A Novel Flux State-based Control Method for Improved Dynamic Performance of Induction Motor

REFERENCES

• R. Krishnan, Electric Motor Drives. Englewood Cliffs, NJ: Prentice-Hall, 2001.
   Google Scholar
• P. C. Krause, and C. H. Thomas, “Simulation of symmetrical induction machinery,” IEEE Trans. Power Appar. Syst., Vol. 84, no. 11, pp. 1038–53, Nov. 1965.
   Google Scholar
• F. Blaschke, “The principle of field orientation as applied to the new transvector closed loop control for rotating field machines,” Siemens Rev., Vol. 35, pp. 217–20, May 1972.
   Google Scholar
• D. W. Novotny, and T. A. Lipo, Vector Control and Dynamics of AC Drives. Oxford: Clarendon Press, 1996.
   Google Scholar
• I. Takahashi, and Y. Ohmori, “High-performance direct torque control of an induction motor,” IEEE Trans. Ind. Appl., Vol. 25, pp. 257–64, Mar./Apr. 1989.
   Web of Science ®Google Scholar
• M. P. Kazmierkowski, L. G. Franquelo, J. Rodriguez, M. A. Perez, and J. I. Leon, “High-performance motor drives,” IEEE Ind. Electron. Mag., Vol. 5, no. 3, pp. 6–26, Sept. 2011.
   Web of Science ®Google Scholar
• H. Mohan, S. K. Dwivedi, and M. Kumar Pathak, “Control of induction motor drives – technological advancements,” in 2018 8th IEEE India International Conference on Power Electronics (IICPE), Jaipur, India, 2018, pp. 1–8.
   Google Scholar
• G. Chang, G. Espinosa-Perez, E. Mendes, and R. Ortega, “Tuning rules for the PI gains of field-oriented controllers of induction motors,” IEEE Trans. Ind. Electron., Vol. 47, no. 3, pp. 592–602, June 2000. DOI:10.1109/41.847900.
   Web of Science ®Google Scholar
• F. Briz, M. Degner, and R. D. Lorenz, “Analysis and design of current regulators using complex vectors,” IEEE Trans. Ind. Appl., Vol. 36, no. 3, pp. 817–25, 2000.
   Web of Science ®Google Scholar
• J. W. Umland, and M. Safiuddin, “Magnitude and symmetric optimum criterion for the design of linear control systems what is it and how does it compare with the others,” IEEE Trans. Ind. Appl., Vol. 26, no. 3, pp. 489–97, 1990.
   Web of Science ®Google Scholar
• S. H. Jeon, K. K. Oh, and J. Y. Choi, “Flux observer with online tuning of stator and rotor resistances for induction motors,” IEEE Trans. Ind. Electron., Vol. 49, no. 3, pp. 653–64, June 2002.
   Web of Science ®Google Scholar
• O. Stoicuta, H. Campian, and T. Pana, “Transfer function determination for vector-controlled induction motor drives,” in Proceedings of 6th International Conference on Advanced Electromechanical Motion Systems ELECTROMOTION, 2005.
   Google Scholar
• O. Stoicuta, H. Campian, and T. Pana, “Comparative study of the stability of vector control systems with Luenberger and Kalman type estimation,” Proceedings of IEEE International Conference AQTR, Cluj-Napoca, Romania, 2006, pp. 35–41.
   Google Scholar
• O. Stoicuta, and T. Pana, “New adaptive observer for sensorless induction motor drives,” Ann. Univ. Eftimie Murgu Resita, Vol. 2, pp. 175–86, 2014.
   Google Scholar
• G. Capolino, J. A. Antonino-Daviu, and M. Riera-Guasp, “Modern diagnostics techniques for electrical machines, power electronics, and drives,” IEEE Trans. Ind. Electron., Vol. 62, no. 3, pp. 1738–45, March 2015.
   Web of Science ®Google Scholar
• S. M. A. Cruz, A. J. M. Cardoso, and H. A. Toliyat, “Diagnosis of stator, rotor and air gap eccentricity faults in three-phase induction motors based on the multiple reference frames theory,” in 38th IAS Annual Meeting on Conference Record of the Industry Applications Conference, Vol. 2, Salt Lake City, UT, USA, 2003, pp. 1340–6.
   Google Scholar
• S. Drid, M.-S. Nait-Said, and M. Tadjine, “The doubly Fed induction machine modeling in the separate reference frames,” J. Elect. Eng. (JEE), Vol. 4, no. 1, pp. 11–6, 2004.
   Google Scholar
• S. M. A. Cruz, and A. J. M. Cardoso, “Multiple reference frames theory: a new method for the diagnosis of stator faults in three-phase induction motors,” IEEE Trans. Energy Convers., Vol. 20, no. 3, pp. 611–9, Sept. 2005.
   Web of Science ®Google Scholar
• K. S. Gaeid, H. W. Ping, and H. A. F. Mohamed, “Simulink representation of induction motor reference frames,” in 2009 International Conference for Technical Postgraduates (TECHPOS), Kuala Lumpur, 2009, pp. 1–4.
   Google Scholar
• J. Sadoughi, R. Ghandehari, and P. Amiri, “Comparison and simulation of rotor flux estimators in stationary and rotating reference frame in the vector control of induction motors for low-speed applications,” in 4th Annual International Power Electronics, Drive Systems and Technologies Conference, Tehran, 2013, pp. 31–7.
   Google Scholar
• S. Umashankar, A. Mathew, P. Sujyothi, V. G. Nithya, and T. S. Sreedevi, “Investigation on steady state and transient behaviour of induction machine model under various reference frames,” in 2014 International Conference on Advances in Electrical Engineering (ICAEE), Vellore, 2014, pp. 1–6.
   Google Scholar
• Y. Liu, and A. M. Bazzi, “A general analytical three-phase induction machine core loss model in the arbitrary reference frame,” IEEE Trans. Ind. Appl., Vol. 53, no. 5, pp. 4210–20, Sept.–Oct. 2017.
   Web of Science ®Google Scholar
• Q. Fu, S. Yue, B. He, and N. Fu, “Multiple coupled circuit modelling approach for squirrel cage induction machine under single-broken-bar fault with stator winding functions decomposed in d–q rotor reference frame,” IET Electr. Power Appl., Vol. 13, no. 7, pp. 889–900, 7 2019.
   Web of Science ®Google Scholar
• X. Zhou, J. Sun, H. Li, and X. Song, “High performance three-phase PMSM open-phase fault-tolerant method based on reference frame transformation,” IEEE Trans. Ind. Electron., Vol. 66, no. 10, pp. 7571–80, Oct. 2019.
   Web of Science ®Google Scholar
• J. A. Ramirez-Nunez, J. A. Antonino-Daviu, V. Climente-Alarcón, A. Quijano-López, H. Razik, R. A. Osornio-Rios, and R. D. J. Romero-Troncoso, “Evaluation of the detectability of electromechanical faults in induction motors via transient analysis of the stray flux,” IEEE Trans. Ind. Appl., Vol. 54, no. 5, pp. 4324–32, Sept.–Oct. 2018.
   Web of Science ®Google Scholar
• J. Antonino-Daviu, I. Zamudio-Ramírez, R. A. Osornio-Ríos, V. Fuster-Roig, R. de Jesús Romero-Troncoso, and L. D. Dunai, “Stray flux analysis for the detection of rotor failures in wound rotor induction motors,” in IECON 2019 – 45th Annual Conference of the IEEE Industrial Electronics Society, Lisbon, Portugal, 2019, pp. 3704–9.
   Google Scholar
• I. Zamudio-Ramirez, J. A. Antonino-Daviu, R. A. Osornio-Rios, R. de Jesus Romero-Troncoso, and H. Razik, “Detection of winding asymmetries in wound-rotor induction motors via transient analysis of the external magnetic field,” IEEE Trans. Ind. Electron., Vol. 67, no. 6, pp. 5050–9, June 2020.
   Web of Science ®Google Scholar
• R. M. Prasad, and M. A. Mulla, “Mathematical modeling and position-sensorless algorithm for stator-side field-oriented control of rotor-tied DFIG in rotor flux reference frame,” IEEE Trans. Energy Convers., Vol. 35, no. 2, pp. 631–9, June 2020.
   Web of Science ®Google Scholar
• R. N. Mishra, and K. B. Mohanty, “Design and implementation of a feedback linearization controlled IM drive via simplified neuro-fuzzy approach,” IETE. J. Res., Vol. 64, no. 2, pp. 209–30, 2018.
   Web of Science ®Google Scholar
• P. Swarnkar, S. K. Jain, and R. K. Nema, “Adaptive control schemes for improving the control system dynamics: a review,” IETE Tech. Rev, Vol. 31, no. 1, pp. 17–33, Jan./Feb. 2014.
   Web of Science ®Google Scholar
• M. H. Sabzalian, and A. Mohammadzadeh, “A new robust control for induction motors,” IETE. J. Res., 2019. DOI:10.1080/03772063.2019.1643265.
   Web of Science ®Google Scholar
• A. Dendouga, “A comparative study between the PI and SM controllers used by nonlinear control of induction motor fed by SVM matrix converter,” IETE. J. Res. 2020. DOI:10.1080/03772063.2020.1743781.
   Web of Science ®Google Scholar
• T. Pana, and O. Stoicuta, “Controllers tuning for the speed vector control of induction motor drive systems,” in 2010 IEEE International Conference on Automation, Quality and Testing, Robotics (AQTR), Cluj-Napoca, 2010, pp. 1–6. DOI:10.1109/AQTR.2010.5520908.
   Google Scholar