Publication Cover
Drying Technology
An International Journal
Volume 18, 2000 - Issue 7
36
Views
0
CrossRef citations to date
0
Altmetric
Original Articles

RELATIONSHIP OF PROCESS PARAMETERS AND STACK WIDTH IN TIMBER DRYING

Pages 1495-1508 | Published online: 10 May 2007

REFERENCES

  • Cloutier , A. , Fortin , Y. , 1994 , Wood drying modelling based on water potential: a parametric study Proc 4th IUFRO Int. WDC pp. 47 – 54 .
  • Cuppett , D.G. , Moore , C.H. , Crafl , E.P. , 1980 , Experimental and commercial srying 4/4 southern lowland red oak. South. Lumb. 3 pp. 8 – 10 .
  • Feigl , R. , 1972 , Überlegungen für die Auswahl von Holztrockenkammern. Sonderdruck aus., Holz- und Kunstoffverarbeitung", Heft 12.
  • Guzenda , R. , Olek , W. , 1992 , Results of an analysis of energy consumptions in kiln driers for sawn timber equipped with computer systems for steering. Proc 3rd Int. IUFRO Drying Conf. pp. 260 – 268 .
  • Haufa , B. , 1986 , The thickness effect of stickers on air flow rate through model stack. Pr. Inst. Tech. Drewna, R XXX III(1,2) pp. 29 – 40 , (in Polish).
  • Haufa , T. , Haufa , B. , Wojciechowska , D. , 1987 , Effect of the velocity of air flow on the intensity of drying of beech and oak sawn materials. Pr. Inst. Tech Drewna, R.XXXI (1,2) pp 63 – 78 , (in Polish)
  • Koberle , M. , Durisova , V. , Trebula , T. , Viktorin , Z. , 1992 , New Information from the research of the wood of the development of the drying equipment in the CSFR. Proc. 3rd IUFRO Drying Conf. pp 250 – 259
  • Kollmann , F. , Côté , Jr, W.A. , 1968 , Principles of Wood Science and Technology. Part I: Solid Wood. Berlin, Heidelberg, New York , Springer , pp. 592.
  • Kollmann , F. , Schneider A. , 1961 , Der Einfluβ der Strömungsgeschwindigkeit auf die Heiβdampftrocknung von Schnittholz. Holz als Roh- und Werkstoff 19 pp. 464 – 478 .
  • Müller , H. , Türke , G. , 1989 , Senkung des Elektroenergieverbrauches bei der Schnittholztrocknung durch wechselweise Abschaltung von Ventilatoren. Holztechnologie 30 ( 4 ) pp. 195 – 197 .
  • Nakajima , A. , Kawaguchi , N. , Chiba , Y. , Nara , N. , 1990 , Saving electricity needed to operate the ventilator of a lumber dry kiln. J. Hokkaido For. Prod. Res. Inst. 4 ( 1 ).
  • Oliveira , L.C. , Mackay , J.F.G. , Wright , D.M. , Mlcoch , V. , 1994 , Evaluating the impact of variable air velocities on the kiln drying results of window stock hemfir lumber. Proc. 4th Int. IUFRO WDC pp. 231 – 240
  • Rafalski , J. , 1970 , Technological basis of kiln dryers designing. Poznań. Inst. Tech. Drewna, pp. 152 , (in Polish).
  • Riley , S.R. , Hasleu , A.N. , 1996 , Reducing air velocity during timber drying. Proc. 5th Int. IUFRO WDC pp. 301 – 308 .
  • Salin , J-G. , 1996 , Prediction of heat and mass transfer coefficients for individual boards and board surfaces. A review. Proc. 5th Int. IUFRO WDC pp. 49 – 58 .
  • Stevens , W.C. , 1957 , The significance of certain factors that affect the drying of a load of timber. Timb. Technol. No. 2220.
  • Stevens , W.C. , Pratt G.H. , 1955 , The effects of movement in kiln drying. Timb. Technol. 63 pp. 179 – 181 .
  • Vanek , M , 1992 , Monitoring the drying process in industrial kilns by means of heat flux measurement. Proc. 3nd IUFRO Drying Conf pp. 409 – 412 .
  • Viktorin , Z. , 1965 , Prüběh sušiciho procesu v hréni řeziva. Drevérsky Výskum , 4 pp. 241 – 271 .
  • Voronjec , D. , Antonijevic , D. , 1998 , Determination of moist air drying ability using chemical potential of water vapour. Drying Technology , 16 ( 1 – 2 ) pp. 45 – 57 .
  • Widiak , H. , 1995 , Kiln drying efficiency in relation to the type and thickness of sawn timber. Pozn. Tow. Prz. Nauk, Wydz. Nauk Tech., Pr. Kom. Tech. Drewna 14 pp. 77 – 82 , (in Polish).
  • Widiak , H. , 1997 , Selection of air-flow speed in dryer depending on thickness of timber. Przem. Drz. 7 pp. 21 – 23 , (in Polish) .
  • Widiak , H. , Olek , W. , 1998 , Algorithm of drying efficiency calculations of sawn timber kiln drying. Roczniki Akademii Rolniczej w Poznaniu - CCC pp. 39 – 44 , (in Polish).

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.