16
Views
9
CrossRef citations to date
0
Altmetric
Original Articles

An Analysis of the Ga/In/WSe2 Lubricant Compact

Pages 231-238 | Published online: 25 Mar 2008

REFERENCES

  • Boes , D. J. , “ Unique Solid Lubricating Materials for High Temperature-Air Applications ,” ASLE Trans. , 10 , p 19 ( 1967 ).
  • Boes , D. J. and Chamberlain , B. , “ Chemical Interactions Involved in the Formation of Oxidation-Resistant Solid Lubricant Composites ,” ASLE Trans. , 11 , p 131 ( 1968 ).
  • Boes , D. J. et al, “ The Solid Lubrication of Ball Bearings Under High Speed—High Load Conditions from − 225 to + 1000°F ,” Lubr. Eng. , 27 , p 150 ( 1971 ).
  • King , A. E. , “ 300°C Rotating Rectifier Alternator ,” NAECON 72 Record, pp 136 – 142 ( 1972 ).
  • Jones , J. R. and Gardos , M. N. , “ Friction and Wear Characteristics of Lubricative Composites in Air and in Vacuum ,” Lubr. Engr. , 27 , p 47 ( 1971 ).
  • Jones , J. R. and Gardos , M. N. , “ Transfer Film Formation by Lubricative Composites ,” Proc. Intl. Conf. on Solid Lubr. , 24–27 August, 1971 , Denver , Colorado , pp 185 – 197 ASLE SP-3.
  • Martin , P. , Jr. and Murphy , G. P. , “ High Speed Oscillating Tests of Lubricating Composites ,” Lubr. Engr. , 29 , 11 , p 484 ( 1973 ).
  • Gardos , M. N. and McConnell , B. D. , “ Development of a High-Load, High-Temperature, Self-Lubricating Composite—Part I: Polymer Matrix Selection; Part II: Reinforcement Selection; Part III: Additives Selection; Part IV: Formulation and Performance of the Best Composites ,” ASLE SP-9, 1982 .
  • Kiparisov , S. S. , et al, Moskovskii Institut Stali i Splavov (Moscow Inst. of Steels and Alloys) Moscow, USSR, “Investigation of the Structure and Properties of a WSe2-Based Self-Lubricating Material ,” Poroshkovaia Metallurgiia (Soviet Powder Metallurgy) , 185 , 5 , pp 88 – 91 (May 1978 ).
  • Gardos , M. N. and Meeks , C. R. , “ Solid Lubricated Rolling Element Bearings—Part II: Turbine Bearings and the Associated Solid Lubricants Research, Volume 1: Summary; Volumes 2, 3 and 4: Appendices ,” AFWAL-TR-83-4129, Final Report, Hughes Aircraft Company, El Segundo, California, February 1984 .
  • Dill , J. F. et al., “ Feasibility of Dry Lubrication for Limited Duty Gas Turbine Engines ,” paper presented at the AIAA/ARE/ADME 19th Joint Propulsion Conf., June 27–29, 1983 , Seattle , Washington, AIAA Preprint No. 83-1130.
  • Yonushonis , T. M. , “ Dry Lubrication of High Temperature Silicon Nitride Rolling Contracts ,” Final Report, NASC Contract No. N00019-79-C-0612, SKF Industries, Inc. Report No. 2 AT80C040, November 1980 .
  • Stone , H. E. N. , “ The Oxidation of Metals in Relation to the Periodic Classification ,” J. Mat. Sci. , 7 , pp 1147 – 1153 ( 1972 ).
  • Shakalov , F. E. and Kirovskaya , I. A. , “ Mechanism of a Chemical Reaction in the Gallium-Gallium (III) Oxide System ,” Tezisy Dokl.—Soveshch. Kinet. Mekh, Khim. Reakts. Tverd. Tele, 7th, Vol. 2 , pp 133 – 135 1977 (USSR).
  • Hewitt , R. W. and Winograd , N. “ Oxidation of Polycrystalline Indium Studied by X-Ray Photoelectron Spectroscopy and Static Secondary Mass Spectroscopy ,” J. Appl. Phys. , 51 , 5 , pp 2620 – 2624 ( 1980 ).
  • Ageev , L. A. and Shklyarev , I. N. , “ Investigation of the Kinetics of Growth of an Oxide Film on the Surface of Indium ,” Soviet Phys.—Solid State , 9 , 10 , pp 2324 – 2327 ( 1968 ).
  • Wager , J. F. and Wilmsen , C. W. , “ Thermal Oxidation of InP ,” J. Appl. Phys. , 51 , 1 , pp 812 – 814 ( 1980 ).
  • Yamaguchi , M. and Ando , K. , “ Thermal Oxidation of InP and Properties of Oxide Film ,” J. Appl. Phys. , 51 , 9 , pp 5007 – 5012 ( 1980 ).
  • Sealy , J. J. and Hemment , P. L. F. , “ Structure and Composition of Native Oxides on GaAs ,” Thin Solid Films , 22 , pp 539 – 543 ( 1974 ).
  • Emelyanov , A. V. , et al, Kristallografiya , 20 , 3 , pp 611 – 14 ( 1975 ).
  • Mukhergee , A. K. , et al, “ X-Ray Study of the Air-Oxidized Gallium Selenide (α-Ga2-Se3) and Gallium Telluride (Ga2 Te3) Powders ,” Bull. Mat. Sci. , 2 , 1 , pp 55 – 60 ( 1980 ).
  • Fleming , K. P. H. , “ Dispersion Strengthening and Solid Solution Strengthening of Nickel Base Alloys with TaC and TiC Additions, Using Powder Metallurgical Techniques ,” Proc. 10th Plansee Seminar, Reutte, Austria, June 1–5, 1981 (Metallwerk Plansee GmbH) , pp 465 – 485 ( 1981 ).
  • Camerson , C. B. et al. “ TRIBALOY Intermetallic Alloy Compositions—New Materials or Additives for Wear Resistant Applications ,” Proc. Nat. Powder Metallurgy Conf., Atlanta, Georgia , May 13–14, 1975 , pp 41 – 51 ( 1975 ).
  • Handbook of Chemistry and Physics , 53rd Edition 1972–73 , The Chemical Rubber Co. , Cleveland Ohio .
  • Gardos , M. N. , et al, “ Solid Lubricated Turbine Bearings: Part I—Preparation of 316°C Lubricative Composites and Separators ,” paper to be presented at the Third International Solid Lubricants Conf., Denver, Colorado, August 5–9, 1984 .
  • Sutor , P. and Gardos , M. N. , “ Solid Lubricated Turbine Bearings: Part II—Development of 316°C Separator Composites for a Steel Counterface ,” ibid.
  • Gardos , M. N. and Sutor , P. , “ Solid Lubricated Turbine Bearings: Part III—Development of 316°C Separator Composites for a Ceramic Counterface ,” ibid.
  • Barber , S. A. and Kannel , J. W. , “ Solid Lubricated Turbine Bearings: Part IV—Transfer Mechanism for Solid Film Lubrication ,” ibid.
  • Meeks , C. R. and Eusepi , M. W. , “Solid Lubricated Turbine Bearings: Part V—Development of High Temperature, High Speed Turbine Bearings, ibid.
  • Zbitnew , K. and Woolley , J. C. , “ The Quaternary Alloy System Alx,Gaylnl-x-ySb ,” J. Appl. Phys. , 52 , 11 , pp 6611 – 6616 ( 1981 ).
  • Malinochka , E. Ya , et al. “ Relaxation Processes in the Heating of Amorphous Metallic Alloys ,” Izv. Akad. Nauk SSSR, Met. 3 , pp 99 – 102 ( 1982 ) (Russ.)

REFERENCES

  • Eppinga , R. et al, “ Photoelectron Spectra of 2H TaS2 and SnTaS2 ,” J. Phys. C , 9 , pp 3371 – 3380 ( 1976 ).

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.