References
- Langrish, T.; Keey, R.; Kumar, M. Improving the Quality of Timber from Red Beech (n. Fosca) by Intermittent Drying. Drying Technol. 1992, 10, 947–960. DOI: 10.1080/07373939208916489.
- Chafe, S.Preheating and Continuous and Intermittent Drying in Boards of E. regnans. Holzforschung 1995, 49, 227–233.
- Herritsch, A.; Dronfield, J.; Nijdam, J. Intermittent and Continuous Drying of Red Beech Timber From the Green Condition. Drying Technol. 2010, 28, 269–277. DOI: 10.1080/07373930903530287.
- Milić, G.; Kolin, B.; Lovrić, A.; Todorović, N.; Popadić, R. Drying of Beech (Fagus sylvatica L.) Timber in Oscillation Climates: Drying Time and Quality.)Holzforschung 2013, 67, 805–813. DOI: 10.1515/hf-2012-0203.
- Rémond, R.; Passard, J.; Perré, P. The Effect of Temperature and Moisture Content on the Mechanical Behaviour of Wood: A Comprehensive Model Applied to Drying and Bending. Eur. J. Mech. A/Solids 2007, 26, 558–572. DOI: 10.1016/j.euromechsol.2006.09.008.
- Sackey, E.; Avramidis, S.; Oliveira, L. C. Exploratory Evaluation of Oscillation Drying for Thick Hemlock Timbers. Holzforschung 2004, 58, 428–433. DOI: 10.1515/hf.2004.065.
- Chua, K.; Mujumdar, A.; Chou, S. Intermittent Drying of Bioproducts––An Overview. Bioresour. Technol. 2003, 90, 285–295. DOI: 10.1016/s0960-8524(03)00133-0.
- Salin, J. Theoretical Analysis of Timber Drying in Oscillating Climates. Holzforschung 2003, 57, 427–432.
- Salem, T.; Perré, P.; Bouali, A.; Mougel, E.; Rémond, R. Experimental and Numerical Investigation of Intermittent Drying of Timber. Drying Technol. 2016, 35, 593–605. DOI: 10.1080/07373937.2016.1195842.
- Phonetip, K.; Ozarska, B.; Brodie, G.; Harris, G.; Belleville, B. Quality Assessment of Eucalyptus delegatensis Dried in the Solar Kiln. IUFRO Division 5 Conference/SWST 60th International Convention Forest Sector Innovations for a Greener Future, 12–16 June in Vancouver, Canada, 2017.
- Yuniarti, K. Intermittent Drying of Eucalyptus saligna. Ph.D. Thesis, The University of Melbourne, 2015.
- Yuniarti, K.; Ozarska, B.; Harris, G.; Brodie, G.; Waugh, G. Moisture Distribution and Defect Development During Intermittent Drying of Eucalyptus saligna. The International Conference of Indonesia Forestry Researchers III, IPB International Convention Centre, Botani Square, Borgor, Indonesia, 2015.
- Rozsa, A.; Mills, R. Index of Kiln Seasoning Schedules. In Australian Timber Seasoning Manual, Grahame C. Waterson, Ed.; Tasmania, 1997; 167–175.
- Carlsson, P.; Arfvidsson, J. Optimized Wood Drying. Drying Technol. 2000, 18, 1779–1796. DOI: 10.1080/07373930008917810.
- Read, W.; Choda, A.; Copper, P. Solar Timber Kiln. Sol. Energy 1974, 15, 309–316.
- AS/NZS. Timber - Assessment of Drying Quality. Sai Global. Standards Australia International Ltd. Wellington, Sydney. ISBN: 0–7337-3818–42001.
- Vega-Mercado, H.; Marcela, M.; Barbosa-Cánovas, G. Advances in Dehydration of Foods. J. Food Eng. 2001, 49, 271–289. DOI: 10.1016/s0260-8774(00)00224-7.
- Fortin, Y.; Defo, M.; Nabhani, M.; Tremblay, C.; Gendron, G. A Simulation Tool for the Optimization of Lumber Drying Schedules. Drying Technol. 2004, 22, 963–983. DOI: 10.1081/drt-120038575.
- AS, AS 2082–2007. Timber-Hardwood-Visually Stress-Graded for Structural Purposes; Committee TM-003 Timber Grading: Sydney, NSW, Australia, 2007.
- Phonetip, K.; Ozarska, B.; Brodie, G. Comparing Two Internal Check Measurement Methods for Wood Drying Quality Assessment. Eur. J. Wood Wood Products 2017, 75, 139–142. DOI: 10.1007/s00107-016-1115-1.
- Simpson, W. Estimating Heating Times of Wood Boards, Square Timbers, and Logs in Saturated Steam by Multiple Regression. Forest Products J. 2006, 56, 26–28.
- Lewis, W. The Rate of Drying of Solid Materials. Ind. Eng. Chem. 1921, 13, 427–432. DOI: 10.1021/ie50137a021.
- Bootle, K. Wood in Australia: Types, Properties and Uses; McGraw-Hill Australia Pty Ltd. North Ryde NSW, 2005.
- Blakemore, P.; Langrish, T. Effect of Pre-Drying Schedule Ramping on Collapse Recovery and Internal Checking with Victorian ash Eucalypts. Wood Sci. Technol. 2008, 42, 473–492. DOI: 10.1007/s00226-008-0185-6.