Dielectric properties and microwave drying kinetics of drill cuttings contaminated with synthetic drilling fluid

References

• Caenn, R.; Darley, H. C. H.; Gray, G. R. Composition and Properties of Drilling and Completion Fluids; Gulf Professional Publishing: Boston, MA, 2011.
   Google Scholar
• Mitchell, R. F.; Miska, S. Z. Fundamentals of Drilling Engineering (SPE Textbook Series); Society of Petroleum Engineers: Richardson, TX, 2011.
   Google Scholar
• Santos, J. M.; Petri, I. J.; Mota, A. C. S.; Morais, A. D. S.; Ataíde, C. H. Optimization of the Batch Decontamination Process of Drill Cuttings by Microwave Heating. J. Pet. Sci. Eng. 2018, 163, 349–358. DOI: 10.1016/j.petrol.2018.01.003.
   Web of Science ®Google Scholar
• Pereira, M. S.; de Ávila Panisset, C. M.; Martins, A. L.; de Sá, C. H. M.; Barrozo, M. A.; de, S.; Ataíde, C. H. Microwave Treatment of Drilled Cuttings Contaminated by Synthetic Drilling Fluid. Sep. Purif. Technol. 2014, 124, 68–73. DOI: 10.1016/j.seppur.2014.01.011.
   Web of Science ®Google Scholar
• Omran, M.; Fabritius, T.; Elmahdy, A. M.; Abdel-Khalek, N. A.; El-Aref, M.; Elmanawi, A. E. H. Effect of Microwave Pre-treatment on the Magnetic Properties of Iron Ore and Its Implications on Magnetic Separation. Sep. Purif. Technol. 2014, 136, 223–232. DOI: 10.1016/j.seppur.2014.09.011.
   Web of Science ®Google Scholar
• Krishnan, R. Y.; Chandran, M. N.; Vadivel, V.; Rajan, K. S. Insights on the Influence of Microwave Irradiation on the Extraction of Flavonoids from Terminalia Chebula. Sep. Purif. Technol. 2016, 170, 224–233. DOI: 10.1016/j.seppur.2016.06.039.
   Web of Science ®Google Scholar
• Mujumdar, A. S. Ed. Handbook of Industrial Drying; CRC Press: Boca Raton, FL, 2006.
   Google Scholar
• Song, Z.; Yao, L.; Jing, C.; Zhao, X.; Wang, W.; Ma, C. Drying Behavior of Lignite under Microwave Heating. Drying Technol. 2017, 35, 433–443. DOI: 10.1080/07373937.2016.1182547.
   Web of Science ®Google Scholar
• Li, H.; Lin, B.; Hong, Y.; Liu, T.; Huang, Z.; Wang, R.; Wang, Z. Assessing the Moisture Migration during Microwave Drying of Coal Using Low-Field Nuclear Magnetic Resonance. Drying Technol. 2018, 36, 567–577. DOI: 10.1080/07373937.2017.1349136.
   Web of Science ®Google Scholar
• Shang, H.; Snape, C. E.; Kingman, S. W.; Robinson, J. P. Treatment of Oil-Contaminated Drill Cuttings by Microwave Heating in a High-Power Single-Mode Cavity. Ind. Eng. Chem. Res. 2005, 44, 6837–6844. DOI: 10.1021/ie0500772.
   Web of Science ®Google Scholar
• Shang, H.; Snape, C. E.; Kingman, S. W.; Robinson, J. P. Microwave Treatment of Oil-Contaminated North Sea Drill Cuttings in a High Power Multimode Cavity. Sep. Purif. Technol. 2006, 49, 84–90. DOI: 10.1016/j.seppur.2005.08.012.
   Web of Science ®Google Scholar
• Robinson, J. P.; Kingman, S. W.; Snape, C. E.; Barranco, R.; Shang, H.; Bradley, M. S. A.; Bradshaw, S. M. Remediation of Oil-Contaminated Drill Cuttings Using Continuous Microwave Heating. Chem. Eng. J. 2009, 152, 458–463. DOI: 10.1016/j.cej.2009.05.008.
   Web of Science ®Google Scholar
• Robinson, J. P.; Kingman, S. W.; Snape, C. E.; Bradshaw, S. M.; Bradley, M. S. A.; Shang, H.; Barranco, R. Scale-up and Design of a Continuous Microwave Treatment System for the Processing of Oil-Contaminated Drill Cuttings. Chem. Eng. Res. Des. 2010, 88, 146–154. DOI: 10.1016/j.cherd.2009.07.011.
   Web of Science ®Google Scholar
• Santos, J. M.; Pereira, M. S.; Júnior, I. P.; Pena, M. M. R.; Ataíde, C. H. Microwave Drying of Drilled Cuttings in the Context of Waste Disposal and Drilling Fluid Recovery. Energy Technol. 2014, 2, 832–838. DOI: 10.1002/ente.201402053.
   Web of Science ®Google Scholar
• Petri, I.; Pereira, M. S.; Santos, J. M.; Duarte, C. R.; Ataíde, C. H.; Panisset, C. M. Á. Microwave Remediation of Oil Well Drill Cuttings. J. Pet. Sci. Eng. 2015, 134, 23–29. DOI: 10.1016/j.petrol.2015.07.022.
   Web of Science ®Google Scholar
• Rossi, A. S.; Faria, M. G.; Pereira, M. S.; Ataíde, C. H. Kinetics of Microwave Heating and Drying of Drilling Fluids and Drill Cuttings. Drying Technol. 2017, 35, 1130–1140. DOI: 10.1080/07373937.2016.1233425.
   Web of Science ®Google Scholar
• Pereira, M. S.; Santos, J. M.; Barrozo, M. A. S.; Ataíde, C. H.; Martins, A. L. Decontamination of Drilled Cuttings by Microwave Drying: Kinetics Aspects. Braz. J. Pet. Gas 2015, 9, 1–10. DOI: 10.5419/bjpg2015-0001.
   Google Scholar
• Petri, I. J.; Martins, A. L.; Duarte, C. R.; Ataíde, C. H. Development and Performance of a Continuous Industrial Microwave Dryer for Remediation of Drill Cuttings. J. Pet. Sci. Eng. 2019, 176, 362–368. DOI: 10.1016/j.petrol.2019.01.075.
   Web of Science ®Google Scholar
• Giri, S. K.; Prasad, S. Drying Kinetics and Rehydration Characteristics of Microwave-Vacuum and Convective Hot-Air Dried Mushrooms. J. Food Eng. 2007, 78, 512–521. DOI: 10.1016/j.jfoodeng.2005.10.021.
   Web of Science ®Google Scholar
• Liu, C. H.; Zhang, L. B.; Srinivasakannan, C.; Peng, J. H.; Liu, B. G.; Xia, H. Y. Dielectric Properties and Optimization of Parameters for Microwave Drying of Petroleum Coke Using Response Surface Methodology. Drying Technol. 2014, 32, 328–338. DOI: 10.1080/07373937.2013.829489.
   Web of Science ®Google Scholar
• Switzer, A. D. Measuring and Analyzing Particle Size in a Geomorphic Context. In Treatise on Geomorphology; 1st ed.; Shroder, J. F., Ed.; Elsevier Academic Press: London, 2013; pp. 224–242.
   Google Scholar
• Velde, B. Composition and Mineralogy of Clay Minerals. In Origin and Mineralogy of Clays; Velde, B., Ed.; Springer: New York, 1995; pp. 8–42.
   Google Scholar
• API. Recommended Practice for Field Testing of Oil-Based Drilling Fluids, API Recommended Practice 13B-2, Fifth Edition, Includes Errata; American Petroleum Institute: Washington, DC, 2014.
   Google Scholar
• Meredith, R. J. Engineers’ Handbook of Industrial Microwave Heating; Institution of Engineering and Technology: Stevenage, 1998.
   Google Scholar
• Nair, G. R.; Singh, A.; Kurian, J.; Raghavan, G. S. V. Mathematical Analysis of Compound Release during Microwave Assisted Retting of Flax Stems. Biosyst. Eng. 2016, 150, 214–221. DOI: 10.1016/j.biosystemseng.2016.08.009.
   Web of Science ®Google Scholar
• Petri, I.; Santos, J. M.; Rossi, A. S.; Pereira, M. S.; Duarte, C. R.; Ataíde, C. H. Influence of Rock Chemical Composition in Microwave Heating and Decontamination of Drill Cuttings. Mater. Sci. Forum 2017, 899, 469–473.
   Google Scholar
• Buttress, A. J.; Binner, E.; Yi, C.; Palade, P.; Robinson, J. P.; Kingman, S. W. Development and Evaluation of a Continuous Microwave Processing System for Hydrocarbon Removal from Solids. Chem. Eng. J. 2016, 283, 215–222. DOI: 10.1016/j.cej.2015.07.030.
   Web of Science ®Google Scholar
• Chauvin, E. Efficiency Economics and Compliance: A Practical Planning Tool for Optimizing Cuttings Treatment. Presented at the Abu Dhabi International Petroleum Exhibition & Conference, Abu Dhabi, UAE, Nov 12–15, 2018.
   Google Scholar