References
- Y. C. Leong, K. S. Ang, and C. H. Lee, “A derivation of a class of 3 port baluns from symmetrical 4 port network,” IEEE MTT-S Int. Microw. Symp. Dig. Vol. 2, pp. 1165–1168, 2002. DOI: 10.1109/MWSYM.2002.1011855
- H. R. Ahn, and S. Nam, “New design formulas for impedance transforming 3-dB Marchand baluns,” IEEE Trans. Microw. Theory Techn., Vol. 59, no. 11, pp. 2816–2823, Nov. 2011. DOI: 10.1109/TMTT.2011.2164618
- K. S. Ang, Y. C. Leong, and C. H. Lee, “Analysis and design of miniaturized lumped distributed impedance transforming baluns,” IEEE Trans. Microw. Theory Techn., Vol. 51, no. 3, pp. 1009–17, Apr. 2003. DOI: 10.1109/TMTT.2003.808677
- K. S. Ang, and I. S. Robertson, “Analysis and design of impedance transforming planar Marchand baluns,” IEEE Trans. Microw. Theory Techn., Vol. 49, no. 2, pp. 402–6, Feb. 2001. DOI: 10.1109/22.903108
- Y. Geng, W. Wang, X. Chen, L. Han, L. Li, and W. Zhang, “The study and design of a miniaturized microstrip balun With a wider bandwidth,” IEEE Antennas Wireless Propag. Lett., Vol. 15, pp. 1727–30, Feb. 2016. DOI: 10.1109/LAWP.2016.2530142
- S. A. Goncharov, and V. I. Sedinin, “Methods of design improvement of balun transformer with additional balancing lines using microstrip lines with front coupling,” in Conference on Control and Communications SIBCON, Jan. 2005.
- L. K. Yeung, and K. L. Wu, “A dual-band coupled-line balun filter,” IEEE Trans. Microw. Theory Techn., Vol. 55, no. 11, pp. 2406–11, Nov. 2007. DOI: 10.1109/TMTT.2007.907402
- X. Gao, L. K. Yeung, and K. L. Wu, “A dual-band balun using partially coupled stepped-impedance coupled-line resonators,” IEEE Trans. Microw. Theory Techn., Vol. 56, no. 6, pp. 1455–60, Jun. 2008. DOI: 10.1109/TMTT.2008.923338
- Y. W. Lin, J. C. Lu, and C. Y. Chang, “Design of high-order wideband planar balun filter in-plane bandpass prototype,” IEEE Trans. Microw. Theory Techn., Vol. 60, no. 7, pp. 2124–2130, Jul. 2012. DOI: 10.1109/TMTT.2012.2193137
- E. Y. Jung, and H. Y. Hwang, “A balun-BPF using a dual mode ring resonator,” IEEE Microw Wirel Components Lett., Vol. 17, no. 9, pp. 652–4, Sept. 2007. DOI: 10.1109/LMWC.2007.903442
- V. Govind, “Design of balun and low noise amplifier in integrated mixed signal organic substrates,” Dissertation, Georgia Institute of Technology (Jul. 2005).
- T. Zhang, and V. Subramanian, “Design and integration of compact k-band baluns using impedance tuning approach,” Prog. Electromagn. Res. C, Vol. 27, pp. 1–13, 2012. DOI: 10.2528/PIERC11120208
- R. Michaelsen, T. Johansen, K. Tamborg, and V. Zhurbenko, “A modified marchand balun configuration with tunable phase balance,” IEEE Microw Wirel Components Lett., Vol. 23, no. 2, pp. 66–8, Jan. 2013. DOI: 10.1109/LMWC.2013.2238913
- R. C. Jiang, N. W. Chen, and H. J. Tsai, “Center frequency and bandwidth controllable microstrip balun bandpass filter,” 16th International Symposium on Antenna Technology and Applied Electromagnetics. (Jul. 2014).
- H. C. Lu, and T. H. Chu, “Port reduction methods for scattering matrix measurement of an n-port network,” IEEE Trans. Microw. Theory Techn., Vol. 48, no. 6, pp. 959–68, Jun. 2000. DOI: 10.1109/22.846726
- Surface Mount Monolithic Amplifier (ERA-4XSM+). https://datasheetspdf.com/pdf/213235/Mini-Circuits/ERA-4XSM/1