REFERENCES
- Fytili, D.; Zabaniotou, A. Utilization of sewage sludge in EU application of old and new methods: A review. Renewable and Sustainable Energy Reviews 2008, 12, 116–140.
- Manara, P.; Zabaniotou, A. Towards sewage sludge based biofuels via thermochemical conversion: A review. Renewable and Sustainable Energy Reviews. 2012, 16, 2566–2582.
- Kudra, T. Sticky region in drying: Definition and identification. Drying Technology 2003, 21, 1457–1469.
- Chen, G.; Lock Yue, P.; Mujumdar, A.S. Sludge dewatering and drying. Drying Technology 2002, 20, 883–916.
- Arlabosse, P.; Chavez, S.; Lecomte, D. Method for thermal design of paddle dryers: Application to municipal sewage sludge. Drying Technology 2004, 22, 2375–2393.
- Arlabosse, P.; Ferrasse, J.-H.; Lecomte, D.; Crine, M.; Dumont, Y.; Léonard, A. Efficient sludge thermal processing: From drying to thermal valorization. In Modern Drying Technology; E. Tsotsas and A.S. Mujumdar, Eds.; Wiley-VCH Verlag GmbH & Co.: Weinheim, Germany, 2011; 295–329.
- Rulkens, W. Sewage sludge as a biomass resource for the production of energy: Overview and assessment of the various options. Energy Fuels 2008, 22, 9–15.
- Tazaki, M.; Tsuno, H.; Takaoka, M.; Shimizu, K. Modeling of sludge behavior in a steam dryer. Drying Technology 2011, 29, 1748–1757.
- Charlou, C.; Sauceau, M.; Arlabosse, P. Characterisation of residence time distribution in a continuous paddle dryer. J. Residuals Sci. Technol. 2013, 10, 117–125.
- Milhé, M.; Charlou, C.; Sauceau, M.; Arlabosse, P. Modeling of sewage sludge flow in a continuous paddle dryer. Drying Technology (accepted for publication).
- Box, G.E.P.; Hunter, J.S.; Hunter, W.G. Statistics for Experimenters: Design, Innovation, and Discovery; Wiley-Interscience: Hoboken, NJ, 2005.
- Box, G.E.P.; Hunter, J.S. Multi-factor experimental designs for exploring response surfaces. The Annals of Mathematical Statistics 1957, 28, 195–241.
- Montgomery, D.C. Design and Analysis of Experiments, 8th ed.; Wiley: Hoboken, NJ, 2012.
- Ferrasse, J.H.A.P. Heat, momentum, and mass transfer measurements in indirect agitated sludge dryer. Drying Technology 2002, 20, 749–769.
- Charlou, C.; Milhé, M.; Sauceau, M.; Arlabosse, P. A new methodology for measurement of sludge residence time distribution in a paddle dryer using X-ray fluorescence analysis. Water Research (accepted for publication).
- Liu, X.Y.; Specht, E. Mean residence time and hold-up of solids in rotary kilns. Chemical Engineering Science 2006, 61, 5176–5181.
- Kramers, H.; Croockewit, P. The passage of granular solids through inclined rotary kilns. Chemical Engineering Science 1952, 1, 259–265.
- Ferrasse, J.-H.; Seyssiecq, I.; Roche, N. Thermal gasification: A feasible solution for sewage sludge valorisation? Chem. Eng. Technol. 2003, 26, 941–945.