Diagnosis of Multiple Rotor Bar Faults of Squirrel Cage Induction Motor (SCIM) Using Rational Dilation Wavelet Transforms

References

• A. Naha, A. K. Samanta, A. Routray, and A. K. Deb, “A method for detecting half-broken rotor bar in lightly loaded induction motors using current,” IEEE Trans. Instrum. Meas., Vol. 65, no. 7, pp. 1614–1625, 2016. doi: 10.1109/TIM.2016.2540941
   Web of Science ®Google Scholar
• P. Zhang, Y. Du, T. G. Habetler, and B. Lu, “A survey of condition monitoring and protection methods for medium-voltage induction motors,” IEEE Trans. Ind. Appl., Vol. 47, no. 1, pp. 34–46, 2011. doi: 10.1109/TIA.2010.2090839
   Web of Science ®Google Scholar
• R. Tabasian, M. Ghanbari, A. Esmaeli, and M. Jannati, “Control of three-phase induction machine drives during open-circuit fault: A review,” IETE. J. Res., 2020. doi:10.1080/03772063.2020.1724833.
   Web of Science ®Google Scholar
• Z. Hou, J. Huang, H. Liu, M. Ye, Z. Liu, and J. Yang, “Diagnosis of broken rotor bar fault in open- and closed-loop controlled wye-connected induction motors using zero-sequence voltage,” IET Electr. Power Appl., Vol. 11, no. 7, pp. 1214–1223, 2017. doi: 10.1049/iet-epa.2016.0505
   Web of Science ®Google Scholar
• Z. Hou, H. Liu, L. Zhao, J. Huang, and T. Wang, “Quantitative broken rotor bar fault detection for closed-loop controlled induction motors,” IET Electr. Power Appl., Vol. 10, no. 5, pp. 403–410, 2016. doi: 10.1049/iet-epa.2015.0440
   Web of Science ®Google Scholar
• P. C. M. Lamim Filho, R. Pederiva, and J. N. Brito, “Detection of stator winding faults in induction machines using flux and vibration analysis,” Mech. Syst. Signal Process, Vol. 42, no. 1–2, pp. 377–387, 2014. doi: 10.1016/j.ymssp.2013.08.033
   Web of Science ®Google Scholar
• T. Goktas, and M. Arkan, “Discerning broken rotor bar failure from low-frequency load torque oscillation in DTC induction motor drives,” Trans. Inst. Meas. Contr., Vol. 40, no. 1, pp. 279–286, 2018. doi: 10.1177/0142331216654964
   Web of Science ®Google Scholar
• C. Kral, F. Pirker, and G. Pascoli, “The impact of inertia on rotor faults effects theoretical aspects of the Vienna monitoring method,” IEEE Trans. Power Electron., Vol. 23, no. 4, pp. 2136–2142, 2008. doi: 10.1109/TPEL.2008.925183
   Web of Science ®Google Scholar
• H. Khelfi, and S. Hamdani, “Induction motor rotor fault diagnosis using three-phase current intersection signal,” Electr. Eng., Vol. 102, pp. 539–548, 2020. doi: 10.1007/s00202-019-00894-7
   Web of Science ®Google Scholar
• H. Khelfi, and S. Hamdani, “Temporal envelope detection by the square root of the three-phase currents for IM rotor fault diagnosis,” Electr. Eng., 2020. doi:10.1007/s00202-020-01000-y.
   Web of Science ®Google Scholar
• G. Mirzaeva, K. I. Saad, and M. G. Jahromi, “Comprehensive diagnostics of induction motor faults based on measurement of space and time dependencies of air gap flux,” IEEE Trans. Ind. Appl., Vol. 53, no. 3, pp. 2657–2666, 2017. doi: 10.1109/TIA.2016.2628718
   Web of Science ®Google Scholar
• G. Mirzaeva, and K. I. Saad, “Advanced diagnosis of stator turn-to-turn faults and static eccentricity in induction motors based on internal flux measurement,” IEEE Trans. Ind. Appl., Vol. 54, no. 4, pp. 3961–3970, 2018. doi: 10.1109/TIA.2018.2821098
   Web of Science ®Google Scholar
• V. Climente-Alarcon, A. Arkkio, and J. Antonino-Daviu, “2-D magneto mechanical transient study of a motor suffering a bar breakage,” IEEE Trans. Ind. Appl., Vol. 54, no. 3, pp. 2097–2104, 2018. doi: 10.1109/TIA.2018.2791918
   Web of Science ®Google Scholar
• D. Morinigo-Sotelo, R. D. J. Romero-Troncoso, P. A. Panagiotou, J. A. Antonino-Daviu, and K. N. Gyftakis, “Reliable detection of rotor bars breakage in induction motors via MUSIC and ZSC,” IEEE Trans. Ind. Appl., Vol. 54, no. 2, pp. 1224–1234, 2018. doi: 10.1109/TIA.2017.2764846
   Web of Science ®Google Scholar
• J. Seshadrinath, B. Singh, and B. K. Panigrahi, “Vibration analysis based interturn fault diagnosis in induction machines,” IEEE Trans. Ind. Inform., Vol. 10, no. 1, pp. 340–350, 2014. doi: 10.1109/TII.2013.2271979
   Web of Science ®Google Scholar
• L. Frosini, C. Harlisca, and L. Szabo, “Induction machine bearing fault detection by means of statistical processing of the stray flux measurement,” IEEE Trans. Ind. Electron., Vol. 62, no. 3, pp. 1846–1854, 2015. doi: 10.1109/TIE.2014.2361115
   Web of Science ®Google Scholar
• H. Berriri, M. W. Naouar, S. Member, and I. Slama-belkhodja, “Easy and fast sensor fault detection and isolation algorithm for electrical drives,” IEEE Trans. Power Electron., Vol. 27, no. 2, pp. 490–499, 2012. doi: 10.1109/TPEL.2011.2140333
   Web of Science ®Google Scholar
• S. Wang, I. W. Selesnick, G. Cai, Y. Feng, X. Sui, and X. Chen, “Nonconvex sparse regularization and convex optimization for bearing fault diagnosis,” IEEE Trans. Ind. Electron., Vol. 65, no. 9, pp. 7332–7342, 2018. doi: 10.1109/TIE.2018.2793271
   Web of Science ®Google Scholar
• J. Sun, C. Yan, and J. Wen, “Intelligent bearing fault diagnosis method combining compressed data acquisition and deep learning,” IEEE Trans. Instrum. Meas., Vol. 67, no. 1, pp. 185–195, 2017. doi: 10.1109/TIM.2017.2759418
   Web of Science ®Google Scholar
• G. Devarajan, M. Chinnusamy, and L. Kaliappan, “Detection and classification of mechanical faults of three phase induction motor via pixels analysis of thermal image and adaptive neuro-fuzzy inference system,” J. Am. Intell. Human Comput., 2020. doi:10.1007/s12652-020-01857-8.
   Web of Science ®Google Scholar
• M. Otero, S. Member, P. M. De Barrera, S. Member, G. R. Bossio, and R. Leidhold, “A strategy for broken bars diagnosis in induction motors drives,” IEEE Lat. Am. Trans., Vol. 16, no. 2, pp. 322–328, 2018. doi: 10.1109/TLA.2018.8327382
   Web of Science ®Google Scholar
• A. Naha, S. Member, A. K. Samanta, and S. Member, “Low complexity motor current signature analysis using sub-Nyquist strategy with reduced data length,” IEEE Trans. Instrum. Meas., Vol. 66, no. 12, pp. 3249–3259, 2017. doi: 10.1109/TIM.2017.2737879
   Web of Science ®Google Scholar
• L. Eren, “Bearing fault detection by one-dimensional convolutional neural networks,” Math. Probl. Eng., Vol. 2017, pp. 1–9, 2017. doi: 10.1155/2017/8617315
   Web of Science ®Google Scholar
• R. G. H. Xianghui Huang, and T. G. Habetler, “Detection of rotor eccentricity faults in a closed-loop drive-connected induction motor using an artificial neural network,” IEEE Trans. Power Electron., Vol. 22, no. 4, pp. 1552–1559, 2007. doi: 10.1109/TPEL.2007.900607
   Web of Science ®Google Scholar
• I. Harzelli, A. Menacer, and T. Ameid, “A fault monitoring approach using model-based and neural network techniques applied to input–output feedback linearization control induction motor,” J. Amb. Intell. Human Comput., Vol. 11, pp. 2519–2538, 2020. doi: 10.1007/s12652-019-01307-0
   Web of Science ®Google Scholar
• H. Zhao, J. Zheng, W. Deng, and Y. Song, “Semi-Supervised Broad Learning system based on Manifold Regularization and Broad Network,” in IEEE Trans. Circ. Syst. I Regular Pap., Vol. 67, no. 3, pp. 983–994, March 2020. doi:10.1109/TCSI.2019.2959886.
   Web of Science ®Google Scholar
• M. Soualhi, K. T. P. Nguyen, and K. Medjaher, “Pattern recognition method of fault diagnostics based on a new health indicator for smart manufacturing,” Mech. Syst. Signal. Process., Vol. 142, pp. 106680, 2020. doi:10.1016/j.ymssp.2020.106680.
   Web of Science ®Google Scholar
• A. S. Raj, and N. Murali, “Early classification of bearing faults using morphological operators and fuzzy inference,” IEEE Trans. Ind. Electron., Vol. 60, no. 2, pp. 567–574, 2013. doi: 10.1109/TIE.2012.2188259
   Web of Science ®Google Scholar
• S. Liu, Y. Sun, and L. Zhang, “A novel fault diagnosis method based on noise-assisted MEMD and functional neural fuzzy network for rolling element bearings,” IEEE. Access, Vol. 6, pp. 27048–27068, 2018. doi: 10.1109/ACCESS.2018.2833851
   Web of Science ®Google Scholar
• M. A. Mohamed, A.-A. A. Mohamed, M. Abdel-Nasser, E. E. M. Mohamed, and M. A. Moustafa Hassan, “Induction motor broken rotor bar faults diagnosis using ANFIS-based DWT,” Int. J. Model. Simul., 2020. doi:10.1080/02286203.2019.1708173.
   Google Scholar
• I. Martin-Diaz, D. Morinigo-Sotelo, O. Duque-Perez, and R. J. Romero-Troncoso, “An experimental comparative evaluation of machine learning techniques for motor fault diagnosis under various operating conditions,” IEEE Trans. Ind. Appl., Vol. 54, no. 3, pp. 2215–2224, 2018. doi: 10.1109/TIA.2018.2801863
   Web of Science ®Google Scholar
• L. Wen, X. Li, L. Gao, and Y. Zhang, “A new convolutional neural Network based data-driven fault diagnosis method,” IEEE Trans. Ind. Electron., Vol. 65, no. 7, pp. 5990–5998, 2017. doi: 10.1109/TIE.2017.2774777
   Web of Science ®Google Scholar
• R. A. Lizarraga-Morales, C. Rodriguez-Donate, E. Cabal-Yepez, M. Lopez-Ramirez, L. M. Ledesma-Carrillo, and E. R. Ferrucho-Alvarez, “Novel FPGA-based methodology for early broken rotor bar detection and classification through homogeneity estimation,” IEEE Trans. Instrum. Meas., Vol. 66, no. 7, pp. 1760–1769, 2017. doi: 10.1109/TIM.2017.2664520
   Web of Science ®Google Scholar
• T. Ince, “Real-time broken rotor bar fault detection and classification by shallow 1D convolutional neural networks,” Electr. Eng., Vol. 101, pp. 599–608, 2019. doi: 10.1007/s00202-019-00808-7
   Web of Science ®Google Scholar
• J. Wang, L. Qiao, Y. Ye, and Y. Chen, “Fractional envelope analysis for rolling element bearing weak fault feature extraction,” IEEE/CAA J. Autom. Sin., Vol. 4, no. 2, pp. 353–360, 2017. doi: 10.1109/JAS.2016.7510166
   Google Scholar
• H. Talhaoui, A. Menacer, A. Kessal, and A. Tarek, “Experimental diagnosis of broken rotor bars fault in induction machine based on Hilbert and discrete wavelet transforms,” Int. J. Adv. Manuf. Technol. Iss., Vol. 95, pp. 1399–1408, 2018. doi: 10.1007/s00170-017-1309-7
   Web of Science ®Google Scholar
• H. Zhao, H. Liu, J. Xu, and W. Deng, “Performance prediction using high-order differential mathematical morphology gradient spectrum entropy and extreme learning machine,” IEEE Trans. Instr. Meas., 2019. doi:10.1109/TIM.2019.2948414.
   Web of Science ®Google Scholar
• W. Deng, H. Liu, J. Xu, H. Zhao, and Y. Song, “An improved quantum-inspired differential evolution algorithm for deep belief network,” IEEE Trans. Instr. Meas., 2020. doi:10.1109/TIM.2020.2983233.
   Web of Science ®Google Scholar
• S. E. Pandarakone, Y. Mizuno, and H. Nakamura, “Distinct fault analysis of induction motor bearing using frequency spectrum determination and support vector machine,” IEEE Trans. Ind. Appl., Vol. 53, no. 3, pp. 3049–3056, 2017. doi: 10.1109/TIA.2016.2639453
   Web of Science ®Google Scholar
• C. Tyrén. “Sensor for non-contacting detection via modulation of electromagnetic signal through by measurement entity controlled mechanical resonance,” WO 2001073389 A1, International Patent, 2001.
   Google Scholar
• J. CusidÓCusido, L. Romeral, J. A. Ortega, J. A. Rosero, and A. G. Espinosa, “Fault detection in induction machines using power spectral density in wavelet decomposition,” IEEE Trans. Ind. Electron., Vol. 55, no. 2, pp. 633–643, 2008. doi: 10.1109/TIE.2007.911960
   Web of Science ®Google Scholar
• Madhusudhana Reddy Barusu, S. Umamaheswari, and D. Meganathan, “Non-invasive method for rotor bar fault diagnosis in three-phase squirrel cage induction motor with advanced signal processing technique,” IET J. Eng., Vol. 2019, no. 17, pp. 4415–4419, 2019.
   Google Scholar
• R. B. Randall, and J. Antoni, “Rolling element bearing diagnostics – A tutorial,” Mech. Syst. Signal. Process., Vol. 25, no. 2, pp. 485–520, 2011. doi: 10.1016/j.ymssp.2010.07.017
   Web of Science ®Google Scholar
• P. Arun, S. Abraham Lincon, and N. Prabhakaran, “Detection and characterization of bearing faults from the frequency domain features of vibration,” IETE. J. Res., Vol. 64, no. 5, pp. 634–647, 2018. doi: 10.1080/03772063.2017.1369369
   Web of Science ®Google Scholar
• M. He, and D. He, “Deep learning based approach for bearing fault diagnosis,” IEEE Trans. Ind. Appl., Vol. 53, no. 3, pp. 3057–3065, 2017. doi: 10.1109/TIA.2017.2661250
   Web of Science ®Google Scholar
• M. F. Yaqub, I. Gondal, J. Kamruzzaman, and K. A. Loparo, “Abrasion modeling of multiple-point defect dynamics for machine condition monitoring,” IEEE Trans. Reliab., Vol. 62, no. 1, pp. 171–182, 2013. doi: 10.1109/TR.2013.2241231
   Web of Science ®Google Scholar
• F. Immovilli, M. Cocconcelli, A. Bellini, and R. Rubini, “Detection of generalized-roughness bearing fault by spectral-kurtosis energy of vibration or current signals,” IEEE Trans. Ind. Electron., Vol. 56, no. 11, pp. 4710–4717, 2009. doi: 10.1109/TIE.2009.2025288
   Web of Science ®Google Scholar
• B. Li, M. Y. Chow, Y. Tipsuwan, and J. C. Hung, “Neural-network-based motor rolling bearing fault diagnosis,” IEEE Trans. Ind. Electron., Vol. 47, no. 5, pp. 1060–1069, 2000. doi: 10.1109/41.873214
   Web of Science ®Google Scholar
• T. A. Harris. Introduction to rolling bearings. Chichester: John Wiley & Sons, Inc, 1991.
   Google Scholar
• S. Electronics. “X-band microwave motion sensor module application note.”
   Google Scholar
• V. E. Thoren, “Prosthaphaeresis revisited,” Hist. Math., Vol. 15, no. 1, pp. 32–39, 1988. doi: 10.1016/0315-0860(88)90047-X
   Web of Science ®Google Scholar
• S. Faruque. Radio frequency modulation made easy. Grand Forks: Springer International Series, 2017.
   Google Scholar
• J. Martinez, A. Belahcen, and A. Muetze, “Analysis of the vibration magnitude of an induction motor with different numbers of broken bars,” IEEE Trans. Ind. Appl., Vol. 53, no. 3, pp. 2711–2720, 2017. doi: 10.1109/TIA.2017.2657478
   Web of Science ®Google Scholar
• M. O. Sonnaillon, R. Urteaga, and F. J. Bonetto, “Software PLL based on random sampling,” IEEE Trans. Instrum. Meas., Vol. 59, no. 10, pp. 2621–2629, 2010. doi: 10.1109/TIM.2009.2036459
   Web of Science ®Google Scholar
• R. G. Lyons. Understanding digital signal processing. Pears on, 2012.
   Google Scholar
• P. Wang, L. Shi, Y. Zhang, Y. Wang, and L. Han, “Broken rotor bar fault detection of induction motors using a joint algorithm of trust region and modified bare-bones particle swarm optimization,” Chin. J. Mech. Eng., Vol. 32, no. 10, 2019. doi:10.1186/s10033-019-0325-y.
   Google Scholar
• K. C. D. Kompella, V. G. R. Mannam, and S. R. Rayapudi, “DWT based bearing fault detection in induction motor using noise cancellation,” J. Electr. Syst. Inf. Technol., Vol. 3, no. 3, pp. 411–427, 2016. doi: 10.1016/j.jesit.2016.07.002
   Google Scholar
• Madhusudhana Reddy Barusu, S. Umamaheswari, and D. Meganathan, “Diagnosis of bearing outer race faults using a low-cost non-contact method with advanced wavelet transforms,” Elektron. Elektrotech., Vol. 25, no. 1, pp. 44–53, 2019. doi: 10.5755/j01.eie.25.1.22735
   Web of Science ®Google Scholar
• M. A. Moussa, M. Boucherma, and A. Khezzar, “A detection method for induction motor bar fault using sidelobes leakage phenomenon of the sliding discrete Fourier transform,” IEEE Trans. Power Electron., Vol. 32, no. 7, pp. 5560–5572, 2017. doi: 10.1109/TPEL.2016.2605821
   Web of Science ®Google Scholar
• I. I. Bayram, and I. W. Selesnick, “Frequency-domain design of overcomplete rational-dilation wavelet transforms,” IEEE Trans. Signal Process., Vol. 57, no. 8, pp. 2957–2972, 2009. doi: 10.1109/TSP.2009.2020756
   Web of Science ®Google Scholar
• I. Bayram, and I. W. Selesnick, “Overcomplete discrete wavelet transforms with rational dilation factors,” IEEE Trans. Signal Process., Vol. 57, no. 1, pp. 131–145, 2009. doi: 10.1109/TSP.2008.2007097
   Web of Science ®Google Scholar
• J. Zarei, “Induction motors bearing fault detection using pattern recognition techniques,” Expert Syst. Appl., Vol. 39, no. 1, pp. 68–73, 2012. doi: 10.1016/j.eswa.2011.06.042
   Web of Science ®Google Scholar
• Madhusudhana Reddy Barusu, and M. Deivasigamani, “Non-invasive vibration measurement for diagnosis of bearing faults in 3-phase Squirrel cage induction motor using microwave sensor,” IEEE Sens. J., 2020 doi:10.1109/JSEN.2020.3004515.
   Web of Science ®Google Scholar
• P. P. Wang, X. X. Chen, Y. Zhang, Y. J. Hu, and C. X. Miao, “IBPSO-based MUSIC algorithm for broken rotor bars fault detection of induction motors,” Chin. J. Mech. Eng., Vol. 31, no. 80, pp. 1–10, 2018.
   Google Scholar
• T. Vaimann, J. Sobra, B. Anouar, A. Rassõlkin, M. Rolak, and A. Kallaste, “Induction machine fault detection using smartphone recorded audible noise,” IET Sci. Meas. Technol., Vol. 12, no. 4, pp. 554–560, 2018. doi: 10.1049/iet-smt.2017.0104
   Web of Science ®Google Scholar
• A. Glowacz, W. Glowacz, J. Kozik, K. Piech, M. Gutten, W. Caesarendra, H. Liu, F. Brumercik, M. Irfan, and Z. Faizal Khan, “Detection of deterioration of three-phase induction motor using vibration signals,” Meas. Sci. Rev., Vol. 19, no. 6, pp. 241–249, 2019. doi: 10.2478/msr-2019-0031
   Web of Science ®Google Scholar
• W. Caesarendra, M. Pratama, B. Kosasih, T. Tjahjowidodo, and A. Glowacz, “Parsimonious network based on a fuzzy inference system (PANFIS) for time series feature prediction of low speed slew bearing prognosis,” Appl. Sci., Vol. 8, no. 12, pp. 2656, 2018. doi: 10.3390/app8122656
   Google Scholar
• A. Signal, M. Can, B. E. Used, T. O. Test, F. O. R. Structural, and F. In. “Bearing health diagnosed with a mobile phone: acoustic signal measurements can be used to test for structural faults in motors,” Vol. 24, no. 4, pp. 17–23, 2018.
   Google Scholar