Publication Cover
Drying Technology
An International Journal
Volume 35, 2017 - Issue 9
484
Views
18
CrossRef citations to date
0
Altmetric
ARTICLES

Microencapsulated ginger oil properties: Influence of operating parameters

, , , , , & show all

References

  • Keshani, S.; Daud, W.R.W.; Nourouzi, M.M.; Namvar, F.; Ghasemi, M. Spray drying: an overview on wall deposition, process and modeling. Journal of Food Engineering 2015, 146, 152–162.
  • Jafari, S.M.; Assadpoor, E.; He, Y.; Bhandari, B. Re-coalescence of emulsion droplets during high-energy emulsification. Food Hydrocolloids 2008, 22, 1191–1202.
  • Dima, C.; Pătraşcu, L.; Cantaragiu, A.; Alexe, P.; Dima, S. The kinetics of the swelling process and the release mechanisms of Coriandrum sativum L. essential oil from chitosan/alginate/inulin microcapsules. Food Chemistry 2016, 195, 39–48.
  • Chari, K.L.; Manasa, D.; Srinivas, P.; Sowbhagya, H.B. Enzyme-assisted extraction of bioactive compounds from ginger (Zingiber officinale Roscoe). Food Chemistry 2013, 139, 509–514.
  • Yeh, H-Y.; Chuang, C-H.; Chen, H-C.; Wan, C-J.; Chen, T-L.; Lin, L-Y. Bioactive components analysis of two various gingers (Zingiber officinale Roscoe) and antioxidant effect of ginger extracts. LWT—Food Science and Technology 2014, 55, 329–334.
  • An, K.; Zhao, D.; Wang, Z.; Wu, J.; Xu, Y.; Xiao, G. Comparison of different drying methods on Chinese ginger (Zingiber officinale Roscoe): Changes in volatiles, chemical profile, antioxidant properties, and microstructure. Food Chemistry 2016, 197, 1292–1300.
  • Yamamoto-Ribeiro, M.M.G.; Grespan, R.; Kohiyama, C.Y.; Ferreira, F.D.; Mossini, S.A.G.; Silva, E.L.; Abreu Filho, B.A.; Mikcha, J.M.G.; Machinski Junior, M.M. Effect of Zingiber officinale essential oil on Fusarium verticillioides and fumonisin production. Food Chemistry 2013, 141, 3147–3152.
  • Singh, G.; Kapoor, I.P.; Singh, P.; de Heluani, C.S.; de Lampasona, M.P.; Catalan, C.A. Chemistry, antioxidant and antimicrobial investigations on essential oil and oleoresins of Zingiber officinale. Food and Chemical Toxicology 2008, 46, 3295–3302.
  • Wohlmuth, H.; Smith, M.K.; Brooks, L.O.; Myers, S.P.; Leach, D.N. Essential oil composition of diploid and tetraploid clones of ginger (Zingiber officinale Roscoe) grown in Australia. Journal of Agricultural and Food Chemistry 2006, 54, 1414–1419.
  • Yu, Y.; Huanga, T.; Yang, B.; Liu, X.; Duan, G. Development of gas chromatography–mass spectrometry with microwave distillation and simultaneous solid-phase microextraction for rapid determination of volatile constituents in ginger. Journal of Pharmaceutical and Biomedical Analysis 2007, 43, 24–31.
  • Derringer, G.; Suich, R. Simultaneous optimization of several response variables. Journal of Quality Technology 1980, 12, 214–219.
  • Fernandes, R.V.B.; Marques, G.R.; Borges, S.V.; Botrel, D.A. Effect of solids content and oil load on the microencapsulation process of rosemary essential oil. Industrial Crops and Products 2014, 58, 173–181.
  • Silva, E.K.; Gomes, M.T.M.S.; Hubinger, M.D.; Cunha, R.L.; Meireles, M.A.A. Ultrasound-assisted formation of annatto seed oil emulsions stabilized by biopolymers. Food Hydrocolloids 2015, 47, 1–13.
  • Fernandes, R.V.B.; Borges, S.V.; Botrel, D.A. Influence of spray drying operating conditions on microencapsulated rosemary essential oil properties. Ciência e Tecnologia de Alimentos 2013, 33, 171–178.
  • Fernandes, R.V.B.; Borges, S.V.; Botrel, D.A.; Silva, E.K.; Costa, J.M.G.; Queiroz, F. Microencapsulation of rosemary essential oil: characterization of particles. Drying Technology 2013, 31, 1245–1254.
  • Association of Official Analytical Chemists—AOAC. Official Methods of Analysis, 17th ed.; AOAC: Gaithersburg, MD, 2007.
  • Fuchs, M.; Turchiuli, C.; Bohin, M.; Cuvelier, M.E.; Ordonnaud, C.; Peyrat-Maillard, M.N.; Dumoulin, E. Encapsulation of oil in powder using spray drying and fluidised bed agglomeration. Journal of Food Engineering 2006, 75, 27–35.
  • Jinapong, N.; Suphantharika, M.; Jammong, P. Production of instant soymilk powders by ultrafiltration, spray drying and fluidized bed agglomeration. Journal of Food Engineering 2008, 84, 194–205.
  • Goula, A.M.; Adamopoulos, K.G. Effect of maltodextrin addition during spray drying of tomato pulp in dehumidified air: II. Powder properties. Drying Technology 2008, 26, 726–737.
  • Li, P-H.; Lu, W-C. Effects of storage conditions on the physical stability of D-limonene nanoemulsion. Food Hydrocolloids 2016, 53, 218–224.
  • Silva, E.K.; Rosa, M.T.M.G.; Meireles, M.A.A. Ultrasound-assisted formation of emulsions stabilized by biopolymers. Current Opinion in Food Science 2015, 5, 50–59.
  • Añón, M.C.; Sorgentini, D.A.; Wagner, J.R. Relationship between different hydration properties of commercial and laboratory soybean isolates. Journal of Agricultural and Food Chemistry 2001, 49, 4852–4858.
  • Silva, E.K.; Meireles, M.A.A. Influence of the degree of inulin polymerization on the ultrasound-assisted encapsulation of annatto seed oil. Carbohydrate Polymers 2015, 133, 578–586.
  • Şahin-Nadeem, H.; Dinçer, C.; Torun, M.; Topuz, A.; Özdemir, F. Influence of inlet air temperature and carrier material on the production of instant soluble sage (Salvia fruticosa Miller) by spray drying. LWT—Food Science and Technology 2013, 52, 31–38.
  • Jangam, S.V.; Thorat, B.N. Optimization of spray drying of ginger extract. Drying Technology 2010, 28, 1426–1434.
  • Shi, Q.; Fang, Z.; Bhandari, B. Effect of addition of whey protein isolate on spray-drying behavior of honey with maltodextrin as a carrier material. Drying Technology 2013, 31, 1681–1692.
  • Şahin-Nadeem, H.; Torun, M. Özdemir, F. Spray drying of the mountain tea (Sideritis stricta) water extract by using different hydrocolloid carriers. LWT—Food Science and Technology 2011, 44, 1626–1635.
  • Reineccius, G.A. The spray drying of food flavors. Drying Technology 2004, 22, 1289–1324.
  • Botrel, D.A.; Borges, S.V.; Fernandes, R.V.B.; Viana, A.D.; Costa, J.M.G.; Marques, G.R. Evaluation of spray drying conditions on properties of microencapsulated oregano essential oil. International Journal of Food Science & Technology 2012, 47, 2289–2296.
  • Santhanam, A.K.; Lekshmi, M.; Chouksey, M.K.; Tripathi, G.; Gudipati, V. Delivery of omega-3 fatty acids into cake through emulsification of fish oil-in-milk and encapsulation by spray drying with added polymers. Drying Technology 2015, 33, 83–91.
  • Balasubramani, P.; Palaniswamy, P.T.; Visvanathan, R.; Thirupathi, V.; Subbarayan, A.; Maran, J.P. Microencapsulation of garlic oleoresin using maltodextrin as wallmaterial by spray drying technology. International Journal of Biological Macromolecules 2015, 72, 210–217.
  • Díaz-Bandera, D.; Carvajal, A.V.; Dublán-García, O.; Quintero-Salazar, B.; Dominguez-Lopez, A. Assessing release kinetics and dissolution of spray-dried Roselle (Hibiscus sabdariffa L.) extract encapsulated with different carrier agents. LWT—Food Science and Technology 2015, 64, 693–698.
  • Anwar, S.H.; Kunz, B. The influence of drying methods on the stabilization of fish oil microcapsules: Comparison of spray granulation, spray drying, and freeze drying. Journal of Food Engineering 2011, 105, 367–378.
  • Botrel, D.A.; Borges, S.V.; Fernandes, R.V.B.; Carmo, E.L. Optimization of fish oil spray drying using a protein:inulin system. Drying Technology 2014, 32, 279–290.
  • Garcia, L.C.; Tonon, R.V.; Hubinger, M.D. Effect of homogenization pressure and oil load on the emulsion properties and the oil retention of microencapsulated basil essential oil (Ocimum basilicum L.). Drying Technology 2012, 30, 1413–1421.

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.