Publication Cover
Drying Technology
An International Journal
Volume 30, 2012 - Issue 6
296
Views
20
CrossRef citations to date
0
Altmetric
Original Articles

Drying Kinetics of Oil Palm Frond Particles in an Agitated Fluidized Bed Dryer

, , &
Pages 619-630 | Published online: 27 Mar 2012

REFERENCES

  • Department of Statistics Malaysia. Report on the Census of Agricultural Establishments 2009—Summary Findings. http://www.statistics.gov.my/portal/images/stories/files/LatestReleases/agricultural/Ringkasan_Penemuan_2009_TANAMAN.pdf (accessed March 3, 2011)
  • Kelly-Yong , T.L. ; Lee , K.T. ; Mohamed , A.R. ; Bhatia , S. Potential of hydrogen from oil palm biomass as a source of renewable energy worldwide . Energy Policy 2007 , 35 , 5692 – 5701 .
  • Cardona , C.A. ; Sanchez , O.J. Fuel ethanol production: Process design, trends and integration opportunities . Bioresource Technology 2007 , 98 , 2415 – 2457 .
  • Thiam , L.C. ; Bhatia , S. Catalytic processes towards the production of biofuels in a palm oil and oil palm biomass–based biorefinery . Bioresource Technology 2008 , 99 , 7911 – 7922 .
  • Goh , C.S. ; Lee , K.T. Palm-based biofuel refinery (PBR) to substitute petroleum refinery: An energy and emergy assessment . Renewable and Sustainable Energy Reviews 2010 , 14 , 2986 – 2995 .
  • Goh , C.S. ; Tan , H.T. ; Lee , K.T. ; Bhatia , S. Bio-ethanol from lignocelluloses: Status, perspectives and challenges in Malaysia . Bioresource Technology 2010 , 101 , 4834 – 4841 .
  • Goh , C.S. ; Lee , K.T. ; Bhatia , S. Hot compressed water pretreatment of oil palm fronds to enhance glucose recovery for production of second generation bio-ethanol . Bioresource Technology 2010 , 101 , 7362 – 7367 .
  • Goh , C.S. ; Tan , H.T. ; Lee , K.T. ; Mohamed , A.R. Optimizing ethanolic hot compressed water (EHCW) cooking as a pretreatment to glucose recovery for the production of fuel ethanol from oil palm frond (OPF) . Fuel Processing Technology 2010 , 91 , 1146 – 1151 .
  • Hui , T.T. ; Keat , T.L. ; Mohamed , A.R. Pretreatment of lignocellulosic palm biomass using a solvent–ionic liquid [BMIM]Cl for glucose recovery: An optimisation study using response surface methodology . Carbohydrate Polymers 2011 , 83 , 1862 – 1868 .
  • Wan Rosli , W.D. ; Law , K.N. ; Zainuddin , Z. ; Asro , R. Effect of pulping variables on the characteristics of oil palm frond fiber . Bioresource Technology 2004 , 93 , 233 – 240 .
  • Laemsak , N. ; Okuma , M. Development of boards made from oil palm frond II: Properties of binderless boards from steam-exploded fibers of oil palm frond . Journal of Wood Science 2000 , 46 , 322 – 326 .
  • Hashim , R. ; Wan Nadhari , W.N.A. ; Sulaiman , O. ; Kawamura , F. ; Hiziroglu , S. ; Sato , M. ; Sugimoto , T. ; Seng , T.G. ; Tanaka , R. Characterization of raw materials and manufactured binderless particleboard from oil palm biomass . Materials and Design 2011 , 32 , 246 – 254 .
  • Sulaiman , F. ; Abdullah , N. ; Gerhauser , H. ; Shariff , A. An outlook of Malaysian energy, oil palm industry and its utilization of wastes as useful resources . Biomass and Bioenergy 2011 , 35 , 3775 – 3786 .
  • Sabiha-Hanim , S. ; Mohd Norr , M.A. ; Rosma , A. Effect of autohydrolysis and enzymatic treatment on oil palm (ElaeisguineensisJacq.) frond fibres for xylose and xylooligosaccharides production . Bioresource Technology 2011 , 102 , 1234 – 1239 .
  • Hassim , H.A. ; Lourenco , M. ; Goel , G. ; Vlaeminck , B. ; Goh , Y.M. ; Fievez , V. Effect of different inclusion levels of oil palm fronds on in vitro rumen fermentation pattern, fatty acid metabolism and apparent biohydrogenation of linoleic and linolenic acid . Animal Feed Science and Technology 2010 , 162 , 155 – 158 .
  • Rahman , M.M. ; Lourenco , M. ; Hassim , H.A. ; Baars , J.J.P. ; Sonnenberg , A.S.M. ; Cone , J.W. ; De Boever , J. ; Fievez , V. Improving ruminal degradability of oil palm fronds using white rot fungi . Animal Feed Science and Technology 2011 , 169 , 157 – 166 .
  • Supranto ; Daud , W.R.W. ; Sopian , K. ; Othman , M.Y. ; Yatim , B. Drying curves of oil palm fronds. In Proceedings of First Asian–Australian Drying Conference (ADC'99), Bali, Indonesia, October 24–27, 1999; 281–289.
  • Kunii , D. ; Levenspiel , O. Fluidization Engineering ; Butterworth-Heinemann : Boston , 1991 .
  • Tasirin , S.M. ; Anwar , N. Fluidization behavior of vibrated and aerated bed of starch powders . Journal of Chemical Engineering of Japan 2001 , 34 ( 10 ), 1251 – 1257 .
  • Law , C.L. ; Mujumdar , A.S. Fluidized bed dryers . In Handbook of Industrial Drying ; Mujumdar , A.S. , Ed.; CRC Press : New York 2006 ; 173 – 200 .
  • Daud , W.R.W. Fluidized bed dryers—Recent advances . Advanced Powder Technology 2008 , 19 , 403 – 418 .
  • Watano , S. ; Yeh , N. ; Miyanami , K. Drying of granules in agitation fluidized bed . Journal of Chemical Engineering of Japan 1998 , 31 ( 6 ), 908 – 913 .
  • Adamiec , J. Drying of waste sludge in a fluidized bed dryer with a mixer . Drying Technology 2002 , 20 ( 4&5 ), 839 – 853 .
  • Reyes , A. ; Eckholt , M. ; Alvarez , P.I. Drying and heat transfer characteristics for a novel fluidized bed dryer . Drying Technology 2004 , 22 ( 8 ), 1869 – 1895 .
  • Reyes , A. ; Diaz , G. ; Marquardt , F.-H. Analysis of mechanically agitated fluid–particle contact dryers . Drying Technology 2001 , 19 ( 9 ), 2235 – 2259 .
  • Moreno , R. ; Antolin , G. ; Reyes , A. Quality of fluidization for the drying of forestry biomass particles in a fluidized bed . Biosystem Engineering 2006 , 94 ( 1 ), 47 – 56 .
  • Roy , R.K. Design of Experiments Using the Taguchi Approach: 16 Steps to Product and Process Improvement ; John Wiley & Sons : New York , 2001 .
  • Keey , R.B. Introduction to Industrial Drying Operations ; Pergamon : Oxford , 1978 .
  • Keey , R.B. Drying of Loose and Particulate Materials ; Hemisphere : New York , 1992 .
  • van Meel , D.A. Adiabatic convection batch drying with recirculation of air . Chemical Engineering Science 1958 , 9 , 36 – 44 .
  • Kemp , I.C. ; Fyhr , B.C. ; Laurent , S. ; Roques , M.A. ; Groenewold , C.E. ; Tsotsas , E. ; Sereno , A.A. ; Bonazzi , C.B. ; Bimbenet , J.-J. ; Kind , M. Methods for processing experimental drying kinetics data. Drying Technology 2001, 19(1), 15–34.
  • Daud , W.R.W. A crossflow model for continuous plug flow fluidized bed crossflow dryers . Drying Technology 2007 , 25 ( 7–8 ), 1229 – 1235 .
  • Page , G.E. Factors influencing the maximum rates of air drying shelled corn in thin layers. M.S. Thesis, Department of Mechanical Engineering, Purdue University, West Lafayette, IN, 1949.
  • Kudra , T. ; Efremov , G.I. A quasi-stationary approach to drying kinetics of fluidized particulate materials . Drying Technology 2003 , 21 ( 6 ), 1077 – 1090 .
  • Montgomery , D.C. , Jennings , C.L. , Kulahci , M. Introduction to Time Series Analysis and Forecasting ; John Wiley & Sons : Hoboken , NJ , 2008 .
  • Reyes , A. ; Alvarez , P.I. ; Marquardt , F.H. Drying of carrots in a fluidized bed, I: Effects of drying conditions and modeling . Drying Technology 2002 , 20 ( 7 ), 1463 – 1483 .
  • Lekhal , A. ; Girard , K.P. ; Brown , M.A. ; Kiang , S. ; Khinast , J.G. ; Glasser , B.J. The effect of agitated drying on the morphology of L-threonine (needle-like) crystals . International Journal of Pharmaceuticals 2004 , 270 , 263 – 277 .
  • Malhotra , K. ; Mujumdar , A.S. Particle flow and contact heat transfer characteristics of stirred granular bed . Drying Technology 1992 , 10 , 51 – 80 .
  • Dittler , A. ; Bamberger , T. ; Gehrmann , D. ; Schluner , E.U. Measurement and simulation of the vacuum contact drying of pastes in a LIST-type kneader drier . Chemical Engineering and Processing 1997 , 36 , 301 – 308 .
  • Deng , W.Y. ; Yan , J.H. ; Li , X.D. ; Wang , F. ; Lu , S.Y. ; Chi , Y. ; Cen , K.F. Measurement and simulation of the contact drying of sewage sludge in a Nara-type paddle dryer . Chemical Engineering Science 2009 , 64 , 5117 – 5124 .
  • Wuttipalakorn , P. ; Srichumpuang , W. ; Chiewchan , N. Effects of pretreatment and drying on composition and bitterness of high-dietary-fiber powder from lime residues . Drying Technology 2009 , 27 , 133 – 142 .

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.