Inert particles as process aid in spray-freeze drying

References

• Jin, J.; Yurkow, E. J.; Adler, D.; Lee, T. Improved Freeze Drying Efficiency by Ice Nucleation Proteins with Ice Morphology Modification. Food Res. Int. 2018, 106, 90–97. DOI: 10.1016/j.foodres.2017.12.028.
   PubMed Web of Science ®Google Scholar
• Duan, X.; Yang, X.; Ren, G.; Pang, Y.; Liu, L.; Liu, Y. Technical Aspects in Freeze-Drying of Foods. Drying Technol. 2016, 34, 1271–1285. DOI: 10.1080/07373937.2015.1099545.
   Web of Science ®Google Scholar
• Ceballos, A. M.; Giraldo, G. I.; Orrego, C. E. Effect of Freezing Rate on Quality Parameters of Freeze Dried Soursop Fruit Pulp. J. Food Eng. 2012, 111, 360–365. DOI: 10.1016/j.jfoodeng.2012.02.010.
   Web of Science ®Google Scholar
• Dalvi-Isfahan, M.; Hamdami, N.; Xanthakis, E.; Le-Bail, A.; Rise, R. I. O. S.; Jordbruk, O. L.; Biovetenskap, O. M. Review on the Control of Ice Nucleation by Ultrasound Waves, Electric and Magnetic Fields. J. Food Eng. 2017, 195, 222–234. DOI: 10.1016/j.jfoodeng.2016.10.001.
   Web of Science ®Google Scholar
• Assegehegn, G.; Brito-de La Fuente, E.; Franco, J. M.; Gallegos, C. The Importance of Understanding the Freezing Step and Its Impact on Freeze-Drying Process Performance. J. Pharm. Sci. 2019, 108, 1378–1395. DOI: 10.1016/j.xphs.2018.11.039.
   PubMed Web of Science ®Google Scholar
• Ishwarya, S. P.; Anandharamakrishnan, C.; Stapley, A. G. F. Spray-Freeze-Drying: A Novel Process for the Drying of Foods and Bioproducts. Trends Food Sci. Technol. 2015, 41, 161–181. DOI: 10.1016/j.tifs.2014.10.008.
   Web of Science ®Google Scholar
• Liapis, A. I.; Bruttini, R. A Mathematical Model for the Spray Freeze Drying Process: The Drying of Frozen Particles in Trays and in Vials on Trays. Int. J. Heat Mass Transfer 2009, 52, 100–111. DOI: 10.1016/j.ijheatmasstransfer.2008.06.026.
   Web of Science ®Google Scholar
• Yu, Z.; Johnston, K. P.; Williams, R. O. Spray Freezing into Liquid versus Spray-Freeze Drying: Influence of Atomization on Protein Aggregation and Biological Activity. Eur. J. Pharm. Sci. 2006, 27, 9–18. DOI: 10.1016/j.ejps.2005.08.010.
   PubMed Web of Science ®Google Scholar
• Leuenberger, H.; Plitzko, M.; Puchkov, M. Spray Freeze Drying in a Fluidized Bed at Normal and Low Pressure. Drying Technol. 2006, 24, 711–719. DOI: 10.1080/07373930600684932.
   Web of Science ®Google Scholar
• Xu, Q.; Wang, J.; Li, M.-M.; Li, Z.-Y. Experiments and Simulation of a Single Droplet Impacting on Cold Surfaces. J. Chem. Ind. Eng. 2016, 67, 4160–4168. DOI: 10.11949/j.issn.0438-1157.20160158.
   Google Scholar
• Gieseler, H.; Lee, G. Gravimetric Measurement of Momentary Drying Rate of Spray Freeze-Dried Powders in Vials. J. Pharm. Sci. 2009, 98, 3447–3455. DOI: 10.1002/jps.21677.
   PubMed Web of Science ®Google Scholar
• Bruttini, R.; Liapis, A. I. The Drying Rates of Spray Freeze Drying Systems Increase through the Use of Stratified Packed Bed Structures. Int. J. Heat Mass Transfer 2015, 90, 515–522. DOI: 10.1016/j.ijheatmasstransfer.2015.06.081.
   Web of Science ®Google Scholar
• Xu, Q.; Geng, X.-R.; Li, Z.-Y. Morphology of Particle Produced by Spray-Freeze Drying. Chem. Ind. Eng. Prog. 2013, 32, 270–275. DOI: 10.3969/j.issn.1000-6613.2013.02.004.
   Google Scholar
• Wang, Z.-L.; Finlay, W. H.; Peppler, M. S.; Sweeney, L. G. Powder Formation by Atmospheric Spray-Freeze-Drying. Powder Technol. 2006, 170, 45–52. DOI: 10.1016/j.powtec.2006.08.019.
   Web of Science ®Google Scholar
• Perazzini, M. T. B.; Freire, F. B.; Ferreira, M. C.; Freire, J. T. Stability and Performance of a Spouted Bed in Drying Skimmed Milk: Influence of the Cone Angle and Air Inlet Device. Drying Technol. 2018, 36, 341–354. DOI: 10.1080/07373937.2017.1331240.
   Web of Science ®Google Scholar
• Leontieva, A. I.; Bryankin, K. V.; Konovalov, V. I.; Utrobin, N. P. Heat and Mass Transfer during Drying of a Liquid Film from the Surface of a Single Inert Particle. Drying Technol. 2002, 20, 729–747. DOI: 10.1081/DRT-120003752.
   Web of Science ®Google Scholar
• Benali, M. Drying of Yellow Pea Starch on Inert Carriers: Drying Kinetics, Moisture Diffusivity, and Product Quality. J. Food Eng. 2012, 110, 337–344. DOI: 10.1016/j.jfoodeng.2012.01.003.
   Web of Science ®Google Scholar
• Pan, Y.-K.; Li, J.-G.; Zhao, L.-J.; Ye, W.-H.; Mujumdar, A. S.; Kudra, T. Performance Characteristics of the Vibrated Fluid Bed of Inert Particles for Drying of Liquid Feeds. Drying Technol. 2001, 19, 2003–2018. DOI: 10.1081/DRT-100107285.
   Web of Science ®Google Scholar
• Freire, J. T.; Ferreira, M. C.; Freire, F. B.; Nascimento, B. S. A Review on Paste Drying with Inert Particles as Support Medium. Drying Technol. 2012, 30, 330–341. DOI: 10.1080/07373937.2011.638149.
   Web of Science ®Google Scholar
• Xu, Q.; Li, Z.-Y.; Wang, R.-F.; Zhu, S.-G. Coating and the Impact of Single Droplet on the Spherical Surface. J. Tianjin Univ. Sci. Technol. 2013, 28, 50–54. DOI: 10.13364/j.issn.1672-6510.2013.01.008.
   Google Scholar
• Qian, L.; Zhang, H. Controlled Freezing and Freeze Drying: A Versatile Route for Porous and Micro-/Nano-Structured Materials. J. Chem. Technol. Biotechnol. 2011, 86, 172–184. DOI: 10.1002/jctb.2495.
   Web of Science ®Google Scholar
• Hindmarsh, J. P.; Russell, A. B.; Chen, X.-D. Fundamentals of the Spray Freezing of Foods—Microstructure of Frozen Droplets. J. Food Eng. 2007, 78, 136–150. DOI: 10.1016/j.jfoodeng.2005.09.011.
   Web of Science ®Google Scholar
• Geng, X.-R.; Xu, Q.; Li, Z.-Y.; Song, J.-T. Numerical Simulation of a Single Droplet Freezing Process. Chem. Ind. Eng. Prog. 2012, 31, 981–986. DOI: 10.16085/j.issn.1000-6613.2012.05.003.
   Google Scholar
• Rogers, S.; Wu, W. D.; Saunders, J.; Chen, X.-D. Characteristics of Milk Powders Produced by Spray Freeze Drying. Drying Technol. 2008, 26, 404–412. DOI: 10.1080/07373930801929003.
   Web of Science ®Google Scholar