On the robustness of the soft sensors used to monitor a vial freeze-drying process

References

• Mellor, J.D. Fundamentals of Freeze-Drying; Academic Press: London, 1978.
   Google Scholar
• Jennings, T.A. Lyophilization: Introduction and Basic Principles; Interpharm/CRC Press: Boca Raton, 1999.
   Google Scholar
• Oetjen, G.W.; Haseley, P. Freeze-Drying, 2nd ed.; Wiely-VHC: Weinheim, 2004.
   Google Scholar
• Franks, F. Freeze-Drying of Pharmaceuticals and Biopharmaceuticals; Royal Society of Chemistry: Cambridge, 2007.
   Google Scholar
• Fissore, D. Freeze-drying of pharmaceuticals. In Encyclopedia of Pharmaceutical Science and Technology; J. Swarbrick Ed.; 4th ed.; CRC Press: London, 2013; 1723–1737.
   Google Scholar
• Bellows, R.J.; King, C.J. Freeze-drying of aqueous solutions: Maximum allowable operating temperature. Cryobiology 1972, 9, 559–561.
   PubMed Web of Science ®Google Scholar
• Tsourouflis, S.; Flink, J.M.; Karel, M. Loss of structure in freeze-dried carbohydrates solutions: Effect of temperature, moisture content and composition. Journal of the Science of Food and Agriculture 1976, 27, 509–519.
   Web of Science ®Google Scholar
• Adams, G.D.J.; Irons, L.I. Some implications of structural collapse during freeze-drying using Erwinia caratovora L-asparaginase as a model. Journal of Chemical Technology and Biotechnology 1993, 58, 71–76.
   PubMed Web of Science ®Google Scholar
• Pikal, M.J. Freeze-drying of proteins: Process, formulation, and stability. In Formulation and Delivery of Proteins and Peptides; Cleland, J.L. Langer, R. Eds.; Americal Chemical Society: Washington, DC, 1994; 120–133.
   Google Scholar
• Franks, F. Freeze-drying of bioproducts: Putting principles into practice. European Journal of Pharmaceutics and Biopharmaceutics 1998, 45, 221–229.
   PubMed Web of Science ®Google Scholar
• Wang, D.Q.; Hey, J.M.; Nail, S.L. Effect of collapse on the stability of freeze-dried recombinant factor VIII and α-amylase. Journal of Pharmaceutical Sciences 2004, 93, 1253–1263.
   PubMed Web of Science ®Google Scholar
• Pisano, R.; Fissore, D.; Barresi, A.A. In-line and off-line optimization of freeze-drying cycles for pharmaceutical products. Drying Technology 2013, 31, 905–919.
   Web of Science ®Google Scholar
• Fissore, D.; Pisano, R.; Barresi, A.A. Using mathematical modeling and prior knowledge for QbD in freeze-drying processes. In Quality by Design for Biopharmaceutical Drug Product Development; F. Jameel S. Hershenson M.A. Khan S. Martin-Moe Eds.; Springer: New York, 2015; 565–593.
   Google Scholar
• Fissore, D.; Pisano, R.; Barresi, A.A. Model-based framework for the analysis of failure consequences in a freeze-drying process. Industrial & Engineering Chemistry Research 2012, 51, 12386–12397.
   Web of Science ®Google Scholar
• Velardi, S.A.; Barresi, A.A. Development of simplified models for the freeze-drying process and investigation of the optimal operating conditions. Chemical Engineering Research and Design 2008, 86, 9–22.
   Web of Science ®Google Scholar
• Barresi, A.A.; Fissore, D. In-line product quality control in freeze drying of pharmaceuticals. In Modern Drying Technology - Volume 3: Product Quality and Formulation; Tsotsas, E.; Mujumdar, A.S. Eds.; Verlag GmbH & Co. KGaA: Weinheim, 2011; 91–154.
   Google Scholar
• Milton, N.; Pikal, M.J.; Roy, M.L.; Nail, S.L. Evaluation of manometric temperature measurement as a method of monitoring product temperature during lyophilisation. PDA Journal of Pharmaceutical Science and Technology 1997, 51, 7–16.
   PubMedGoogle Scholar
• Liapis, A.I.; Sadikoglu, H. Dynamic pressure rise in the drying chamber as a remote sensing method for monitoring the temperature of the product during the primary drying stage of freeze-drying. Drying Technology 1998, 16, 1153–1171.
   Web of Science ®Google Scholar
• Chouvenc, P.; Vessot, S.; Andrieu, J.; Vacus, P. Optimization of the freeze-drying cycle: a new model for pressure rise analysis. Drying Technology 2004, 22, 1577–1601.
   Web of Science ®Google Scholar
• Velardi, S.A.; Rasetto, V.; Barresi, A.A. Dynamic Parameters estimation method: Advanced Manometric Temperature Measurement approach for freeze-drying monitoring of pharmaceutical. Industrial & Engineering Chemistry Research 2008, 47, 8445–8457.
   Web of Science ®Google Scholar
• Fissore, D.; Pisano, R.; Barresi, A.A. On the methods based on the Pressure Rise Test for monitoring a freeze-drying process. Drying Technology 2011, 29, 73–90.
   Web of Science ®Google Scholar
• Gieseler, H.; Kessler, W.J.; Finson, M.; Davis, S.J.; Mulhall, P.A.; Bons, V.; Debo, D.J.; Pikal, M.J. Evaluation of Tunable Diode Laser Absorption Spectroscopy for in-process water vapor mass flux measurement during freeze drying. Journal of Pharmaceutical Sciences 2007, 96, 1776–1793.
   PubMed Web of Science ®Google Scholar
• Kuu, W.Y.; Nail, S.L.; Sacha, G. Rapid determination of vial heat transfer parameters using tunable diode laser absorption spectroscopy (TDLAS) in response to step-changes in pressure set-point during freeze-drying. Journal of Pharmaceutical Sciences 2009, 98, 1136–1154.
   PubMed Web of Science ®Google Scholar
• Kuu, W.Y.; O’Bryan, K.R.; Hardwick, L.M.; Paul, T.W. Product mass transfer resistance directly determined during freeze-drying cycle runs using tunable diode laser absorption spectroscopy (TDLAS) and pore diffusion model. Pharmaceutical Development and Technology 2011, 16, 343–357.
   PubMed Web of Science ®Google Scholar
• Mohd, J.A.; Ha, N.H.; Hussain, M.A.; Dochain, D. Review and classification of recent observers applied in chemical process systems. Computers & Chemical Engineering 2015, 76, 27–41.
   Web of Science ®Google Scholar
• Bosca, S.; Barresi, A.A.; Fissore, D. Use of a soft-sensor for the fast estimation of dried cake resistance during a freeze-drying cycle. International Journal of Pharmaceutics 2013, 451, 23–33.
   PubMed Web of Science ®Google Scholar
• Oddone, I.; Fulginiti.D.; Barresi, A.A.; Grassini, S.; Pisano, R. Non-invasive temperature monitoring in freeze drying: Control of freezing as a case study. Drying Technology 2015, 33, 1621–1630.
   Web of Science ®Google Scholar
• Grassini, S.; Barresi, A.; Parvis, M. Inert thermocouple with nanometric thickness for lyophilization monitoring. IEEE Transactions on Instrumentation and Measurement 2013, 62, 1276–1283.
   Web of Science ®Google Scholar
• Parvis, M.; Grassini, S.; Fulginiti, D.; Pisano, R.; Barresi, A.A. Sputtered thermocouple array for vial temperature mapping. In Proceedings of IEEE International Instrumentation and Measurements Technology Conference “I2MTC 2014”, Montevideo, Uruguay, May 12–15, 2014; 1465–1470.
   Google Scholar
• Velardi, S.A.; Hammouri, H.; Barresi, A.A. In line monitoring of the primary drying phase of the freeze-drying process in vial by means of a Kalman filter based observer. Chemical Engineering Research and Design 2009, 87, 1409–1419.
   Web of Science ®Google Scholar
• Velardi, S.A.; Hammouri, H.; Barresi, A.A. Development of a high gain observer for inline monitoring of sublimation in vial freeze-drying. Drying Technology 2010, 28, 256–268.
   Web of Science ®Google Scholar
• Bosca, S.; Fissore, D. Design and validation of an innovative soft-sensor for pharmaceuticals freeze-drying monitoring. Chemical Engineering Science 2011, 66, 5127–5136.
   Web of Science ®Google Scholar
• Bosca, S.; Barresi, A.A.; Fissore, D. Fast freeze-drying cycle design and optimization using a PAT based on the measurement of product temperature. European Journal of Pharmaceutics and Biopharmaceutics 2013, 85, 253–262.
   PubMed Web of Science ®Google Scholar
• Bosca, S.; Corbellini, S.; Barresi, A.A.; Fissore, D. Freeze-drying monitoring using a new Process Analytical Technology: Toward a “zero defect” process. Drying Technology 2013, 31, 1744–1755.
   Web of Science ®Google Scholar
• Bosca, S.; Barresi, A.A.; Fissore, D. Use of soft-sensors to monitor a pharmaceuticals freeze-drying process in vials. Pharmaceutical Development and Technology 2014, 19, 148–159.
   PubMed Web of Science ®Google Scholar
• Bosca, S.; Barresi, A.A.; Fissore, D. Design of a robust soft-sensor to monitor in-line a freeze-drying process. Drying Technology 2015, 33, 1039–1050.
   Web of Science ®Google Scholar
• Kalman, R.E. A new approach to linear filtering and prediction. Transactions ASME – Journal Basic Engineering 1960, 82, 35–45.
   Google Scholar
• Nakagawa, K.; Hottot, A.; Vessot, S.; Andrieu, J. Modeling of freezing step during freeze-drying of drugs in vials. AIChE Journal 2007, 53, 1362–1372.
   Web of Science ®Google Scholar
• Kuu, W.Y.; Doty, M.J.; Rebbeck, C.L.; Hurst, W.S.; Cho, Y.K. Gap-freezing approach for shortening the lyophilization cycle time of pharmaceutical formulations – Demonstration of the concept. Journal of Pharmaceutical Sciences 2013, 102, 2578–2588.
   Web of Science ®Google Scholar
• Patel, S.M.; Doen, T.; Pikal, M.J. Determination of end point of primary drying in freeze-drying process control. AAPS PharmSciTech 2010, 11, 73–84.
   PubMed Web of Science ®Google Scholar
• Pisano, R.; Fissore, D.; Barresi, A.A. Heat transfer in freeze-drying apparatus. In Developments in Heat Transfer; M.A. dos Santos Bernardes Ed.; InTech - Open Access Publisher: Rijeka, 2011; 91–114.
   Google Scholar