Recent R&D on Drying Technology in Japan

REFERENCES

• Schoeber , W.J.A.H. ; Thijssen , H.A.C. A short-cut method for the calculation of drying rates for slabs with concentration-dependent diffusion coefficient . AIChE Symposium Series 1977 , 73 ( 163 ), 12 – 24 . [CSA]
   Google Scholar
• Yoshida , M. ; Imakoma , H. ; Okazaki , M. Characteristic functions for the drying of non-hygroscopic porous slab with a constant body temperature . Journal of Chemical Engineering of Japan 1990 , 23 ( 1 ), 58 – 63 . [CSA] [CROSSREF]
   Web of Science ®Google Scholar
• Yoshida , M. ; Imakoma , H. ; Okazaki , M. Estimation of drying rate curves fornon-hygroscopic porous slabs using the characteristic function for the regular regime. Chemical Engineering Process 1991, 30, 87–96. [CSA] [CROSSREF]
   Web of Science ®Google Scholar
• Okazaki , M. Principle and applications of characteristic functions . In Drying 94 , Proceedings of the 9th International Drying Symposium , Rudolph , V. , Keey , R.B. , Eds.; Gold Coast : Australia , 22–25 August 1994 ; Vol. A ; 63 – 74 .
   Google Scholar
• Imakoma , H. ; Maeda , T. ; Kubota , K. ; Yoshida , M. Polymer content profile of porous material wetted with aqueous polymer solution . Kagaku Kogaku Ronbunshu 2002 , 28 ( 2 ), 218 – 220 . [CSA]
   Web of Science ®Google Scholar
• Imakoma , H. ; Hashimoto , Y. ; Kubota , K. ; Yoshida , M. Profiles of moisture and polymer content in porous material wetted with aqueous polymer solution upon convective drying . Kagaku Kogaku Ronbunshu 2002 , 28 ( 4 ), 478 – 480 . [CSA]
   Web of Science ®Google Scholar
• Imakoma , H. ; Nakatake , N. ; Kubota , K. ; Yoshida , M. Simultaneous drying and dehydration of porous material wetted with aqueous polymer solution . Kagaku Kogaku Ronbunshu 2002 , 28 ( 2 ), 221 – 223 . [CSA]
   Web of Science ®Google Scholar
• Imakoma , H. ; Omori , R. ; Kubota , K. ; Yoshida , M. Optimal drying conditions of porous material wetted with aqueous polymer solution . Kagaku Kogaku Ronbunshu 2003 , 29 ( 1 ), 144 – 146 . [CSA]
   Web of Science ®Google Scholar
• Kubota , K. ; Imakoma , H. ; Ohmura , N. ; Toritani , A. Prediction of polymer content profile in convective dried porous slab wetted with polymer solution . Kagaku Kogaku Ronbunshu 2003 , 29 ( 6 ), 819 – 822 . [CSA]
   Web of Science ®Google Scholar
• Yamamoto , T. ; Nishimura , T. ; Suzuki , T. ; Tamon , H. Effect of drying method on mesoporosity of resorcinol-formaldehyde drygel and carbon gel . Drying Technology 2001 , 19 ( 7 ), 1319 – 1333 . [CSA] [CROSSREF]
   Web of Science ®Google Scholar
• Tamon , H. ; Ishizaka , H. Preparation of organic mesoporous gel by supercritical/freeze drying . Drying Technology 1999 , 17 ( 7&8 ), 1653 – 1665 . [CSA]
   Web of Science ®Google Scholar
• Imakoma , H. Recent R&D on drying of film coatings . In Advanced Drying ; Recent Chemical Engineering Series 52; Society of Chemical Engineers Japan , Ed.; Kagaku Kogyosha : Tokyo , 2000 ; 44 – 53 ( in Japanese ).
   Google Scholar
• Takase , K. ; Miura , H. ; Tamon , H. ; Okazaki , M. Structure formation of coated films with dispersed pigments during drying . Drying Technology 1994 , 12 , 1279 – 1296 . [CSA]
   Web of Science ®Google Scholar
• Tamon , H. ; Takase , K. ; Miura , H. ; Okazaki , M. Influence of drying condition son void characteristics of coating layer of magnetic particulate . Journal of Chemical Engineering of Japan 1995 , 28 ( 2 ), 220 – 222 . [CSA] [CROSSREF]
   Web of Science ®Google Scholar
• Tamon , H. ; Takase , K. ; Tanaka , H. ; Miura , H. ; Okazaki , M. Structure formation during drying of coating layer of magnetic particulate containing solvent mixture . Journal of Chemical Engineering of Japan 1995 , 28 ( 3 ), 324 – 328 . [CSA] [CROSSREF]
   Web of Science ®Google Scholar
• Imakoma , H. ; Eda , M. ; Kubota , K. ; Tamamura , M. ; Yoshida , M. Measurement of drying curves by a laboratory-scale double-sided convective dryer . Kagaku Kogaku Ronbunshu 2003 , 29 ( 4 ), 579 – 581 . [CSA]
   Web of Science ®Google Scholar
• Imakoma , H. ; Naki , K. ; Kubota , K. ; Yamamura , M. ; Yoshida , M. Drying of aqueous polyvinyl alcohol solution film with glycerol . Kagaku Kogaku Ronbunshu 2003 , 29 ( 4 ), 582 – 584 . [CSA]
   Web of Science ®Google Scholar
• Imakoma , H. ; Mori , T. ; Kubota , K. ; Yoshida , M. Convective-conductive drying characteristics of thin shrinkable fibrous layer wetted with aqueous polymer solution . Kagaku Kogaku Ronbunshu 2003 , 29 ( 5 ), 695 – 697 . [CSA]
   Web of Science ®Google Scholar
• Itaya , Y. ; Bessho , N. ; Yoshino , M. ; Hasatani , M. Drying of dielectric resin coatings in the presence of polycondensation . Drying Technology 1997 , 15 ( 2 ), 427 – 440 . [CSA]
   Web of Science ®Google Scholar
• Itaya , Y. ; Bessho , N. ; Hasatani , M. Heat and mass transfer with polycondensation in resin film during drying . Drying Technology 1999 , 17 ( 10 ), 2169 – 2181 . [CSA]
   Web of Science ®Google Scholar
• Zielinski , J.M. ; Duda , J.L. Predicting polymer/solvent diffusion coefficients using free-volume theory . AIChE Journal 1992 , 38 ( 3 ), 405 – 415 . [CSA] [CROSSREF]
   Web of Science ®Google Scholar
• Komoda , T. ; Yokoyama , T. ; Kobayashi , M. ; Jing , C. ; Tsukada , T. ; Hozawa , M. Full finite element analyses for leveling of a polymer/solvent film accompanying with drying shrinkage . Journal of Chemical Engineering of Japan 2003 , 36 ( 6 ), 668 – 675 . [CSA] [CROSSREF]
   Web of Science ®Google Scholar
• Yamamura , M. ; Nishio , T. ; Kajiwara , T. ; Adachi , K. Effect of stepwise change of drying rate on microstructure evolution in polymer films . Drying Technology 2001 , 19 ( 7 ), 1397 – 1410 . [CSA] [CROSSREF]
   Web of Science ®Google Scholar
• Kure , K. ; Sagara , Y. ; Seo , Y. ; Morishima , H. Characteristic color change and its prediction for the surface of white bread during baking processes . Journal of the Japanese Society for Food Science and Technology 1997 , 44 ( 1 ), 31 – 37 . [CSA]
   Web of Science ®Google Scholar
• Konishi , Y. ; Horiuchi , J. ; Kobayashi , M. Dynamic evaluation of the dehydration response curves of foods characterized by a poulice-up process using a fish-paste sausage . I. Determination of the mechanisms for moisture transfer. Drying Technology 2001 , 19 ( 7 ), 1253 – 1269 . [CSA]
   Web of Science ®Google Scholar
• Inazu , T. ; Iwasaki , K. ; Furuta , T. Desorption isotherms for Japanese noodle (udon) . Drying Technology 2001 , 19 ( 7 ), 1375 – 1384 . [CSA] [CROSSREF]
   Web of Science ®Google Scholar
• Yamamoto , S. A short-cut method for determining concentration dependent diffusivity in liquid foods and polymer solutions from regular regime drying curves . Drying Technology 2001 , 19 ( 7 ), 1479 – 1490 . [CSA] [CROSSREF]
   Web of Science ®Google Scholar
• Yang , H. ; Sakai , N. ; Watanabe , M. Drying model with non-isotropic shrinkage deformation undergoing simultaneous heat and mass transfer . Drying Technology 2001 , 19 ( 7 ), 1441 – 1460 . [CSA] [CROSSREF]
   Web of Science ®Google Scholar
• Kobayashi , N. ; Sato , T. ; Itaya , Y. ; Mori , S. Pulverization technique of ligneous biomass and its effective utilization , Proceedings of IT3'04 Conference , May 10–14, 2004 , Phoenix , Arizona .
   Google Scholar
• Itaya , Y. ; Mabuchi , S. ; Hasatani , M. Deformation behavior of ceramic slabs by nonuniform drying . Drying Technology 1995 , 13 ( 3 ), 801 – 819 . [CSA]
   Web of Science ®Google Scholar
• Itaya , Y. ; Taniguchi , S. ; Hasatani , M. A numerical study of transient deformation and stress behavior of a clay slab during drying . Drying Technology 1997 , 15 ( 1 ), 1 – 21 . [CSA]
   Web of Science ®Google Scholar
• Itaya , Y. ; Mori , S. ; Hasatani , M. Effect of intermittent heating on drying-induced strain-stress of molded clay . Drying Technology 1999 , 17 ( 7&8 ), 1261 – 1271 . [CSA]
   Web of Science ®Google Scholar
• Gong , Z.X. ; Mujumdar , A.S. ; Itaya , Y. ; Mori , S. ; Hasatani , M. Drying of clay and nonclay media . Heat and mass transfer and quality aspects. Drying Technology 1998 , 16 ( 6 ), 1119 – 1152 . [CSA]
   Google Scholar
• Liu , X.D. ; Atarashi , T. ; Furuta , T. ; Yoshii , H. ; Aishima , S. ; Ohkawara , M. ; Linko , P. Microencapsulation of emulsified hydrophobic flavors by spray drying . Drying Technology 2001 , 19 ( 7 ), 1361 – 1374 . [CSA] [CROSSREF]
   Web of Science ®Google Scholar
• Liu , X.D. ; Furuta , T. ; Yoshii , H. ; Linko , P. Retention of emulsified flavor in a single droplet during drying . Food Science Technology Research 2000 , 6 , 335 – 339 . [CSA]
   Google Scholar
• Shiga , H. ; Yoshii , H. ; Nishiyama , T. ; Furuta , T. ; Forssele , P. ; Poutanen , K. ; Linko , P. Flavor encapsulation and release characteristics of spray-dried powder by the blended encapsulant of cyclodextrin and gum arabic . Drying Technology 2001 , 19 , 1385 – 1395 . [CSA] [CROSSREF]
   Web of Science ®Google Scholar
• Tabata , K. Fluid bed granulating dryer for liquids . Powder and Industry 2004 , 36 ( 2 ), 43 – 50 . [CSA]
   Google Scholar
• Sagara , Y. Structural models related to transport properties for the dried layer of food materials undergoing freeze-drying . Drying Technology 2001 , 19 ( 2 ), 281 – 296 . [CSA] [CROSSREF]
   Web of Science ®Google Scholar
• Sagara , Y. Advances in transport phenomena during freeze-drying of food materials—fundamentals and applications . Food Science Technology Research 2001 , 7 ( 3 ), 183 – 190 . [CSA]
   Google Scholar
• Tatemoto , Y. ; Mawatari , Y. ; Saito , K. ; Noda , K. Effect of motion of drying materials in fluidized bed on drying characteristics. Journal of Chemical Engineering of Japan 2002, 35 (8), 753–758. [CSA] [CROSSREF]
   Web of Science ®Google Scholar
• Tatemoto , Y. ; Mawatari , Y. ; Sugita , K. ; Shiota , Y. ; Noda , K. The mechanism of a temperature decrement of porous materials immersed in a fluidized bed in drying . Journal of Chemical Engineering of Japan 2004 , 37 ( 7 ), 875 – 881 . [CSA] [CROSSREF]
   Web of Science ®Google Scholar
• Kawai , S. Future trend of dryer technology . Advances in Drying Engineering ; Recent Chemical Engineering 52 , Kagaku Kogyosha : Tokyo , 2000 ; 93 – 103 .
   Google Scholar
• Kojima , S. ICH Guideline for Residual Solvents in Drugs . Pharm Tech Japan 2000 , 16 ( 5 ), 687 – 704 . [CSA]
   Google Scholar
• Mizutani , E. Practical examples of dryers employing vibration technology . Chemical Engineering 2002 , 66 ( 7 ), 421 – 423 ( in Japanese ). [CSA]
   Google Scholar
• Tanaka , R. ; Kiuchi , T. ; Furuhata , T. ; Kobayashi , N. ; Itaya , Y. ; Katagiri , H. ; Mori , S. Optimization of recycling of a pole transformer by vacuum heating separation . Kagaku Kogaku Ronbunshu 2004 , 30 ( 4 ), 425 – 431 . [CSA] [CROSSREF]
   Web of Science ®Google Scholar
• Tanaka , R. ; Kobayashi , N. ; Itaya , Y. ; Mori , S. ; Tachi , Y. ; Hayashi , Y. ; Mizutani , E. Removal of insulation oil from a pole transformer by vacuum heating separation using a vibration dryer . Kagaku Kogaku Ronbunshu 2004 , 30 ( 4 ), 440 – 446 . [CSA] [CROSSREF]
   Web of Science ®Google Scholar
• Tanaka , R. ; Kobayashi , N. ; Itaya , Y. ; Mori , S. ; Mizutani , E. Removal of PCBs by vacuum heating separation: Removal process of PCBs by vacuum heating separation using a vibration dryer . Kagaku Kogaku Ronbunshu 2004 , 30 ( 5 ), 679 – 684 . [CSA] [CROSSREF]
   Web of Science ®Google Scholar
• Iyota , H. ; Nishimura , N. ; Yoshida , M. ; Nomura , T. Simulation of superheated steam drying considering initial steam condensation . Drying Technology 2001 , 19 ( 7 ), 1425 – 1440 . [CSA] [CROSSREF]
   Web of Science ®Google Scholar
• Tatemoto , Y. ; Bando , Y. ; Oyama , K. ; Yasuda , K. ; Nakamura , M. ; Sugiyama , Y. ; Shibata , M. Effect of operational conditions on drying characteristics in closed superheated steam drying . Drying Technology 2001 , 19 ( 7 ), 1287 – 1303 . [CSA] [CROSSREF]
   Web of Science ®Google Scholar
• Iyota , H. ; Nishimura , N. ; Onuma , T. ; Nomura , T. Drying of sliced raw potatoes in superheated steam and hot air . Drying Technology 2001 , 19 ( 7 ), 1411 – 1424 . [CSA] [CROSSREF]
   Web of Science ®Google Scholar
• Itaya , Y. ; Uchiyama , S. ; Hatano , S. ; Mori , S. Drying enhancement of clay slab by microwave heating . Proc. of the 14th International Drying Symposium ; Silva , M.A. , Rocha , R.C.S. , Eds.; Sao Paulo , Brazil , 22–25 August 2004 ; 193 – 200 .
   Google Scholar
• Imakoma , H. ; Kawamura , K. ; Kubo , K. ; Ohmura , N. Control of polymer content profile within dried porous material wetted with aqueous polymer solution by sequential drying with microwave and convection . Kagaku Kogaku Ronbunshu 2004 , 30 ( 1 ), 91 – 94 . [CSA] [CROSSREF]
   Web of Science ®Google Scholar