Experimental Validation of Torque Ripple Reduction in MMC-Fed BLDC Motor Using the Proposed Phase Modulated Model Predictive Control

References

• J. Shao, “An improved microcontroller-based sensorless brushless DC (BLDC) motor drive for automotive applications,” IEEE Trans. Ind. Appl., Vol. 42, no. 5, pp. 1216–21, Sept.-Oct. 2006. DOI:10.1109/TIA.2006.880888.
   Web of Science ®Google Scholar
• S. Sakunthala, R. Kiranmayi, and P. N. Mandadi, “A study on industrial motor drives: comparison and applications of PMSM and BLDC motor drives,” in 2017 International Conference on Energy, Communication, Data Analytics and Soft Computing (ICECDS), Chennai, India, 2017, pp. 537–40, DOI:10.1109/ICECDS.2017.8390224.
   Google Scholar
• C. Cui, G. Liu, and K. Wang, “A novel drive method for high-speed brushless DC motor operating in a wide range,” IEEE Trans. Power Electron., Vol. 30, no. 9, pp. 4998–5008, Sept. 2015. DOI:10.1109/TPEL.2014.2361752.
   Web of Science ®Google Scholar
• H. Kim, J. Park, and J. Hur, “Comparison analysis of demagnetization and torque ripple in accordance with freewheeling current in PM BLDC motor,” IEEE Trans. Magn., Vol. 51, no. 11, pp. 1–4, Nov. 2015. DOI:10.1109/TMAG.2015.2433933.
   Web of Science ®Google Scholar
• V. Viswanathan, and S. Jeevananthan, “Approach for torque ripple reduction for brushless DC motor based on three-level neutral-point-clamped inverter with DC–DC converter,” IET Power Electron., Vol. 8, no. 1, pp. 47–55, Jan. 2015. DOI:10.1049/iet-pel.2013.0471.
   Web of Science ®Google Scholar
• G. Krishnan, and K. T. Ajmal, “A neoteric method based on PWM ON PWM scheme with buck converter for torque ripple minimization in BLDC drive,” in 2014 Annual International Conference on Emerging Research Areas: Magnetics, Machines and Drives (AICERA/iCMMD), Kottayam, 2014, pp. 1–6, DOI:10.1109/AICERA.2014.6908186.
   Google Scholar
• V. Viswanathan, and J. Seenithangom, “Commutation torque ripple reduction in the BLDC motor using modified SEPIC and three-level NPC inverter,” IEEE Trans. Power Electron., Vol. 33, no. 1, pp. 535–46, Jan. 2018. DOI:10.1109/TPEL.2017.2671400.
   Web of Science ®Google Scholar
• M. A. Doss, E. P. Kumar, G. R. Kumar, and J. Hussain, “Harmonics and torque ripple reduction of brushless DC motor (BLDCM) using cascaded H-bridge multilevel inverter,” in 2013 International Conference on Power, Energy and Control (ICPEC), Sri Rangalatchum Dindigul, 2013, pp. 296–99. DOI:10.1109/ICPEC.2013.6527669.
   Google Scholar
• V. Viswanathan, and S. Jeevananthan, “Hybrid converter topology for reducing torque ripple of BLDC motor,” IET Power Electron., Vol. 10, no. 12, pp. 1572–87, Oct. 2017. DOI:10.1049/iet-pel.2015.0905.
   Web of Science ®Google Scholar
• A. Azarudeen, and D. Mary, “Performance analysis of conventional and digital PWM control scheme for speed control of BLDC motor drives,” in 2017 International Conference on Advances in Electrical Technology for Green Energy (ICAETGT), Coimbatore, India, 2017, pp. 69–75, DOI:10.1109/ICAETGT.2017.8341460.
   Google Scholar
• C. K. Lad, and R. Chudamani, “Simple overlap angle control strategy for commutation torque ripple minimisation in BLDC motor drive,” IET Electr. Power Appl., Vol. 12, no. 6, pp. 797–807, Jul. 2018. DOI:10.1049/iet-epa.2017.0644.
   Web of Science ®Google Scholar
• Y. Lee, “Commutation torque ripple minimization for three phase BLDC motor drive using a simple PWM scheme reliable to motor parameter variation,” in 2019 IEEE PES Asia-Pacific Power and Energy Engineering Conference (APPEEC), Macao, Macao, 1–4, 2019. DOI:10.1109/APPEEC45492.2019.8994517.
   Google Scholar
• S. B. Ozturk, and H. A. Toliyat, “Direct torque and indirect flux control of brushless DC motor,” IEEE/ASME Trans. Mechatron., Vol. 16, no. 2, pp. 351–60, April 2011. DOI:10.1109/TMECH.2010.2043742.
   Web of Science ®Google Scholar
• B. K. Baby, and S. George, “Influence of maximum current control strategy on torque ripple in BLDC motor,” in 2018 IEEE International Conference on Power Electronics, Drives and Energy Systems (PEDES), Chennai, India, 2018, pp. 1–5, DOI:10.1109/PEDES.2018.8707680.
   Google Scholar
• R. S. Arashloo, M. Salehifar, J. L. R. Martinez, and F. Andrade, “Predictive deadbeat current control of five-phase BLDC machines,” in IECON 2014 - 40th Annual Conference of the IEEE Industrial Electronics Society, Dallas, TX, USA, 2014, pp. 3049–3053, DOI:10.1109/IECON.2014.7048944.
   Google Scholar
• S. Yaya, and W. Honghua, “Research on reduction of commutation torque ripple in brushless DC motor drives based on fuzzy logic control,” in 2009 International Conference on Computational Intelligence and Security, Beijing, 2009, pp. 240–43, DOI:10.1109/CIS.2009.158.
   Google Scholar
• R. Manikandan, R. Arulmoziyal, and K. R. Priyadharsini, “Fuzzy PI based speed sensorless speed control of position sensorless BLDC drive,” in 2013 IET Chennai Fourth International Conference on Sustainable Energy and Intelligent Systems (SEISCON), Chennai, 2013, pp. 57–64, DOI:10.1049/ic.2013.0294.
   Google Scholar
• A. Darba, F. De Belie, P. D'haese, and J. A. Melkebeek, “Improved dynamic behavior in BLDC drives using model predictive speed and current control,” IEEE Trans Ind Electron., Vol. 63, no. 2, pp. 728–40, Feb. 2016. DOI:10.1109/TIE.2015.2477262.
   Web of Science ®Google Scholar
• F. Naseri, E. Farjah, E. Schaltz, K. Lu, and N. Tashakor, “Predictive control of low-cost three-phase four-switch inverter-fed drives for brushless DC motor applications,” IEEE Trans Circuits and Systems I: Regular Papers, Vol. 68, no. 3, pp. 1308–18, March 2021. DOI:10.1109/TCSI.2020.3043468.
   Web of Science ®Google Scholar
• K. Xia, Y. Ye, J. Ni, Y. Wang, and P. Xu, “Model predictive control method of torque ripple reduction for BLDC motor,” IEEE Trans. Magn., Vol. 56, no. 1, pp. 1–6, Jan. 2020. 7503106, DOI:10.1109/TMAG.2019.2950953.
   Web of Science ®Google Scholar
• M. Lei, Y. Li, C. Zhao, Z. Li, F. Xu, F. Gao, and P. Wang, “Full degree of freedom based control scheme of the single-phase direct AC–AC modular multilevel converter for railway power conditioning under asymmetric branch conditions,” IEEE Trans. Ind. Electron., Vol. 67, no. 3, pp. 1671–83, March 2020. DOI:10.1109/TIE.2019.2903771.
   Web of Science ®Google Scholar
• R. Jaiswal, A. Agarwal, and R. Negi, “Performance enhancement of modular multilevel converter by using modulation technique,” in 2019 IEEE 1st International Conference on Energy, Systems and Information Processing (ICESIP), Chennai, India, 2019, pp. 1–6, DOI:10.1109/ICESIP46348.2019.8938362.
   Google Scholar
• M. Ayari, S. Bichiou, M. M. Belhaouane, and N. B. Braiek, “An advanced anti-windup control strategy for MMC-HVDC system,” IETE. J. Res., Vol. 68, no. 3, pp. 1831–46, Nov. 2019. DOI:10.1080/03772063.2019.1676663.
   Web of Science ®Google Scholar
• A. Dekka, B. Wu, V. Yaramasu, R. L. Fuentes, and N. R. Zargari, “Model predictive control of high-power modular multilevel converters—An overview,” IEEE. J. Emerg. Sel. Top. Power. Electron., Vol. 7, no. 1, pp. 168–83, March 2019. DOI:10.1109/JESTPE.2018.2880137.
   Web of Science ®Google Scholar
• Y. S. Rao, and M. K. Pathak, “Model predictive control for three-level cascaded H-bridge D-STATCOM,” IETE. J. Res., Vol. 66, no. 1, pp. 65–76, Jun. 2018. DOI:10.1080/03772063.2018.1476189.
   Web of Science ®Google Scholar
• P. Karamanakos, E. Liegmann, T. Geyer, and R. Kennel, “Model predictive control of power electronic systems: methods, results, and challenges,” IEEE Open J. Ind. Appl., Vol. 1, pp. 95–114, Aug. 2020. DOI:10.1109/OJIA.2020.3020184.
   Google Scholar
• M. Vasiladiotis, A. Christe, and T. Geyer, “Model predictive pulse pattern control for modular multilevel converters,” IEEE Trans. Ind. Electron., Vol. 66, no. 3, pp. 2423–31, March 2019. DOI:10.1109/TIE.2018.2868294.
   Web of Science ®Google Scholar
• A. Devanshu, M. Singh, and N. Kumar, “Adaptive predictive current control of field-oriented controlled induction motor drive,” IETE. J. Res., Vol. 68, no. 5, pp. 3707–19, Jun. 2020. DOI:10.1080/03772063.2020.1775502.
   Web of Science ®Google Scholar
• M. E. Zarei, D. Ramírez, C. V. Nicolas, and J. R. Arribas, “Three-Phase four-switch converter for SPMS generators based on model predictive current control for wave energy applications,” IEEE Trans. Power Electron., Vol. 35, no. 1, pp. 289–302, Jan. 2020. DOI:10.1109/TPEL.2019.2911209.
   Web of Science ®Google Scholar
• A. Srivastava, and R. S. Bajpai, “Model predictive control of grid-connected wind energy conversion system,” IETE. J. Res., Vol. 68, no. 5, pp. 3474–86, Jun, 2020. DOI:10.1080/03772063.2020.1768905.
   Web of Science ®Google Scholar
• H. Mahmoudi, M. Aleenejad, and R. Ahmadi, “A new multiobjective modulated model predictive control method with adaptive objective prioritization,” IEEE Trans. Ind. Appl., Vol. 53, no. 2, pp. 1188–99, March-April 2017. DOI:10.1109/TIA.2016.2624738.
   Web of Science ®Google Scholar
• L. Tarisciotti, P. Zanchetta, A. Watson, S. Bifaretti, and J. C. Clare, “Modulated model predictive control for a seven-level cascaded H-bridge back-to-back converter,” IEEE Trans. Ind. Electron., Vol. 61, no. 10, pp. 5375–83, Oct. 2014. DOI:10.1109/TIE.2014.2300056.
   Web of Science ®Google Scholar