Performance Evaluation of RSM and ANFIS in Modelling Nano Fluids-based Mixed Insulating Fluids

References

• H. R. Sheppard, “A century of progress in electrical insulation 1886–1986,” IEEE Electr. Insul. Mag., Vol. 2, no. 5, pp. 20–30, 1986. DOI: 10.1109/MEI.1986.290490.
   Google Scholar
• I. Fofana, “50 years in the development of insulating liquids,” IEEE Electr. Insul. Mag., Vol. 29, no. 5, pp. 13–25, 2013. DOI: 10.1109/MEI.2013.6585853.
   Web of Science ®Google Scholar
• I. Fofana, V. Wasserberg, H. Borsi, and E. Gockenbach, “Challenge of mixed insulating liquids for use in high-voltage transformers.1. investigation of mixed liquids,” IEEE Electr. Insul. Mag., Vol. 18, no. 3, pp. 18–31, 2002. DOI: 10.1109/MEI.2002.1014964.
   Web of Science ®Google Scholar
• D. M. Mehta, P. Kundu, A. Chowdhury, V. K. Lakhiani, and A. S. Jhala, “A review of critical evaluation of natural ester vis-a-vis mineral oil insulating liquid for use in transformers: Part II,” IEEE Trans. Dielectr. Electr. Insul., Vol. 23, no. 3, pp. 1705–12, 2016. DOI: 10.1109/TDEI.2016.005371.
   Web of Science ®Google Scholar
• R. Murugan, and R. Ramasamy, “Failure analysis of power transformer for effective maintenance planning in electric utilities,” Eng. Fail. Anal., Vol. 55, no. 9, pp. 182–192, 2015. DOI: 10.1016/j.engfailanal.2015.06.002.
   Web of Science ®Google Scholar
• M. Rafiq, et al., “Use of vegetable oils as transformer oils – a review,” Renewable Sustainable Energy Rev., Vol. 52, no. 12, pp. 308–324, 2015. DOI: 10.1016/j.rser.2015.07.032.
   Web of Science ®Google Scholar
• T. V. Oommen, et al., “A new vegetable oil based transformer fluid: Development and verification,” Proc. CEIDP Vic. Br. Columbia Can, no.1, 308–12, 2000. DOI:10.1109/CEIDP.2000.885288.
   Google Scholar
• Y. Bertrand, and L. C. Hoang. “Vegetable oils as substitute for mineral insulating oils in medium-voltage equipments,” D1-202, CIGR´E Session, p. 6, 2004.
   Google Scholar
• D. Divakaran, and C. Kalaivanan. “Investigation of lightning impulse voltage characteristics and other thermo-physical characteristics of vegetable oils for power apparatus applications,” in 2012 IEEE 10th International Conference on the Properties and Applications of Dielectric Materials, Bangalore, India, 2012, pp. 1–4.
   Google Scholar
• T. Kanoh, et al. “Analyses of electro-chemical characteristics of Palm Fatty Acid Esters as insulating oil,” in 2008 IEEE International Conference on Dielectric Liquids, Futuroscope-Chasseneuil, 2008, pp. 1–4.
   Google Scholar
• M. I. Suwarno, and Rubadi. “Effects of temperature on dielectric properties of rhicinnus oils as insulating liquid,” in 2008 International Conference on Condition Monitoring and Diagnosis, Beijing, China, 2008, pp. 286–289.
   Google Scholar
• T. Mariprasath, and V. Kirubakaran. “Pongamia pinnata as alternate liquid dielectrics in distribution transformer: A critical study on the property of viscosity,” Vol. 3, no. 1, pp. 1–7, 2015. DOI:10.13189/aep.2015.030101.
   Google Scholar
• T. Mariprasath, and V. Kirubakaran, “A critical review on the characteristics of alternating liquid dielectrics and feasibility study on pongamia pinnata oil as liquid dielectrics,” Renewable Sustainable Energy Rev., Vol. 65, no. 11, pp. 784–99, 2016. DOI: 10.1016/j.rser.2016.07.036.
   Web of Science ®Google Scholar
• P. K. Kumar, S. S. Kumar, and M. Ravindran, “Investigation on mixed insulating fluids with nano fluids and antioxidants,” International Conference on Adv. Electr. Eng. ICAEE 2014, pp. 1–4.
   Google Scholar
• S. A. Ghani, N. A. Muhamad, Z. A. Noorden, H. Zainuddin, and A. A. Ahmad, “Multi-response optimization of the properties of natural ester oil with mixed antioxidants using taguchi-based methodology,” IEEE Trans. Dielectr. Electr. Insul., Vol. 24, no. 3, pp. 1674–84, 2017. DOI: 10.1109/TDEI.2017.006589.
   Web of Science ®Google Scholar
• R. Karthik, T. S. R. Raja, S. S. Shunmugam, and T. Sudhakar, “Performance evaluation of ester Oil and mixed insulating fluids,” J. Inst. Eng. (India): Ser. B, Vol. 93, no. 3, pp. 173–8, 2012. DOI: 10.1007/s40031-012-0027-7.
   Google Scholar
• “Challenge of mixed insulating liquids for use in high-voltage transformers. II. Investigations of mixed liquid impregnated paper insulation,” IEEE Electr. Insul. Mag., Vol. 18, no. 4, pp. 5–16, 2002. DOI: 10.1109/MEI.2002.1019901.
   Web of Science ®Google Scholar
• S. Sumathi, R. Rajesh, and P. Subburaj, “Investigation of dielectric strength of transformer Oil based on hybrid TiO 2 /Al 2 O 3 /MoS 2 Nanofluid using Taguchi and response surface methodology,” IETE. J. Res., Vol. 65, no. 1, pp 1–9, 2019. DOI: 10.1080/03772063.2019.1568918.
   Web of Science ®Google Scholar
• M. S. Kumar, V. Vasu, and A. V. Gopal, “Thermal conductivity and rheological studies for Cu–Zn hybrid nanofluids with various basefluids,” J. Taiwan Inst. Chem. Eng., Vol. 66, no. c, pp. 321–327, 2016. DOI: 10.1016/j.jtice.2016.05.033.
   Web of Science ®Google Scholar
• S. K. Mechiri, V. Vasu, and A. Venu Gopal, “Investigation of thermal conductivity and rheological properties of vegetable oil based hybrid nanofluids containing Cu–Zn hybrid nanoparticles,” Exp. Heat Transf., Vol. 30, no. 3, pp. 205–17, 2017. DOI: 10.1080/08916152.2016.1233147.
   Web of Science ®Google Scholar
• A. Arami-Niya, W. M. A. Wan Daud, F. S. Mjalli, F. Abnisa, and M. S. Shafeeyan, “Production of microporous palm shell based activated carbon for methane adsorption: modeling and optimization using response surface methodology,” Chem. Eng. Res. Des., Vol. 90, no. 6, pp. 776–84, 2012. DOI: 10.1016/j.cherd.2011.10.001.
   Web of Science ®Google Scholar
• H. Niu, Y. Li, Y. Lei, L. Zhang, J. Peng, and S. Guo, “Microwave Drying of Anthracite: A Parameter optimized by response surface methodology,” Arab. J. Sci. Eng., Vol. 37, no. 1, pp. 65–73, 2012. DOI: 10.1007/s13369-011-0165-2.
   Web of Science ®Google Scholar
• K. Cruz-González, O. Torres-Lopez, A. M. García-León, E. Brillas, A. Hernández-Ramírez, and J. M. Peralta-Hernández, “Optimization of electro-Fenton/BDD process for decolorization of a model azo dye wastewater by means of response surface methodology,” Desalination, Vol. 286, no. 2, pp. 63–8, 2012. DOI: 10.1016/j.desal.2011.11.005.
   Web of Science ®Google Scholar
• S. Palani, U. Natarajan, and M. Chellamalai, “On-line prediction of micro-turning multi-response variables by machine vision system using adaptive neuro-fuzzy inference system (ANFIS),” Mach. Vis. Appl., Vol. 24, no. 1, pp. 19–32, 2013. DOI: 10.1007/s00138-011-0378-0.
   Web of Science ®Google Scholar
• J.-S. R. Jang, “ANFIS: adaptive-network-based fuzzy inference system,” IEEE Trans. Syst. Man Cybern., Vol. 23, no. 3, pp. 665–85, 1993. DOI: 10.1109/21.256541.
   Web of Science ®Google Scholar
• S. Guillaume, “Designing fuzzy inference systems from data: An interpretability-oriented review,” IEEE Trans. Fuzzy Syst., Vol. 9, no. 3, pp. 426–43, 2001. DOI: 10.1109/91.928739.
   Web of Science ®Google Scholar
• M. Omwamba, and Q. Hu, “Antioxidant capacity and antioxidative compounds in barley (Hordeum vulgare L.) grain optimized using response surface methodology in hot air roasting,” Eur. Food Res. Technol., Vol. 229, no. 6, pp. 907–14, 2009. DOI: 10.1007/s00217-009-1128-7.
   Web of Science ®Google Scholar
• A. Amiri, S. N. Kazi, M. Shanbedi, M. N. Mohd Zubir, H. Yarmand, and B. T. Chew, “Transformer oil based multi-walled carbon nanotube–hexylamine coolant with optimized electrical, thermal and rheological enhancements,” RSC Adv., Vol. 5, no. 130, pp. 107222–36, 2015. DOI: 10.1039/C5RA17687E.
   Web of Science ®Google Scholar
• J. G. Hwang, M. Zahn, F. M. O’Sullivan, L. A. A. Pettersson, O. Hjortstam, and R. Liu, “Effects of nanoparticle charging on streamer development in transformer oil-based nanofluids,” J. Appl. Phys., Vol. 107, no. 1, pp. 014310, 2010. DOI: 10.1063/1.3267474.
   Web of Science ®Google Scholar
• I. Hanafi, A. Khamlichi, F. M. Cabrera, P. J. Nuñez López, and A. Jabbouri, “Fuzzy rule based predictive model for cutting force in turning of reinforced PEEK composite,” Measurement. (Mahwah. N. J.), Vol. 45, no. 6, pp. 1424–35, 2012. DOI: 10.1016/j.measurement.2012.03.022.
   Google Scholar
• S. J. Hossain, and D. N. Ahmad, “Artificial Intelligence based surface Roughness prediction modeling for three Dimensional End Milling,” Int. J. Adv. Sci. Technol., Vol. 45, no. 8, pp. 1–18, 2012.
   Google Scholar