An Experimental and Theoretical Study of Pressure and Thermal Distortions in a Mechanical Seal

REFERENCES

• Fisher , M J. , “ An Analysis of the Deformation of the Balanced Ring in High Pressure Radial-Face Seals ,” 1st Intl. Conf. on Fluid Sealing, Paper D4 , BHRA Fluid Eng. , Cranfield , UK ( 1969 ).
   Google Scholar
• Nau , B S. and Turnbull , D E. , “ Some Effects of Elastic Deformation on the Characteristics of Balanced Radial Face Seals ,” 1st Intl. Conf. on Fluid Sealing, Paper D3 , BHRA Fluid Eng. , Cranfield , UK ( 1969 ).
   Google Scholar
• Graham , W R. , “ A Theoretical Analysis of Pressure Distortion in Mechanical Seal Faces ,” T. I. Research Laboratories , Report No. 228, Hinxton , UK ( 1967 ).
   Google Scholar
• Graham , W R. , Daisley , M J. , and Green , A P. , “ Pressure Distortion in Mechanical Seals ,” T. I. Research Laboratories , Report No. 227, Hinxton , UK ( 1968 ).
   Google Scholar
• Horwood , G P. , “ A Computer Program for Analysis of Plane and Axisymmetric Bodies Under Mechanical and Thermal Loading ,” T. I. Research Laboratories , Report No. E/21, Hinxton , UK ( 1971 ).
   Google Scholar
• Metcalfe , R. , “ The Use of Finite Element Deflection Analysis in Performance Prediction for End Face Seals ,” Proc. 3rd Symp. on Eng. Applications of Solid Mechanics , Univ. of Toronto (June, 1976 ).
   Google Scholar
• Denny , D F. , “ Some Measurements of Fluid Pressure Between Plane Parallel Thrust Surfaces With Special Reference to Radial-Face Seals ,” Wear , 4 , pp 64 – 83 ( 1961 ).
   Google Scholar
• Batch , B A. and Iny , E H. , “ Pressure Generation in Radial-Face Seals ,” 2nd Intl. Conf. on Fluid Sealing, Paper F4 , BHRA Fluid Eng. , Cranfield , UK ( 1964 ).
   Google Scholar
• Pape , J G. , “ Fundamental Research on a Radial Face Seal ,” ASLE Trans. , 11 , pp 302 – 309 ( 1968 ).
   Google Scholar
• Anno , J N. , “ Hydrodynamic Film-Thickness Determinations in a Face Seal ,” Lubr. Eng. , 31 , 3 , pp 132 – 135 ( 1975 ).
   Google Scholar
• Stanghan-Batch , B A. , “ Face Lubrication in Mechanical Seals ,” Proc. 9th Tribol. Conv., paper C59/71 , Instn. Mech. Engrs. ( 1971 ).
   Google Scholar
• Winney , P E. , “ The Thickness Measurement of Thin Fluid Films by a Magnetic Reluctance Technique ,” J. Phys. Engng. (Series 2), 1 ( 1968 ).
   Google Scholar
• Snapp , R B. and Sasdelli , K R. , “ Performance Characteristics of a High Pressure Face Seal with Radially Converging Interface Shapes ,” 6th Intl. Conf. on Fluid Sealing, Paper E4 , BHRA Fluid Eng. , Cranfield , UK ( 1973 ).
   Google Scholar
• Metcalfe , R. , “ Performance Analysis of Axisymmetric Flat Face Mechanical Seals ,” 6th Intl. Conf. on Fluid Sealing, Paper D1 , BHRA Fluid Eng. , Cranfield , UK ( 1973 ).
   Google Scholar
• Young , L A. , and Lebeck , A O. , “ Experimental Evaluation of a Mixed Friction Hydrostatic Mechanical Face Seal Model Considering Radial Taper, Thermal Taper, and Wear ,” ASME Trans. , 104 , 4 , pp 439 – 448 ( 1982 ).
   Google Scholar
• Sehnal , J. , Sedy , J. , Zobens , A. , and Etsion , I. , “ Performance of the Coned-Face End Seal with Regard to Energy Conservation ,” ASLE Trans. , 26 , 4 , pp 415 – 429 ( 1983 ).
   Web of Science ®Google Scholar
• Fenner , R T. , “ The Boundary Integral Equation (Boundary Element) Method in Engineering Stress Analysis ,” J. of Strain Analysis , 18 , pp 199 – 205 ( 1983 ).
   Google Scholar
• Tachibana , F. , Fukui , S. , and Mitsumara , H. , “ Heat Transfer in an Annulus with an Inner Rotating Cylinder ,” Bull. JSME , 3 , pp 119 – 123 ( 1960 ).
   Google Scholar