Freeze-Drying Monitoring Using a New Process Analytical Technology: Toward a “Zero Defect” Process

REFERENCES

• Mellor , J.D. Fundamentals of Freeze-Drying ; Academic Press : London , 1978 .
   Google Scholar
• Liapis , A.I. ; Pikal , M.J. ; Bruttini , R. Research and development needs and opportunities in freeze drying . Drying Technology 1996 , 14 , 1265 – 1300 .
   Web of Science ®Google Scholar
• Jennings , T.A. Lyophilization: Introduction and Basic Principles ; Interpharm/CRC Press : Boca Raton , FL , 1999 .
   Google Scholar
• Oetjen , G.W. Freeze-Drying ; Wiley-VCH : Weinheim , Germany , 1999 .
   Google Scholar
• Oetjen , G.W. ; Haseley , P. Freeze-Drying, , 2nd ed. ; Wiley-VHC : Weinheim , Germany , 2004 .
   Google Scholar
• Sadikoglu , H. ; Ozdemir , M. ; Seker , M. Freeze-drying of pharmaceutical products: Research and development needs . Drying Technology 2006 , 24 , 849 – 861 .
   Web of Science ®Google Scholar
• Franks , F. Freeze-Drying of Pharmaceuticals and Biopharmaceuticals ; Royal Society of Chemistry : Cambridge , UK , 2007 .
   Google Scholar
• U.S. Department of Health and Human Services, Food and Drug Administration. Guidance for Industry PAT—A Framework for Innovative Pharmaceutical Manufacturing & Quality Assurance. http://www.fda.gov/downloads/Drugs/GuidanceComplianceRegulatoryInformation/Guidances/UCM070305.pdf
   Google Scholar
• Pikal , M.J. Freeze-drying of proteins: Process, formulation, and stability. ACS Symposium Series 1994, 567, 120–133.
   Google Scholar
• Franks , F. Freeze-drying of bioproducts: Putting principles into practice . European Journal of Pharmaceutics and Biopharmaceutics 1998 , 4 , 221 – 229 .
   Web of Science ®Google Scholar
• Bellows , R.J. ; King , C.J. Freeze-drying of aqueous solutions: Maximum allowable operating temperature . Cryobiology 1972 , 9 , 559 – 561 .
   PubMed Web of Science ®Google Scholar
• Tsourouflis , S. ; Flink , J.M. ; Karel , M. Loss of structure in freeze-dried carbohydrates solutions: Effect of temperature, moisture content and composition . Journal of the Science of Food and Agriculture 1976 , 27 , 509 – 519 .
   Web of Science ®Google Scholar
• Adams , G.D.J. ; Irons , L.I. Some implications of structural collapse during freeze-drying using Erwinia caratovora L-asparaginase as a model . Journal of Chemical Technology and Biotechnology 1993 , 58 , 71 – 76 .
   PubMed Web of Science ®Google Scholar
• Wang , D.Q. ; Hey , J.M. ; Nail , S.L. Effect of collapse on the stability of freeze-dried recombinant factor VIII and α-amylase . Journal of Pharmaceutical Sciences 2004 , 93 , 1253 – 1263 .
   PubMed Web of Science ®Google Scholar
• Barresi , A.A. ; Ghio , S. ; Fissore , D. ; Pisano , R. Freeze drying of pharmaceutical excipients close to collapse temperature: Influence of the process conditions on process time and product quality . Drying Technology 2009 , 27 , 805 – 816 .
   Web of Science ®Google Scholar
• Pikal , M.J. Use of laboratory data in freeze drying process design: Heat and mass transfer coefficients and the computer simulation of freeze drying . Journal of Parenteral Science and Technology 1985 , 39 , 115 – 139 .
   PubMedGoogle Scholar
• Sadikoglu , H. ; Liapis , A.I. Mathematical modelling of the primary and secondary drying stages of bulk solution freeze-drying in trays: Parameter estimation and model discrimination by comparison of theoretical results with experimental data . Drying Technology 1997 , 15 , 791 – 810 .
   Web of Science ®Google Scholar
• Hottot , A. ; Vessot , S. ; Andrieu , J. Determination of mass and heat transfer parameters during freeze-drying cycles of pharmaceutical products . PDA Journal of Pharmaceutical Science and Technology 2005 , 59 , 138 – 153 .
   PubMedGoogle Scholar
• Gan , K.H. ; Crosser , O.K. ; Liapis , A.I. ; Bruttini , R. Lyophilisation in vials on trays: Effects of tray side . Drying Technology 2005 , 23 , 341 – 363 .
   Web of Science ®Google Scholar
• Hottot , A. ; Peczalski , R. ; Vessot , S. ; Andrieu , J. Freeze-drying of pharmaceutical proteins in vials: Modeling of freezing and sublimation steps . Drying Technology 2006 , 24 , 561 – 570 .
   Web of Science ®Google Scholar
• Velardi , S.A. ; Barresi , A.A. Development of simplified models for the freeze-drying process and investigation of the optimal operating conditions . Chemical Engineering Research and Design 2008 , 87 , 9 – 22 .
   Web of Science ®Google Scholar
• Sundaram , J. ; Shay , Y.H.M. ; Hsu , C.C. ; Sane , S.U. Design space development for lyophilization using DOE and process modeling . BioPharm International 2010 , 23 , 26 – 36 .
   Web of Science ®Google Scholar
• Giordano , A. ; Barresi , A.A. ; Fissore , D. On the use of mathematical models to build the design space for the primary drying phase of a pharmaceutical lyophilization process . Journal of Pharmaceutical Sciences 2011 , 100 , 311 – 324 .
   PubMed Web of Science ®Google Scholar
• Koganti , V.R. ; Shalaev , E.Y. ; Berry , M.R. ; Osterberg , T. ; Youssef , M. ; Hiebert , D.N. ; Kanka , F.A. ; Nolan , M. ; Barrett , R. ; Scalzo , G. ; Fitzpatrick , G. ; Fitzgibbon , N. ; Luthra , S. ; Zhang , L. Investigation of design space for freeze-drying: Use of modeling for primary drying segment of a freeze-drying cycle . AAPS PharmSciTech 2011 , 12 , 854 – 861 .
   PubMed Web of Science ®Google Scholar
• Fissore , D. ; Pisano , R. ; Barresi , A.A. Advanced approach to build the design space for the primary drying of a pharmaceutical freeze-drying process . Journal of Pharmaceutical Sciences 2011 , 100 , 4922 – 4933 .
   PubMed Web of Science ®Google Scholar
• Pisano , R. ; Fissore , D. ; Barresi , A.A. ; Brayard , P. ; Chouvenc , P. ; Woinet , B. Quality by Design: optimization of a freeze-drying cycle via design space in case of heterogeneous drying behavior and influence of the freezing protocol . Pharmaceutical Development and Technology 2013 , 18 , 280 – 295 .
   PubMed Web of Science ®Google Scholar
• Milton , N. ; Pikal , M.J. ; Roy , M.L. ; Nail , S.L. Evaluation of manometric temperature measurement as a method of monitoring product temperature during lyophilisation . PDA Journal of Pharmaceutical Science and Technology 1997 , 5 , 7 – 16 .
   Google Scholar
• Liapis , A.I. ; Sadikoglu , H. Dynamic pressure rise in the drying chamber as a remote sensing method for monitoring the temperature of the product during the primary drying stage of freeze-drying . Drying Technology 1998 , 16 , 1153 – 1171 .
   Web of Science ®Google Scholar
• Chouvenc , P. ; Vessot , S. ; Andrieu , J. ; Vacus , P. Optimization of the freeze-drying cycle: A new model for pressure rise analysis . Drying Technology 2004 , 22 , 1577 – 1601 .
   Web of Science ®Google Scholar
• Velardi , S.A. ; Rasetto , V. ; Barresi , A.A. Dynamic parameters estimation method: Advanced manometric temperature measurement approach for freeze-drying monitoring of pharmaceutical . Industrial & Engineering Chemistry Research 2008 , 47 , 8445 – 8457 .
   Web of Science ®Google Scholar
• Pisano , R. ; Fissore , D. ; Barresi , A.A. Innovation in monitoring food freeze-drying . Drying Technology 2011 , 29 , 1920 – 1931 .
   Web of Science ®Google Scholar
• Fissore , D. ; Pisano , R. ; Barresi , A.A. On the methods based on the pressure rise test for monitoring a freeze-drying process . Drying Technology 2011 , 29 , 73 – 90 .
   Web of Science ®Google Scholar
• Gieseler , H. ; Kessler , W.J. ; Finson , M. ; Davis , S.J. ; Mulhall , P.A. ; Bons , V. ; Debo , D.J. ; Pikal , M.J. Evaluation of tunable diode laser absorption spectroscopy for in-process water vapor mass flux measurement during freeze drying . Journal of Pharmaceutical Sciences 2007 , 96 , 1776 – 1793 .
   PubMed Web of Science ®Google Scholar
• Kuu , W.Y. ; Nail , S.L. ; Sacha , G. Rapid determination of vial heat transfer parameters using tunable diode laser absorption spectroscopy (TDLAS) in response to step-changes in pressure set-point during freeze-drying . Journal of Pharmaceutical Sciences 2009 , 98 , 1136 – 1154 .
   PubMed Web of Science ®Google Scholar
• Kuu , W.Y. ; O'Bryan , K.R. ; Hardwick , L.M. ; Paul , T.W. Product mass transfer resistance directly determined during freeze-drying cycle runs using tunable diode laser absorption spectroscopy (TDLAS) and pore diffusion model . Pharmaceutical Development and Technology 2011 , 16 , 343 – 357 .
   PubMed Web of Science ®Google Scholar
• Gan , K.H. ; Crosser , O.K. ; Liapis , A.I. ; Bruttini , R. Lyophilisation in vials on trays: Effects of tray side . Drying Technology 2005 , 23 , 341 – 363 .
   Web of Science ®Google Scholar
• Rasetto , V. ; Marchisio , D.L. ; Fissore , D. ; Barresi , A.A. On the use of a dual-scale model to improve understanding of a pharmaceutical freeze-drying process . Journal of Pharmaceutical Sciences 2010 , 99 , 4337 – 4350 .
   PubMed Web of Science ®Google Scholar
• Barresi , A.A. ; Pisano , R. ; Rasetto , V. ; Fissore , D. ; Marchisio , D.L. Model-based monitoring and control of industrial freeze-drying processes: Effect of batch non-uniformity . Drying Technology 2010 , 28 , 577 – 590 .
   Web of Science ®Google Scholar
• Pisano , R. ; Fissore , D. ; Barresi , A.A. Heat transfer in freeze-drying apparatus . In Developments in Heat Transfer—Book 1 ; dos Santos Bernardes , M.A. , Ed.; InTech-Open Access Publisher : Rijeka , Croatia , 2011 ; 91 – 114 .
   Google Scholar
• Vallan , A. ; Corbellini , S. ; Parvis , M. A Plug&Play architecture for low-power measurement systems. In Proceedings of Instrumentation and Measurement Technology Conference—IMTC 2005, Ottawa, ON, Canada, May 17–19; IEEE: Piscataway, NJ, 2005; 565–569.
   Google Scholar
• Schneid , S. ; Gieseler , H. Evaluation of a new wireless temperature remote interrogation system (TEMPRIS) to measure product temperature during freeze-drying . AAPS PharmSciTech 2008 , 9 , 729 – 739 .
   PubMed Web of Science ®Google Scholar
• Corbellini , S. ; Parvis , M. ; Vallan , A. A low-invasive system for local temperature mapping in large freeze dryers. In Proceedings of Instrumentation and Measurement Technology Conference–I2MTC 2009, Singapore, May 5–7; IEEE: Piscataway, NJ, 2009; 80–85.
   Google Scholar
• Corbellini , S. ; Parvis , M. ; Vallan , A. In-process temperature mapping system for industrial freeze-dryers. IEEE Transactions on Instrumentation and Measurement 2010, 59, 1134–1140.
   Web of Science ®Google Scholar
• Hottot , A. ; Vessot , S. ; Andrieu , J.A direct characterization method of the ice morphology. Relationship between mean crystals size and primary drying times of freeze-drying processes . Drying Technology 2004 , 22 , 2009 – 2021 .
   Web of Science ®Google Scholar
• Nakagawa , K. ; Hottot , A. ; Vessot , S. ; Andrieu , J. Modeling of freezing step during freeze-drying of drugs in vials . AIChE Journal 2007 , 53 , 1362 – 1372 .
   Web of Science ®Google Scholar
• Barresi , A.A. ; Pisano , R. ; Fissore , D. ; Rasetto , V. ; Velardi , S.A. ; Vallan , A. ; Parvis , M. ; Galan , M. Monitoring of the primary drying of a lyophilization process in vials . Chemical Engineering and Processing 2009 , 48 , 408 – 423 .
   Web of Science ®Google Scholar
• Rambhatla , S. ; Ramot , R. ; Bhugra , C. ; Pikal , M.J. Heat and mass transfer scale-up issues during freeze drying: II. Control and characterization of the degree of super cooling . AAPS PharmSciTech 2004 , 5 , Art. 58.
   PubMed Web of Science ®Google Scholar
• Morris , J. ; Morris , G.J. ; Taylor , R. ; Zhai , S. ; Slater , N.K.H. The effect of controlled nucleation on ice structure, drying rate and protein recovery in vials in a modified freeze dryer . Cryobiology 2004 , 49 , 308 – 309 .
   Google Scholar
• Nakagawa , K. ; Vessot , S. ; Hottot , A. ; Andrieu , J. Influence of controlled nucleation by ultrasounds one ice morphology of frozen formulations for pharmaceutical proteins freeze-drying . Chemical Engineering and Processing 2006 , 45 , 783 – 791 .
   Web of Science ®Google Scholar
• Patel , S.M. ; Bhugra , C. ; Pikal , M.J. Reduced pressure ice fog technique for controlled ice nucleation during freeze-drying . AAPS PharmSciTech 2009 , 10 , 1406 – 1411 .
   PubMed Web of Science ®Google Scholar
• Konstantinidis , A.K. ; Kuu , W. ; Otten , L. ; Nail , S.L. ; Sever , R.R. Controlled nucleation in freeze-drying: Effects on pore size in the dried product layer, mass transfer resistance, and primary drying rate . Journal of Pharmaceutical Sciences 2011 , 100 , 3453 – 3470 .
   PubMed Web of Science ®Google Scholar
• Velardi , S.A. ; Hammouri , H. ; Barresi , A.A. In line monitoring of the primary drying phase of the freeze-drying process in vial by means of a Kalman filter based observer . Chemical Engineering Research and Design 2009 , 87 , 1409 – 1419 .
   Web of Science ®Google Scholar
• Velardi , S.A. ; Hammouri , H. ; Barresi , A.A. Development of a high gain observer for in-line monitoring of sublimation in vial freeze-drying . Drying Technology 2010 , 28 , 256 – 268 .
   Web of Science ®Google Scholar
• Bosca , S. ; Fissore , D. Design and validation of an innovative soft-sensor for pharmaceuticals freeze-drying monitoring . Chemical Engineering Science 2011 , 66 , 5127 – 5136 .
   Web of Science ®Google Scholar
• Bosca , S. ; Fissore , D. ; Barresi , A.A. Use of soft-sensors to monitor a pharmaceuticals freeze-drying process in vials . Pharmaceutical Development and Technology 2014 , 19 , 148 – 159 .
   PubMed Web of Science ®Google Scholar
• Bosca , S. ; Barresi , A.A. ; Fissore , D. Use of a soft sensor for the fast estimation of dried cake resistance during a freeze-drying cycle. International Journal of Pharmaceutics 2013 , 451 , 23 – 33 .
   Google Scholar
• Patel , S.M. ; Doen , T. ; Pikal , M.J. Determination of the end point of primary drying in freeze-drying process control . AAPS PharmSciTech 2010 , 11 , 73 – 84 .
   PubMed Web of Science ®Google Scholar
• Fissore , D. ; Velardi , S.A. ; Barresi , A.A. In-line control of a freeze-drying process in vials . Drying Technology 2008 , 26 , 685 – 694 .
   Web of Science ®Google Scholar
• Bosca , S. ; Barresi , A.A. ; Fissore , D. Fast freeze-drying cycle design and optimization using a PAT based on the measurement of product temperature . European Journal of Pharmaceutics and Biopharmaceutics . In press. doi: 10.1016/j.ejpb.2013.04.008.
   Web of Science ®Google Scholar