References
- G. Murad, I. P. Waite, and G. Da Wei, “A discrete time internal model based H∞ controller and its application to a binary distillation column,” J. Process Control, Vol. 7, no. 6, pp. 451–65, 1997. DOI: 10.1016/S0959-1524(97)00025-5.
- N. Katal, and S. Narayan, “Automated synthesis of multivariate QFT controller and pre-filter for a distillation column with multiple time delays,” J. Process Control, Vol. 99, pp. 79–106, 2021. DOI: 10.1016/j.jprocont.2020.12.004.
- M.-C. Pai, “Disturbance observer-based global sliding mode control for uncertain time-delay nonlinear systems,” IETE. J. Res., Vol. 66, no. 3, pp. 1–10, 2020. DOI: 10.1080/03772063.2020.1756935.
- M. Montazeri, M. R. Yousefi, K. Shojaei, and G. Shahgholian, “Design of fast variable structure adaptive fuzzy control for nonlinear state-delay systems with uncertainty,” IETE. J. Res., Vol. 66, no. 4, pp. 1–12, 2020. DOI: 10.1080/03772063.2020.1800522.
- A. Osman, T. Kara, and M. Arıcı, “Robust adaptive control of a quadruple tank process with sliding mode and pole placement control strategies,” IETE. J. Res., Vol. 67, no. 2, pp. 1–14, 2021. DOI: 10.1080/03772063.2021.1892537.
- M. Doostinia, M. T. H. Beheshti, M. Babaei, S. A. Alavi, and A. Ramezani, “Control of main steam pressure in coal-fired power plant boilers by fractional-order controller with smith predictor structure for delay compensation,” IETE. J. Res., Vol. 67, no. 3, pp. 1–14, 2021. DOI: 10.1080/03772063.2021.1939804.
- M. Jain, A. Rani, N. Pachauri, V. Singh, and A. P. Mittal, “Design of fractional order 2-DOF PI controller for real-time control of heat flow experiment,” Eng. Sci. Technol., Int J., Vol. 22, pp. 215–28, 2019. DOI: 10.1016/j.jestch.2018.07.002.
- N. Pachauri, V. Singh, and A. Rani, “Two degree of freedom PID based inferential control of continuous bioreactor for ethanol production,” ISA Trans., Vol. 68, pp. 235–50, 2017. DOI: 10.1016/j.isatra.2017.03.014.
- A. Ghosh, T. Rakesh Krishnan, P. Tejaswy, A. Mandal, J. K. Pradhan, and S. Ranasingh, “Design and implementation of a 2-DOF PID compensation for magnetic levitation systems,” ISA Trans., Vol. 53, pp. 1216–22, 2014. DOI: 10.1016/j.isatra.2014.05.015.
- S. Srivastava, and V. S. Pandit, “A 2-Dof LQR based PID controller for integrating processes considering robustness/performance tradeoff,” ISA Trans., Vol. 71, pp. 426–39, 2017. DOI: 10.1016/j.isatra.2017.09.010.
- B. B. Musmade, and B. M. Patre, “Feedforward-plus-sliding mode controller design with experimental application of coupled tank system,” Trans. Inst. Meas. Control, Vol. 35, no. 8, pp. 1058–67, 2016. DOI: 10.1177/0142331213480384.
- A. K. Singh, B. Tyagi, and V. Kumar, “Application of feed forward and recurrent neural network topologies for the modeling and identification of binary distillation column,” IETE. J. Res., Vol. 59, no. 2, pp. 167–75, 2013. DOI: 10.4103/0377-2063.113038.
- C. Jia, “Sliding mode preview control for a class of continuous time linear systems,” Iranian J Sci Technol.- Trans. Electric. Eng., Vol. 44, no. 1, pp. 1501–11, 2020. DOI: 10.1007/s40998-020-00331-7.
- R. K. Wood, and M. W. Berry, “Terminal composition control of a binary distillation column,” Chem. Eng. Sci., Vol. 28, no. 9, pp. 1707–17, 1973. DOI: 10.1016/0009-2509(73)80025-9.
- V. D. Hajare, and B. M. Patre, “Decentralized PID controller for TITO systems using characteristic ratio assignment with an experimental application,” ISA Trans., Vol. 59, no. 6, pp. 385–97, 2015. DOI: 10.1016/j.isatra.2015.10.008.
- B. J. Parvat, and B. M. Patre, “Fast terminal sliding mode controller for square multivariable processes with experimental application,” Int. J. Dyn. Control, Vol. 5, no. 4, pp. 1–8, 2016. DOI: 10.1007/s40435-016-0262-x.
- G. Stephanopoulos. Chemical process control: An introduction to theory and practice. New Delhi: PHI Learning Private Limited, 2014, pp. 411–30.
- F. Liao, Y. Liao, and J. Den, “The application of predictor feedback in designing a preview controller for discrete timesystems with input delay,” Math. Probl. Eng., Vol. 5, no. 8, pp. 1–10, 2016. DOI: 10.1155/2016/3023915.
- C. B. Kadu, A. A. Khandekar, and C. Y. Patil, “Sliding mode controller with state observer for TITO systems with time delay,” Int. J. Dyn. Control, Vol. 6, pp. 799–808, 2018. DOI: 10.1007/s40435-017-0342-6.
- K. Ogata. Discrete time control systems. New Jersey: Prentice Hall International, 2005, pp. 566–629.
- A. A. Khandekar, and B. M. Patre, “Decentralized discrete sliding mode controller for TITO process with time dealy with experimental application,” Int. J. Dyn. Control, Vol. 5, no. 3, pp. 614–28, 2017. DOI: 10.1007/s40435-015-0202-1.
- A. A. Khandekar, and B. M. Patre, “Discrete sliding mode control for robust tracking of time delay systems,” Syst. Sci. Control Eng., Vol. 2, pp. 457–64, 2014. DOI: 10.1080/21642583.2014.913214.
- G. Weibing, Y. Wang, and A. Homaifa, “Discrete time variable structure control systems,” IEEE Trans. Ind. Electron., Vol. 42, no. 2, pp. 117–22, 1995. DOI: 10.1109/41.370376.
- S. N. Pawar, R. H. Chile, and B. M. Patre, “Modified reduced order observer based linear active disturbance rejection control for TITO systems,” ISA Trans., Vol. 71, no. 6, pp. 480–94, 2017. DOI: 10.1016/j.isatra.2017.07.026.
- H. Waschl, J. B. Jorgensen, J. K. Huusom, and L. del Re, “A tuning approach for offset-free MPC with conditional reference adaptation,” IFAC Proc. Vol., Vol. 47, no. 3, pp. 3062–7, 2021. DOI: 10.3182/20140824-6-ZA-1003.02369.
- C. C. F. Rodolfo, C. T. Bismark, E. N. R. Julio, and U. C. Marcus, “Unified approach for minimal output dead time compensation in MIMO processes,” J. Process Control, Vol. 21, no. 7, pp. 1080–91, 2011. DOI: 10.1016/j.jprocont.2011.05.005.
- C. Leandro dos Santos, and M. W. Pessoa, “A tuning strategy for multivariable PI and PID controllers using differential evolution combined with chaotic Zaslavskii map,” Expert. Syst. Appl., Vol. 38, no. 11, pp. 13694–701, 2011. DOI: 10.1016/j.eswa.2011.04.156.
- T. N. Vu, and M. Lee, “An extended method of simplified decoupling for multivariable processes with multiple time delays,” J. Chem. Eng. Jpn., Vol. 46, no. 1, pp. 279–93, 2013. DOI: 10.2316/P.2012.769-083.