PV-based Grid Interactive PMBLDC Electric Vehicle with High Gain Interleaved DC-DC SEPIC Converter

REFERENCES

• A. Tashakori, and M. Ektesabi, “Direct torque control of in-wheel BLDC motor used in electric vehicle,” IAENG Trans. Eng. Tech., Springer, Vol. 229, pp. 273–86, 2013. DOI:10.1007/978-94-007-6190-2_21.
   Google Scholar
• W. Shujuan, and J. Fangyi, “Analysis of photovoltaic parity from the cost of electricity,” Sol. Energy, Vol. 37, pp. 9–16, August 2016.
   Google Scholar
• X. J. Shen, Y. Zhang, S. Chen, Y. C. Zhang, and Y. T. Yao, “Application options for grid-connected photovoltaic generation system in URT power system,” in Proc. IET Conf. Renewable Power Gen. RPG 2011, Edinburgh, UK, 6–8 Sept. 2011, pp. 1–4.
   Google Scholar
• M. A. G. de Brito, L. Galotto, and L. P. Sampaio, “Evaluation of the main MPPT techniques for photovoltaic applications,” IEEE Trans. Ind. Electron, Vol. 60, no. 3, pp. 1156–67, 2013. DOI:10.1109/TIE.2012.2198036.
   Web of Science ®Google Scholar
• D. Debnath, P. De, and K. Chatterjee, “Simple scheme to extract maximum power from series connected photovoltaic modules experiencing mismatched operating conditions,” IET Power Electron., Vol. 9, no. 3, pp. 408–16, 2016. DOI:10.1049/iet-pel.2015.0068.
   Web of Science ®Google Scholar
• V. Monteiro, J. G. Pinto, and J. L. Afonso, “Experimental validation of a three port integrated topology to interface electric vehicles and renewable with the electrical grid,” IEEE Trans. Ind Info, Vol. 14, no. 6, pp. 2364–74, 2018. DOI:10.1109/TII.2018.2818174.
   Web of Science ®Google Scholar
• K. Sarita, S. Kumar, A. S. S. Vardhan, R. M. Elavarasan, R. K. Saket, G. M. Shafiullah, and E. Hossain, “Power enhancement with grid stabilization of renewable energy-based generation system using UPQC-FLC-EVA technique,” IEEE. Access., Vol. 8, pp. 207443–64, 2020. DOI:10.1109/ACCESS.2020.3038313.
   Web of Science ®Google Scholar
• N. Saxena, I. Hussain, B. Singh, and A. L. Vyas, “Implementation of a grid-integrated PV-battery system for residential and electrical vehicle applications,” IEEE Trans. Ind. Electron., Vol. 65, no. 8, pp. 6592–601, 2017. DOI:10.1109/TIE.2017.2739712.
   Web of Science ®Google Scholar
• A. Tashakori, and M. Ektesabi, “A simple fault tolerant control system for Hall Effect sensors failure of BLDC motor,” IEEE Conf. Ind. Electron. Apps (ICIEA 2013), 1011–6, June 2013.
   Google Scholar
• A. Verma, and B. Singh, “Multimode operation of Solar PV array, grid, battery and diesel generator set based EV charging station,” IEEE Trans. Ind. Appl., Vol. 56, no. 5, pp. 5330–9, 2020. DOI:10.1109/TIA.2020.3001268.
   Web of Science ®Google Scholar
• J. Saeed, M. Niakinezhad, L. Wang, and N. Fetnando, “An integrated charger with hybrid power source using PV array for EV application,” in 2019 IEEE 13th International Conference on Compatibility, Power Electronics and Power Engineering (CPE-POWERENG), 2019, April, pp. 1–6. IEEE.
   Google Scholar
• S. Shukla, A. Al-Durra, T. H. El-Fouly, and E. F. El-Saadany, “Bidirectional power flow control of Solar PV array based multifunctional E-mobility charger,” in 2020 2nd International Conference on Smart Power & Internet Energy Systems (SPIES), 2020, September, pp. 391–6. IEEE.
   Google Scholar
• S. Sashidhar, V. G. P. Reddy, and B. G. Fernandes, “A single-stage sensorless control of a PV-based bore-well submersible BLDC motor,” IEEE. J. Emerg. Sel. Top. Power. Electron., Vol. 7, no. 2, pp. 1173–80, 2018. DOI:10.1109/JESTPE.2018.2810506.
   Web of Science ®Google Scholar
• N. R. Raipure, R. T. Ugale, and B. N. Chaudhari, “Solar powered BLDC motor drive for wide speed range electric vehicle application,” in IEEE Inter Conf Power Electron., Drives and Energy Systems. IEEE; 2018.
   Google Scholar
• M. A. Rahman, and M. A. Hoque, “On-line self-tuning Ann-based speed control of a PM DC motor,” IEEE Trans. Mechatron, Vol. 2, no. 3, pp. 169–77, 1997. DOI:10.1109/3516.622969.
   Web of Science ®Google Scholar
• R. Shanmugasundram, K. M. Zakariah, and N. Yadaiah, “Effect of parameter variations on the performance of direct current (DC) servomotor drives,” J. Vib. Control, Vol. 19, no. 10, pp. 1575–86, 2013. DOI:10.1177/10775463124-48080.
   Web of Science ®Google Scholar
• Y. W. Tu, and M. T. Ho, “Robust second-order controller synthesis for model matching of interval plants and its application to servo motor control,” IEEE Trans. Control Sys and Tech, Vol. 20, no. 2, pp. 530–7, 2012. DOI:10.1109/TCST.2011.2118758.
   Web of Science ®Google Scholar
• R. Shanmugasundram, K. M. Zakariah, and N. Yadaiah, “Implementation and performance analysis of digital controllers for brushless DC motor drives,” IEEE Trans. Mechatron, Vol. 19, no. 1, pp. 213–24, 2014. DOI:10.1109/TMECH.2012.2226469.
   Web of Science ®Google Scholar
• P. Pillay, and R. Krishnan, “Modeling, simulation, and analysis of permanent-magnet motor drives, Part ii: The brushless DC motor drive,” IEEE Trans. Ind. Appl, Vol. 25, no. 2, pp. 274–9, 1989. DOI:10.1109/28.25542.
   Web of Science ®Google Scholar
• A. Rubaai, D. Ricketts, and M. D. Kankam, “Laboratory implementation of a microprocessor-based fuzzy logic tracking controller for motion controls and drives,” IEEE Trans. Ind. Appl, Vol. 38, no. 2, pp. 448–56, 2002. DOI:10.1109/28.993166.
   Web of Science ®Google Scholar
• J.-W. Kim, and S. W. Kim, “Design of incremental fuzzy PI controllers for a gas-turbine plant,” IEEE Trans. Mechatron, Vol. 8, no. 3, pp. 410–4, Sep. 2003. DOI:10.1109/TMECH.2003.816858.
   Web of Science ®Google Scholar
• D. X. Ba, H. Yeom, J. Kim, and J. Bae, “Gain-adaptive robust backstepping position control of a BLDC motor system,” IEEE/ASME Trans. Mechatron., Vol. 23, no. 5, pp. 2470–81, 2018. DOI:10.1109/TMECH.2018.2864187.
   Web of Science ®Google Scholar
• A. Rubaai, and P. Young, “Hardware/software implementation of fuzzy-neural-network self-learning control methods for brushless DC motor drives,” IEEE Trans. Ind. Appl., Vol. 52, no. 1, pp. 414–24, 2015. doi:10.1109/TIA.2015.2468191.
   Web of Science ®Google Scholar
• B. Singh, B. N. Singh, A. Chandra, K. Al-Haddad, A. Pandey, and D. P. Kothari, “A review of single-phase improved power quality ac-dc converters,” IEEE Trans. Ind. Electron, Vol. 50, no. 5, pp. 962–81, Oct. 2003. DOI:10.1109/TIE.2003.817609.
   Web of Science ®Google Scholar
• J. S. Lawler, J. M. Bailey, J. W. McKeever, and J. Pinto, “Limitations of the conventional phase advance method for constant power operation of the brushless DC motor,” in Proceedings IEEE Southeast Conference, IEEE; Apr. 2002,pp. 174–80.
   Google Scholar
• Y. Lee, and J. Kim, “Analysis of the three-phase inverter power efficiency of a BLDC motor drive using conventional six-step and inverted pulse width modulation driving schemes,” Can. J. Electr. Comput. Eng., Vol. 42, no. 1, pp. 34–40, 2019.
   Google Scholar
• F. Naseri, E. Farjah, E. Schaltz, K. Lu, and N. Tashakor, “Predictive control of Low-cost three-phase four-switch inverter-fed drives for brushless DC motor applications,” IEEE Trans. Circuits Syst. Regul. Pap., Vol. 68, no. 3, pp. 1308–18, 2020. doi:10.1109/TCSI.2020.3043468
   Web of Science ®Google Scholar
• Y. Lee, and J. Kim, “Analysis of the three-phase inverter power efficiency of a BLDC motor drive using conventional six-step and inverted pulse width modulation driving schemes,” Can. J. Electr. Comput. Eng., Vol. 42, no. 1, pp. 34–40, 2019. DOI:10.1109/CJECE.2018.2885351.
   Google Scholar
• P. Prabhakaran, and V. Agarwal, “Novel boost-SEPIC type interleaved DC–DC converter for mitigation of voltage imbalance in a low-voltage bipolar DC microgrid,” in IEEE Trans. Ind. Electron, Vol. 67, no. 8, pp. 6494–504, Aug. 2020. DOI:10.1109/TIE.2019.2939991.
   Web of Science ®Google Scholar
• L. Zhang, and S. Chakraborty, “An interleaved series-capacitor tapped Buck converter for high step-down DC/DC application,” in IEEE Trans Power Electron, Vol. 34, no. 7, pp. 6565–74, July 2019. DOI:10.1109/TPEL.2018.2877309.
   Web of Science ®Google Scholar
• M. L. Alghaythi, R. M. O’Connell, N. E. Islam, M. M. S. Khan, and J. M. Guerrero, “A high step-up interleaved DC-DC converter with voltage multiplier and coupled inductors for renewable energy systems,” in IEEE Access, Vol. 8, pp. 123165–74, 2020. DOI:10.1109/ACCESS.2020.3007137.
   Web of Science ®Google Scholar
• P. C. Heris, Z. Saadatizadeh, and E. Babaei, “A new two input-single output high voltage gain converter with ripple-free input currents and reduced voltage on semiconductors,” in IEEE Trans Power Electron, Vol. 34, no. 8, pp. 7693–702, Aug. 2019. DOI:10.1109/TPEL.2018.2880-493.
   Web of Science ®Google Scholar
• Z. Saadatizadeh, P. C. Heris, M. Sabahi, and E. Babaei, “A DC–DC transformerless high voltage gain converter with low voltage stresses on switches and diodes,” in IEEE Trans. Power Electron, Vol. 34, no. 11, pp. 10600–9, Nov. 2019. DOI:10.1109/TPEL.2019.2900212.
   Web of Science ®Google Scholar
• T. R. Granados-Luna, et al., “Two-Phase, dual interleaved buck–boost DC–DC Converter for automotive applications,” in IEEE Trans. Ind. Appl, Vol. 56, no. 1, pp. 390–402, Jan.–Feb. 2020. DOI:10.1109/TIA.2019.2942026.
   Web of Science ®Google Scholar