Publication Cover
Drying Technology
An International Journal
Volume 28, 2010 - Issue 6
155
Views
8
CrossRef citations to date
0
Altmetric
Original Articles

Modeling Shrinkage Response to Tensile Stresses in Wood Drying III. Stress—Tensile Set Correlation in Short Pieces of Lumber

, &
Pages 745-751 | Published online: 27 May 2010

REFERENCES

  • Peck , E.C. A new approach to the formulation of hardwood dry-kiln schedules . Southern Lumberman 1940 , 161 ( 2033 ), 136 – 137 .
  • Kuebler , H. Drying stresses and stress relief in thin sections of wood. Forest Products Laboratory Report No. 2164, 1960, Madison, WI, US Department of Agriculture Forest Service.
  • Fuller , J. Influence of drying/conditioning schedules on stress development, relief and prong test . Drying Technology 1999 , 17 ( 10 ), 2237 – 2249 .
  • Kang , H. ; Muszynski , L. ; Milota , M. Full-field optical measurement of deformations in early stages of drying Oregon white oak and Western hemlock lumber . Proceedings of the 10th International IUFRO Wood Drying Conference , Orono , Maine , August 26–30, 2007 ; 38 – 43 .
  • Allegretti , O. ; Ferrari , S. ; Travan , L. A sensor for the direct measurement of internal stress in wood during drying: Experimental test towards the industrial application . Proceedings of the 10th International IUFRO Wood Drying Conference , Orono , Maine , August 26–30, 2007 ; 50 – 54 .
  • Fuller , J. Determining the source of changing shrinkage rates during kiln drying . Drying Technology 2000 , 18 ( 1 ), 261 – 278 .
  • Fuller , J. Additional sources of changing shrinkage rates during kiln drying . Drying Technology 2000 , 18 ( 4 ), 1023 – 1031 .
  • Fuller , J. Material response-based kiln control system . Drying Technology 2000 , 18 ( 6 ), 1349 – 1359 .
  • Lazarescu , C. ; Avramidis , S. ; Oliveira , L. Modeling shrinkage response to tensile stresses in wood drying, I. Shrinkage-moisture interaction in stress free specimens . Drying Technology 2009 , 27 ( 11 ), 1183 – 1191 .
  • Lazarescu , C. ; Avramidis , S. ; Oliveira , L. Modeling shrinkage response to tensile stresses in wood drying II. Stress-shrinkage correlation in restrained specimens . Drying Technology 2009 , 28 ( 2 ), 186 – 192 .
  • Lazarescu , C. ; Avramidis , S. Drying related strain development in restrained wood . Drying Technology 2008 , 26 ( 5 ), 544 – 551 .
  • Wu , Q. Rheological Behavior of Douglas-Fir as Related to the Process of Drying; Ph.D. thesis, Oregon State University, Corvallis, Oregon, USA, 1993 .
  • Rosenkilde , A. ; Gorce , J.-P. ; Barry , A. Measurement of moisture content profiles during drying of Scots pine using magnetic resonance imaging. Holzforschung 2004, 58 (2), 138–142.
  • Tremblay , C. ; Cloutier , A. ; Fortin , Y. Experimental determination of the convective heat and mass transfer coefficients for wood drying . Wood Science and Technology 2000 , 34 ( 3 ), 253 – 276 .
  • Wilberg , P. , Sehlstedt , P.S.M.B. ; Moren , T.J. Heat and mass transfer during sapwood drying above the fibre saturation point . Drying Technology 2000 , 18 ( 8 ), 1647 – 1664 .
  • Rosenkilde , A. Moisture Content Profiles and Surface Phenomena during Drying of Wood; Ph.D. thesis, Kungliga Tekniska Hogskolan, Stockholm, 2002.
  • Salin , J.G. Drying of liquid water in wood as influenced by the capillary fiber network . Drying Technology 2008 , 26 ( 5 ), 560 – 567 .
  • Rosenkilde , A. ; Glover , P. High resolution measurement of the surface layer moisture content during drying of wood using a novel magnetic resonance imaging technique . Holzforschung 2002 , 56 ( 3 ), 312 – 317 .
  • Espenas , L.D. Shrinkage of Douglas-fir, Western hemlock, and Red Alder as affected by drying conditions . Forest Products Journal 1971 , 21 ( 6 ), 44 – 46 .
  • McMillen , J.M. Stresses in wood during drying. Revised Forest Products Laboratory Report No. 1652, 1958, Madison, WI, US Department of Agriculture Forest Service.
  • Treybal , R.E. Mass-Transfer Operations ; McGraw-Hill : New York , 1980 .
  • Stamm , A.J. ; Loughborough , W.K. Variation in shrinking and swelling of wood . Transactions of the American Society of Mechanical Engineers 1942 , 64 , 379 – 386 .
  • Resch , H. ; Kang , H. ; Hoag , M.L. Drying Douglas-fir lumber: A computer simulation . Wood and Fiber Science 1989 , 21 ( 3 ), 207 – 218 .
  • Irvine , G.M. The significance of the glass transition of lignin in thermomechanical pulping . Wood Science and Technology 1985 , 19 ( 3 ), 139 – 149 .
  • Kelley , S.S. ; Timothy , G.R. ; Glasser , W.G. Relaxation behaviour of the amorphous components of wood . Journal of Materials Science 1987 , 22 ( 2 ), 617 – 624 .
  • Nakano , T. Analysis of the temperature dependence of water sorption for wood on the basis of dual mode theory . Journal of Wood Science 2006 , 52 ( 3 ), 490 – 495 .
  • Goring , D.A. Thermal softening of lignin, hemicellulose and cellulose . Pulp and Paper Magazine 1963 , 64 ( 12 ), 517 – 527 .
  • Salmen , L. Viscoelastic properties of in situ lignin under water-saturated conditions . Journal of Materials Science 1984 , 19 ( 9 ), 3090 – 3096 .
  • Rémond , R. ; Perré , P. Drying strategies capable of reducing the stress level of a stack of boards as defined by a comprehensive dual scale model . Maderas Ciencia y Tecnología 2008 , 10 ( 1 ), 3 – 18 .
  • McCurdy , M.C. ; Keey , R.B. Influence of sawing orientation on moisture movement through softwood boards . Maderas Ciencia y Tecnología 2002 , 4 ( 1 ), 26 – 39 .
  • Pang , S. ; Haslett , A.N. Effects of sawing pattern on drying rate and residual drying stresses of Pinus radiata lumber . Maderas Ciencia y Tecnología 2002 , 4 ( 1 ), 40 – 49 .
  • Stohr , H.P. Shrinkage differential as a measure for drying stress determination . Wood Science and Technology 1988 , 22 ( 2 ), 121 – 128 .

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.