References
- F. C. G. da Silva Segundo, and A. L. P. S. Campos, “Compact frequency selective surface with dual band response for WLAN applications,” Microw. Opt. Technol. Lett., Vol. 57, pp. 265–8, 2015. doi: 10.1002/mop.28830
- L. Derek, and K. Sowerby, “Shielding strategies for interference mitigation in indoor wireless communications with frequency selective surfaces,” in Antennas and Propagation Society International Symposium, 2005 IEEE, Washington, DC, 2005 , pp. 260–3.
- R. Natarajan, M. Kanagasabai, S. Baisakhiya, R. Sivasamy, S. Palaniswamy, and J. K. Pakkathillam, “A compact frequency selective surface with stable response for WLAN applications,” IEEE Antennas Wirel. Propag. Lett., Vol. 12, pp. 718–20, 2013. doi: 10.1109/LAWP.2013.2264837
- M. Raspopoulos, F. A. Chaudhry, and S. Stavrou, “Radio propagation in frequency selective buildings,” Eur. Trans. Telecommun., Vol. 17, pp. 407–13, 2006. doi: 10.1002/ett.1127
- M. Raspopoulos, and S. Stavrou, “Frequency selective buildings through frequency selective surfaces,” IEEE Trans. Antennas Propag., Vol. 59, pp. 2998–3005, 2011. doi: 10.1109/TAP.2011.2158779
- L. Y. Seng, M. F. A. Malek, W. F. Hoon, L. W. Leong, N. Saudin, L. Mohamed, N. A. M. Affendi, and A. Binti Ali, “Frequency selective surface for enhance WLAN applications,” in 2012 IEEE Symposium on Wireless Technology and Applications (ISWTA), 2012 , pp. 81–4.
- G. H. H. Sung, K. W. Sowerby, M. J. Neve, and A. G. Williamson, “A frequency-selective wall for interference reduction in wireless indoor environments,” IEEE Antennas Propag. Mag., Vol. 48, pp. 29–37, Oct 2006. doi: 10.1109/MAP.2006.277152
- H.-H. Sung. “Frequency selective wallpaper for mitigating indoor wireless interference,” ResearchSpace@ Auckland, 2006.
- M. Yan, S. Qu, J. Wang, J. Zhang, H. Zhou, H. Chen, and L. Zheng, “A miniaturized dual-band FSS with stable resonance frequencies of 2.4 GHz/5 GHz for WLAN applications,” IEEE Antennas Wirel. Propag. Lett., Vol. 13, pp. 895–8, 2014. doi: 10.1109/LAWP.2014.2320931
- G. H.-H. Sung, K. W. Sowerby, M. J. Neve, and A. G. Williamson, “A frequency-selective wall for interference reduction in wireless indoor environments,” IEEE Antennas Propag. Mag., Vol. 48, pp. 29–37, 2006. doi: 10.1109/MAP.2006.277152
- G. H. Sung, K. Sowerby, and A. Williamson, “Modeling a low-cost frequency selective wall for wireless-friendly indoor environments,” IEEE Antennas Wirel. Propag. Lett., Vol. 5, pp. 311–4, 2006. doi: 10.1109/LAWP.2006.878899
- B. A. Munk. Frequency Selective Surfaces – Theory and Design. New York: John Wiley and Sons, 2000.
- T. K. Wu. Frequency Selective Surface and Grid Array. New York: Wiley Interscience Publication, 1995.
- J. C. Vardaxoglou. Frequency Selective Surfaces: Analysis and Design. New York: Research Studies Press, 1997.
- M. Bakir, F. Dincer, K. Delihacioglu, M. Karaaslan, and C. Sabah, “U-shaped frequency selective surfaces for single- and dual-band applications together with absorber and sensor configurations,” IET Microw. Antennas Propag., Vol. 10, pp. 293–300, 2016. doi: 10.1049/iet-map.2015.0341
- D. Ferreira, T. R. Fernandes, I. Cuiñas, and R. F. S. Caldeirinha, “Dual-band single-layer quarter ring frequency selective surface for Wi-Fi applications,” IET Microw. Antennas Propag., Vol. 10, pp. 435–41, 2016. doi: 10.1049/iet-map.2015.0641
- M. R. Tripathy, and D. Ronnow, “Dual band frequency selective surface for X-band applications,” in 2016 Progress in Electromagnetic Research Symposium (PIERS), IEEE, Shanghai, 2016 , pp. 5039–42 .
- B. Döken, and M. Kartal, “Easily optimizable dual-band frequency selective surface design,” IEEE Antennas Wirel. Propag. Lett., Vol. 16, pp. 2979–82, 2017. doi: 10.1109/LAWP.2017.2756118
- B. Doken, and M. Kartal, “Dual layer convoluted frequency selective surface design in the 2.4 and 5.8 GHz ISM bands,” Appl. Comput. Electromagn. Soc. J., Vol. 33, pp. 413–8, 2018.
- B. Döken and M. Kartal, “A new hybrid frequency selective surface design in the 2.4 and 5.8 GHz ISM bands,” in Applied Mechanics and Materials, Mahir Dursun, Ed. Istanbul: Materials Science and Engineering, 2016, pp. 9–15
- V. F. Barros, S. Segundo, A. L. P. Campos, S. G. da Silva, and A. Gomes Neto, “A novel simple convoluted geometry to design frequency selective surfaces for applications at ISM and UNII bands,” J Microw. Optoelectron. Electromagn. Appl., Vol. 16, pp. 553–63, 2017. doi: 10.1590/2179-10742017v16i2900
- F. E. Kent, B. Doken, and M. Kartal, “A new equivalent circuit based FSS design method by using genetic algorithm,” in 2nd International Conference on Engineering optimization, ENGOPT2010, Portugal, 2010 .
- R. J. Langley, and E. A. Parker, “Equivalent circuit model for arrays of square loops,” Electron. Lett., Vol. 18, pp. 294–6, 1982. doi: 10.1049/el:19820201
- C. K. Lee, and R. Langley, “Equivalent-circuit models for frequency-selective surfaces at oblique angles of incidence,” in IEE Proceedings H (Microwaves, Antennas and Propagation), 1985, pp. 395–9.
- E. Parker, “The gentleman's guide to frequency selective surfaces,” in 17th QMW Antenna Symposium, London, 1991 , pp. 1–18.
- F.-C. Huang, C.-N. Chiu, T.-L. Wu, and Y.-P. Chiou, “Very closely located dual-band frequency selective surfaces via identical resonant elements,” IEEE Antennas Wirel. Propag. Lett., Vol. 14, pp. 414–7, 2015. doi: 10.1109/LAWP.2014.2366096
- T. Liu, and S. S. Kim, “Design of wide-bandwidth electromagnetic wave absorbers using the inductance and capacitance of a square loop-frequency selective surface calculated from an equivalent circuit model,” Opt. Commun., Vol. 359, pp. 372–7, Jan 15 2016. doi: 10.1016/j.optcom.2015.10.011
- N. Marcuvitz, Waveguide Handbook. New York: IET, 1951.