40
Views
38
CrossRef citations to date
0
Altmetric
Original Articles

Some Environmental Factors Affecting Surface Coating Formation with Lubricating Oil Additives

Pages 88-100 | Published online: 25 Mar 2008

REFERENCES

  • Borsoff , V. N. , and Wagner , C. D. , “ Studies of Formation and Behavior of an Extreme Pressure Film ,” Lubrication Eng. 13 , 91 – 99 ( 1957 ).
  • Loeser , E. H. , Wiquist , R. C. , and Twiss , S. B. , “ Cam and Tappet Lubrication IV Radioactive Study of Sulfur in the EP Film ,” ASLE Trans. 2 , 199 – 207 ( 1959 ).
  • Manteuffel , A. A. , Yates , K. P. , Bickford , H. J. , and Wolfram , G. , “ Radiotracers Reveal Activity of Extreme-Pressure Additives in Lubrication ,” ASLE Trans. 7 , 249 – 256 ( 1964 ).
  • Rounds , F. G. , “ Effects of Additives on the Friction of Steel on Steel Part I. Surface Topography and Film Composition Studies ,” ASLE Trans. 7 , 11 – 23 ( 1964 ).
  • Prutton , C. F. , Turnbull , D. , and Dlouhy , G. , “ Mechanism of Action of Organic Chlorine and Sulfur Compounds in Extreme Pressure Lubrication ,” J. Inst, Petrol. 32 , 90 – 118 ( 1946 ).
  • Barcroft , F. T. , and Daniel , S. G. , “ The Action of Neutral Organic Phosphates as EP Additives ,” ASME Paper 64-LUB-22, presented at International ASME-ASLE Joint Lubrication Conference, Washington, D.C., October, 1964 .
  • Johnson , J. L. , “ Determination of Micro Amounts of Zinc, Phosphorus, and Sulfur in Oil-Additive Decomposition Films on Bearings ,” Microchem. J. 8 , 59 – 68 ( 1964 ).
  • Rounds , F. G. , “ Effects of Additives on the Friction of Steel on Steel Part II. Additive—Base Oil Interactions ,” ASLE Trans. 8 , 21 – 28 ( 1965 ).
  • Fein , R. S. , and Kreuz , K. L. , “ Chemistry of Boundary Lubrication of Steel by Hydrocarbons ,” ASLE Trans. 8 , 29 – 38 ( 1965 ).
  • Furey , M. J. , “ Film Formation by an Antiwear Additive in an Automobile Engine ,” ASLE Trans. 2 , 91 – 100 ( 1959 ).
  • Sakurai , T. , Ikeda , S. , and Okabe , H. , “ A Kinetic Study on the Reaction of Labeled Sulfur Compounds with Steel Surfaces during Boundary Lubrication ,” ASLE Trans. 8 , 39 – 47 ( 1965 ).
  • Rounds , F. G. , “ Effect of Lubricant Composition on Friction as Measured with Thrust Ball Bearings ,” J. Chem. Eng. Data 5 , 499 – 507 ( 1960 ).
  • Gallopoulos , N. E. , “ Use of the Isoteniscope to Study the Thermal Decomposition of Lubricants ,” presented at SAE Annual Meeting, Paper No. 458F, Detroit, Michigan, January, 1962 .
  • Colthup , N. B. , Daly , L. H. , and Wiberley , S. E. , “ Introduction to Infrared and Raman Spectroscopy ,” Academic Press , New York , 1964 .
  • Bellamy , L. J. , “ The Infrared Spectra of Complex Molecules ,” Wiley , New York , 1959 .
  • Archard , J. F. , “ The Temperature of Rubbing Surfaces ,” Wear 2 , 438 – 55 ( 1958 ).
  • Feng , I-Ming , “ Pyrolysis of Zinc Dialkyl Phosphorodithioate and Boundary Lubrication ,” Wear 3 , 309 – 311 ( 1960 ).
  • Rowe , C. N. , and Dickert , J. J. , Jr. , “ Thermal Decomposition and Antiwear Function of Metal O,O-dialkylphos-phorodithioates ,” presented at Am. Chem. Soc. Meeting, Detroit, Michigan, April 4–9, 1965 .
  • Rounds , F. G. , “ Influence of Glycol Molecular Configuration on Friction ,” ASLE Trans. 6 , 89 – 101 ( 1963 ).
  • Campbell , W. E. , and Lee , R. E. , Jr. , “ Polymer Formation on Sliding Metals in Air Saturated with Organic Vapors ,” ASLE Trans. 5 , 91 – 103 ( 1962 ).
  • Vinogradov , G. V. , Nametkin , N. S. , and Nossov , M. I. , “ Antiwear and Antifriction Properties of Polyorganosiloxanes and Their Mixtures with Hydrocarbons ,” presented at International ASME-ASLE Joint Lubrication Conference, Washington, D.C., October, 1964 .

REFERENCES

  • Hoock , W. S. , and Kleinholz , M. P. , “ Wear Problems Influence Motor Oil Development ” 1961 SAE International Congress and Exposition of Automotive Engineering, Detroit, Michigan, 1961 .
  • Carroll , K. G. , and Iwanski , J. S. , discussion of reference A1 .

REFERENCES

  • Frassa , K. A. , Siegfried , R. K. , and Houston , C. A. , “ Modern Analytical Techniques to Establish Realistic Crankcase Drains ,” presented at the International Automotive Congress, SAE, Detroit, January 1965 .

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.