REFERENCES
- Gross , W. A. , et al, Fluid Film Lubrication , Chapter 2 , John Wiley & Sons , New York ( 1980 ).
- Cameron , A. , Basic Lubrication Theory , Chapter 4 , Ellis Horwood Limited , Coll House, Westergate, Chichester England ( 1976 ).
- Rangert , B. , Hydrodynamic Piston Ring Lubrication with reference to Lubricating Oil Consumption , Chalmers Tekniska Hogskola , Goteborg Sweden ( 1974 ).
- See Dowson , D. , et al, “ Piston Ring Lubrication—Part II, Theoretical Analysis of a Single Ring and a Complete Ring Pack ,” pp 23 – 52 and Ruddy, B. L., et al, “Piston Ring Lubrication—Part III, The Influence of Ring Dynamics and Ring Twist,” in Energy Conservation Through Fluid Film Lubrication Technology—Frontiers in Research and Design , edited by S. M. Rohde , D. F. Wilcock , H. S. Cheng , ASME ( 1978 ).
- Forbes , J. E. and Taylor , E. S. , “ A Method of Studying Piston Ring Friction ,” NACA Tech. Note No. 1249, August 1947 .
- Wing , R. D. and Saunder , A. O. , “ Oil Film Temperature and Thickness Measurements on the Piston Rings of a Diesel Engine ,” Proc. Inst. Mech. Engs. , 186/172 , pp 1 – 9 D1–D9 ( 1972 ).
- Furuhama , S. and Hiruma , M. , “ The Relationship Between Plston Ring Scuffing and the Formation of Surface Profile ,” Proc. Inst. Mech. Engs. 67/75 , pp 35 – 43 ( 1975 ).
- Furuhama , S. , “ Dynamic Theory of Piston Ring Lubrication ,” JSME Bull. , 2 , 7 , ( 1959 ).
- Shin , K. , Tateshi , Y. , and Furuhama , S. , “ Measurement of Oil Film Thickness Between Piston Ring and Cylinder ,” SAE paper No. 830068 ( 1983 ).
- Furuhama , S. , Takiguchi , M. , and Tomizawa , K. , “ Effect of Piston Ring Designs on the Piston Friction Forces in Diesel Engines,” SAE paper No. 810977, in Diesel Oil Consumption, SP-494 , Milwaukee , WI ( 1981 ).
- Brown , S. R. and Hamilton , G. M. , “ Negative Pressures Under a Lubricated Piston Ring ,” J. Mech. Eng. Sci. , 20 , 1 , pp 49 – 57 ( 1978 ).
- Hays , D. and Feiten , J. B. , “ Cavitation in Lubricating Oil Films,” in Cavitation in Real Liquids , R. Darvies , ed. Elsevier Publishing Co. , Amsterdam ( 1964 ).
- Cole , J. D. , Perturbation Methods in Applied Mathematics , Blaisdell Publishing Co. , Waltham MA ( 1968 ).
- Van Dyke , M. , Perturbation Methods in Fluid Mechanics , Academic Press, Inc. ( 1964 ).
- Taylor , G. I. and Saffman , P. G. , “ Effects of Compressibility at Low Reynolds Number ,” J. Aeronaut. Sci. , 24 : 553 – 562
- Abramovitz , S. , “ Theory for a Slider Bearing with a Convex Pad Surface; Side Flow Neglected ,” J. Franklin Inst. , 259 : 221 – 233
- Chang , C. T. , “ Piston Ring Friction ,” MS Thesis, ME Department, MIT, 1982 .
- Wentworth , J. T. , “ Effect of Top Compression Ring Profile on Oil Consumption and Blowby With the Sealed Ring-Orifice Design ,” SAE paper No. 820089 ( 1982 ).
- Moore , S. L. and Hamilton , G. M. , “ The Starved Lubrication of Piston Rings in a Diesel Engine ,” J. Mech. Eng. Sci., IMechE , 20 , 6 , pp 345 – 352 ( 1978 ).
- Johnson , K. L. and Tevaarwerk , J. L. , “ Shear Behavior of Elastohydrodynamic Oil Films ,” Proc. Roy. Soc. London, Series 356A , pp 215 – 236 ( 1977 ).
- Shin , K. , Tateshi , Y. , and Furuhama , S. , “ Measurement of Oil Film Thickness Between Piston Ring and Cylinder ,” SAE paper No. 830068 ( 1983 ).
- Bair , S. and Winer , W. O. , “ Shear Strength Measurements of Lubricants at High Pressure ,” ASME J. Lubr. Tech. , 101 , pp 251 – 257 ( 1979 ).
- Bair , S. and Winer , W. O. , “ Some Observations on the Relationship Between Lubricant Mechanical and Dielectric Transitions Under Pressure ,” ASME J. Lubr. Tech. , 102 , p 229 , April ( 1980 ).
- Ting , L. L. , “ Lubricated Piston Rings and Cylinder Bore Wear ,” Wear Control Handbook , pp 609 – 667 ASME ( 1980 ).