 50, no. 3, pp. 129–37, Mar. 1983.
   Google Scholar
• E. M. Chase, and W. Kennan, “A power distributed amplifier with constant-R network,” in Proceedings of the IEEE GaAs IC Symposium, Genelefe, FL, 1986, pp. 13–7.
   Google Scholar
• C. Hutchinson, and W. Kennan, “A low noise distributed amplifier with gain control, ” in Proceedings of the IEEE GaAs IC Symposium, Anaheim, CA, 1987, pp. 119–22.
   Google Scholar
• D. L. Feucht, Handbook of Analog Circuit Design. San Diego, CA: Academic Press, 1990.
   Google Scholar
• L. Selmi, D. B. Estreich, and B. Ricco, “Small-signal MMIC amplifier with bridged T-coil matching networks,” IEEE J. Solid State Circuits, Vol. 27, no. 7, pp. 1093–6, Jul. 1992.
   Web of Science ®Google Scholar
• J. Kim, J.-K. Kim, B.-J. Lee, M. S. Huang, H.-R. Lee, S.-H. Lee, N. Kim, D.-K. Jeong, and W. Kim, “Circuit techniques for a 40 Gb/s transmitter in 0.13 μm CMOS,” in Proceedings of the IEEE International Solid-State Circuits Conference, San Francisco, CA, 2005, pp. 150–1.
   Google Scholar
• S. Galal, and B. Razavi, “Broadband ESD protection circuits in CMOS technology,” in Proceedings of the IEEE International Solid-State Circuits Conference, San Francisco, CA, 2003, pp. 182–3.
   Google Scholar
• T. Toifl, M. Kossel, C. Menolfi, T. Morf, and M. Schmatz, “A 23 GHz differential amplifier with monolithically integrated T-coil in 0.09 μm CMOS technology,” in IEEE Microwave Theory and Techniques Society Symposium, Vol. 1, Philadelphia, PA, 2003, pp. 239–42.
   Google Scholar
• S. Galal, and B. Razavi, “10 Gb/s limiting amplifier and laser modulation driver in 0.18 μm CMOS technology,” IEEE J. Solid State Circuits, Vol. 38, pp. 2334–9, Dec. 2003.
   Web of Science ®Google Scholar
• S. Galal, and B. Razavi, “Broadband ESD protection circuits in 0.18 μm CMOS technology," IEEE J. Solid State Circuits, Vol. 38, pp. 2138–46, Dec. 2003.
   Web of Science ®Google Scholar
• S. Galal, and B. Razavi, “40 Gb/s amplifier and ESD protection circuit in 0.18 μm CMOS technology,” IEEE J. Solid State Circuits, Vol. 39, pp. 2389–96, Dec. 2004.
   Web of Science ®Google Scholar
• T. H. Lee, Planar Microwave Engineering: A Practical Guide to Theory, Measurement and Circuits. Cambridge: Cambridge University Press, 2004.
   Google Scholar
• S. Shekhar, J. S. Walling, and D. J. Allstot, “Bandwidth extension techniques for CMOS amplifiers,” IEEE J. Solid State Circuits, Vol. 41, no. 11, pp. 2414–39, Nov. 2005.
   Google Scholar
• H. Zheng, S. Z. Lou, and H. P. Leung, “RF system architectures and circuit techniques for wide-band transceiver,” in Proceedings of the IEEE International Workshop on Radio Frequency Integration Technology, Singapore, Nov.–Dec. 2005, pp. 30–7.
   Google Scholar
• J. Paramesh, and D. J. Allstot, “Analysis of the bridged T-coil circuit using the extra-element theorem',” IEEE Trans. Circuits Syst. II: Express Briefs, Vol. 53, no. 12, pp. 1408–12, Dec. 2006.
   Web of Science ®Google Scholar
• S. C. Dutta Roy, “Comments on ‘analysis of the bridged T- coil circuit using the extra element theorem’,” IEEE Trans. Circuits Syst. II:Express Briefs, Vol. 54, no. 8, pp. 673–4, Aug. 2007.
   Web of Science ®Google Scholar
• M. T. Reiha, and J. R. Long, “Symmetrical monolithic T-coils for broadband IC design,” in IEEE Microwave Theory and Techniques Society Symposium, Honolulu, HI, 2007, pp. 1909–11.
   Google Scholar
• E. Pillai, and J. Wiess, “Novel T-coil structures and implementation in a 6.4-Gb/s CMOS receiver to meet return loss specifications.” in Proceedings of the IEEE Electronic Components and Technology Conference, Reno, NV, 2007, pp. 147–53.
   Google Scholar
• D. Linton, S. Thijs, J. Borremans, M. Dehan, D. Tremouilles, M. Scholz, M. I. Natarajan, P. Wambacq, and G. Groeseneken, “T-diodes – a novel plug-and-play wideband RF circuit for ESD protection methodology,” in Proceedings of the EOS/ESD Symposium, Anaheim, CA, 2007, pp. 4A.1.1–4A.1.8.
   Google Scholar
• M. Kossel, C. Menolfi, J. Weiss, P. Buchmann, G. V. Bueren, L. Rodoni, T. Morf, T. Toifl, and M. Schmatz, “A T-coil enhanced 8.5 Gb/s high swing SST transmitter in 65 nm bulk CMOS with < -16dB return loss over 10 GHz bandwidth,” IEEE J. Solid State Circuits, Vol. 43, no. 12, pp. 2905–20, Dec. 2008.
   Web of Science ®Google Scholar
• B.-J. Huang, C.-H. Wang, C.-C. Chen, M.-F. Leei, P.-C. Huang, K.-Y. Lin, and H. Wang, “Design of amplifier for a 60 -GHz low- noise amplifier with RF ESD protection,” IEEE Trans. Microw. Theory Tech., Vol. 57, no. 2, pp. 298–305, Feb. 2009.
   Web of Science ®Google Scholar
• J. Kim, J.-K. Kim, B.-J. Lee, and D. K. Jeong, “Design optimization of on-chip inductive peaking structures for 0.13-μm CMOS 40-Gb/s transmitter circuits,” IEEE Trans. Circuits Syst. I Reg. Papers, Vol. 56, no. 12, pp. 2544–55, Dec. 2009.
   Web of Science ®Google Scholar
• S. Kim, S. Kim, G. Jung, K.-W. Kwm, and J.-H. Chun, “Design of a reliable broadband I/O employing T-coil,” J. Semicond. Technol. Sci., Vol. 9, no. 4, pp. 198–204, Dec. 2009.
   Web of Science ®Google Scholar
• S. Cao, J.-H. Chun, S. G. Beebe, and R. W. Dutton, “ESD design strategies for high-speed digital and RF circuits in deeply scaled silicon technologies,” IEEE Trans. Circuits Syst. I Reg. Papers, Vol. 57, no. 9, pp. 2301–10, Sep. 2010.
   Web of Science ®Google Scholar
• Y.-S. Lim, and J.-H. Lee, “Miniature ultra-wideband power divider using bridged T-coils,” IEEE Microw. Wirel. Comp. Lett., Vol. 22, no. 8, pp. 391–3, Aug. 2012.
   Web of Science ®Google Scholar
• Y.-S. Lim, and J.-H. Lee, “Miniature Butler matrix design using glass based passive device technology for 2.5-GHz application,” IEEE Trans. Microw. Theory Tech., Vol. 61, no. 7, pp. 2590–602, Jul. 2013.
   Google Scholar
• W.-T. Fang, T.-H. Tseng, and Y.-S. Lin, “Miniature ultra-wideband bandpass filter using bridged T-coil,” IEEE Microw. Wirel. Comp. Lett., Vol. 24, no. 6, pp. 367–9, Jun. 2014.
   Web of Science ®Google Scholar
• T.-S. Hong, J.-M. Wu, L.-Q. Yang, and S.-T. Fang, “A novel modified T-equivalent circuit for modeling LTCC embedded inductors with a large bandwidth,” in Proceedings of the IEEE Microwave Theory and Techniques Society Symposium, Phialdelphia, PA, 2003, pp. 1015–8.
   Google Scholar
• H.-Y. Lin, and J.-S. Fu, “Analysis of magnetically coupled all-pass networks for phase-shifter design,” IEEE Trans. Microw. Theory Tech., Vol. 62, no. 9, pp. 2625–37, Sep. 2014.
   Google Scholar
• T. True, “Bridged-T termination network,” U.S. Patent 3 155 927, 1964.
   Google Scholar
• F. A. Muller, “High frequency compensation of RC amplifiers,” Proc. IRE, Vol. 43, no. 8, pp. 1271–6, Aug. 1954.
   Google Scholar
• R. D. Middlebrook, “Null double injection and the extra-element theorem,” IEEE Trans. Educ., Vol. 32, no. 8, pp. 167–89, Aug. 1989.
   Web of Science ®Google Scholar
• M. E. Van Valkenburg, Introduction to Modern Network Synthesis. New York: Wiley, 1960.
   Google Scholar
• M. Abramowitz, and I. Stegun, Handbook of Mathematical Functions. New York: Dover, 1970.
   Google Scholar
• S. C. Dutta Roy, “On the solution of quartic and cubic equations,” IETE J. Educ., Vol. 47, no. 2, pp. 91–5, Apr.–Jun. 2006.
   Google Scholar