Investigation of Various Commonly Associated Imperfections in Radiofrequency Micro-Electro-Mechanical System Devices and its Empirical Modeling

References

• G. Ciuti, L. Ricotti, A. Menciassi, and P. Dario, “MEMS sensor technologies for human centred applications in healthcare, physical activities, safety and environmental sensing: a review on research activities in Italy,” Sensors, Vol. 15, no. Italy, pp. 6441–6468, 2015. doi:10.3390/s150306441
   PubMedGoogle Scholar
• C. S. Morere, L. Surazynski, A. Tabernero, E. Vihriala, and T. Myllyla, “MEMS technology sensors as a more advantageous technique for measuring foot plantar pressure and balance in humans,” J. Sens. 2016. doi:10.1155/2016/6590252
   PubMed Web of Science ®Google Scholar
• https://www.eastsensor.com/blog/mems-technology-and-our-life/
   Google Scholar
• Bogue and Robert, “MEMS sensors: past present and future,” Sens. Rev., Vol. 27, pp. 7–13, 2007. doi:10.1108/02602280710729068
   Web of Science ®Google Scholar
• J. Zhu, X. Liu, Q. Shi, T. He, Z. Sun, X. Guo, W. Liu, O. B. Sulaiman, B. Dong, and C. Lee, “Development trends and perspectives of future sensors and MEMS/NEMS,” Micromachines, Vol. 11, no. 1, p. 1, 2020.
   Web of Science ®Google Scholar
• J. Seymour, F. Wu, K. Wise, et al., “State-of-the-art MEMS and microsystem tools for brain research,” Microsyst. Nanoeng, Vol. 3, p. 16066, 2017. doi:10.1038/micronano.2016.66
   PubMed Web of Science ®Google Scholar
• G. M. Rebeiz. RF MEMS Theory, Design, and Technology. Hoboken, NJ: Wiley, 2003.
   Google Scholar
• V. K. Varadhan, K. J. Vinoy, and K. A. Jose. RF MEMS and Their Applications. Chichester, West Sussex: John Wiley and Sons, Ltd., 2002.
   Google Scholar
• J. Iannacci, “RF-MEMS for high-performance and widely reconfigurable passive components – a review with focus on future telecommunications, Internet of Things (IoT) and 5G applications,” J. King Saud Univ. Sci., Vol. 29, no. 4, pp. 436–443, 2017. doi:10.1016/j.jksus.2017.06.011
   Web of Science ®Google Scholar
• A. Karmakar, and K. Singh. “Si-RF Technology.” ISBN: 978-981-13-8051-8, Springer, Singapore, 1st edition, 2019.
   Google Scholar
• www.businesswire.com
   Google Scholar
• B. Huang, and Q. Jia, “Accurate modeling of conductor rough surfaces in waveguide devices,” Electronics, Vol. 8, no. 3, p. 269, 2019. doi:10.3390/electronics8030269.
   Web of Science ®Google Scholar
• E. O. Hammerstad, and F. Bekkadal. Microstrip Handbook. Trondheim: Norwegian Institute of Technology, 1975, pp. 4–8.
   Google Scholar
• P.G. Huray, O. Oluwafemi, J. Loyer, E. Bogatin, X. Ye, “Impact of copper surface texture on loss: A model that works”, In Proceedings of the DesignCon, Santa Clara, UBM Electronics, CA, February 2010, pp. 462–483.
   Google Scholar
• P. G. Huray. The Foundations of Signal Integrity. Hoboken: John Wiley & Sons, Inc., 2009.
   Google Scholar
• P. G. Huray, S. Hall, S. Pytel, F. Oluwafemi, R. Mellitz, D. Hua, and Y. Peng, “Fundamentals of a 3-D “snowball” model for surface roughness power losses,” Signal Propag. Interconnects SPI 2007. IEEE Workshop, 121–124, 2007. doi:10.1109/SPI.2007.4512227.
   Google Scholar
• K. E. Bean, “Anisotropic etching of silicon,” IEEE Trans. Electr. Devices, Vol. 25, no. 10, pp. 1185–1193, 1978. doi:10.1109/T-ED.1978.19250
   Web of Science ®Google Scholar
• F. Marty, L. Rousseau, B. Saadany, B. Mercier, O. Français, Y. Mita, and T. Bourouina, “Advanced etching of silicon based on deep reactive ion etching for silicon high aspect ratio microstructures and three-dimensional micro- and nanostructures,” Microelectron. J., Vol. 36, no. 7, pp. 673–677, 2005. ISSN 0026-692. doi:10.1016/j.mejo.2005.04.039
   Web of Science ®Google Scholar
• E. Holtzman. Essentials of RF & Microwave Grounding. Boston, London: Artech House, 2006.
   Google Scholar
• M. E. Goldfarb, and R. A. Pucel, “Modeling via hole grounds in microstrip,” IEEE Microw. Guid. Wave Lett., Vol. 1, no. 6, pp. 135–137, 1991. doi:10.1109/75.91090
   Google Scholar
• P. Kok, and D. De Zutter, “Capacitance of a circular symmetric model of a via hole including finite ground plane thickness,” IEEE Trans. Microw. Theory Tech., Vol. 39, pp. 1229–1234, 1991. doi:10.1109/22.85393
   Web of Science ®Google Scholar
• L. Wallman, et al., “Electrochemical etch-stop technique for silicon membranes with p- and n-type regions and its application to neural sieve electrodes,” J. Micromech. Microeng., Vol. 12, no. 265, 2002. doi:10.1088/0960-1317/12/3/311
   Google Scholar
• A.V. Novak, V.R Novak. Investigation of electrochemical stop-etching process of silicon at cantilevers fabrication. Proc. Univ. Electronics, Vol. 25, no. 1, pp. 31–39, 2020. doi:10.24151/1561-5405-2020-25-1-31-39
   Google Scholar
• Z. Yapu, “Stiction and anti-stiction in MEMS and NEMS,” Acta Mech. Sin., Vol. 19, pp. 1–10, 2003. doi:10.1007/BF02487448
   Web of Science ®Google Scholar
• E.-W. Hsieh, C.-H. Tsai, and W.-C. Lin, “Anodic bonding of glass and silicon wafers with an intermediate silicon nitride film and its application to batch fabrication of SPM tip arrays,” Microelectron. J., Vol. 36, no. 7, pp. 678–682, 2005. doi:10.1016/j.mejo.2005.04.057
   Web of Science ®Google Scholar
• L. Overmeyer, Y. Wang, T. Wolfer, “Eutectic bonding.” In: The international academy for production engineering, CIRP encyclopedia of production engineering, L. Laperrière, G. Reinhart (Ed.). Berlin: . Springer, 2014.
   Google Scholar
• A. Karmakar, and K. Singh, “Planar monopole ultra wide band antenna on silicon with notched characteristics,” Int. J. Comp. Appl., 17–20, 2014.MICRO/Number 3 (ISBN: 973-93-80883-44-3).
   Google Scholar
• A. Karmakar, and K. Singh, “Full-wave analysis and characterization of RF package for MEMS applications,” Microw. Rev., Vol. 22, no. 4, pp. 17–22, 2016.
   Google Scholar
• K. Andra, “Hole plugging technology for multilayers and HDI packages,” EPC PCB Convention, 1999.
   Google Scholar
• K. Hinode, et al., “Void formation mechanism in VLSI Aluminium metallization,” IEEE Trans. Electr. Devices, Vol. 36, no. 6, pp. 1050–1055, 1989. doi:10.1109/16.24347
   Web of Science ®Google Scholar
• J.-Y. Huang, et al., “The optimization of post etches treatment for contact etches process,” in China Semiconductor technology International Conference: Shanghai, 2015, pp. 1–3.
   Google Scholar
• V. Adhikar, A. Karmakar, and C. Saha, “Systematic investigation of silicon micromachined waveguide structure & designing passive components out of it for THz application,” in 2020 URSI Regional Conference on Radio Science (URSI-RCRS), Varanasi, India, 2020, pp. 1–5.
   Google Scholar