Characterization and drying kinetics of iron ore pellet feed and sinter feed

References

• United States Geological Survey (USGS). Mineral Commodity Summaries; USGS: Reston, VA 2019.
   Google Scholar
• Organisation, I. M. (IMO). Code of Safe Practice for Solid Bulk Cargoes; IMO: London, 2011.
   Google Scholar
• Munro, M. C.; Mohajerani, A. Determination of the Transportable Moisture Limit of Iron Ore Fines for the Prevention of Liquefaction in Bulk Carriers. Mar. Struct. 2015, 40, 193–224. DOI: 10.1016/j.marstruc.2014.11.004.
   Web of Science ®Google Scholar
• Mujumdar, A. S. Chapter 42 Drying in Mineral Processing. In Handbook of Industrial Drying; Mujumdar, A. S., Ed.; CRC Press: Boca Raton, 2015; pp 861–866
   Google Scholar
• Meyer, K. Pelletizing of Iron Ores; Springer-Verlag: Heidelberg; 1980.
   Google Scholar
• Ljung, A. L.; Lundström, T. S.; Tano, K.; Tano, K. Simulation of Convective Drying of a Cylindrical Iron Ore Pellet. Int. J. Numer. Methods Heat Fluid Flow 2011, 21, 703–716. 10.1108/09615531111148464.
   Web of Science ®Google Scholar
• Athayde, M.; Cota, M.; Covcevich, M. Iron Ore Pellet Drying Assisted by Microwave: A Kinetic Evaluation. Miner. Process. Extr. Metall. Rev. 2018, 39, 266–275. DOI: 10.1080/08827508.2017.1423295.
   Web of Science ®Google Scholar
• Tan, S.; Peng, J.; Shi, H. Modeling and Simulation of Iron Ore Pellet Drying and Induration Process with Accurate Bed Void Fraction Calculation. Dry. Technol. 2016, 34, 651–664. DOI: 10.1080/07373937.2015.1070357.
   Web of Science ®Google Scholar
• Ljung, A.-L.; Lundström, T. S.; Marjavaara, B. D.; Tano, K. Influence of Air Humidity on Drying of Individual Iron Ore Pellets. Dry. Technol. 2011, 29, 1101–1111. DOI: 10.1080/07373937.2011.571355.
   Web of Science ®Google Scholar
• Tsukerman, T.; Duchesne, C.; Hodouin, D. On the Drying Rates of Individual Iron Oxide Pellets. Int. J. Miner. Process 2007, 83, 99–115. DOI: 10.1016/j.minpro.2007.06.004.
   Web of Science ®Google Scholar
• Feng, J. X.; Zhang, Y.; Zheng, H. W.; Xie, X. Y.; Zhang, C. Drying and Preheating Processes of Iron Ore Pellets in a Traveling Grate. Int. J. Miner. Metall. Mater. 2010, 17, 535–540. DOI: 10.1007/s12613-010-0354-0.
   Google Scholar
• Dutra, D. C.; Emrich, M.; Magela, G.; Dias, A.; Ferrosos, C. D. T.; De; Vale, S. A.; Lima-Mg, N. Influence of Drying Temperature and Atmosphere on the Mechanical Strength of Iron-Ore Agglomerates and Sodium Silicates for Application in Sintering Processes. Can. J. Chem. Eng .  2016, 94, 75–80. DOI: 10.1002/cjce.22350.
   Web of Science ®Google Scholar
• Ljung, A. L.; Staffan Lundström, T.; Daniel Marjavaara, B.; Tano, K. Convective Drying of an Individual Iron Ore Pellet - Analysis with CFD. Int. J. Heat Mass Transf. 2011, 54, 3882–3890. DOI: 10.1016/j.ijheatmasstransfer.2011.04.040.
   Web of Science ®Google Scholar
• Ljung, A.; Frishfelds, V.; Lundstro, T. S.; Marjavaara, B. D. Discrete and Continuous Modeling of Heat and Mass Transport in Drying of a Bed of Iron Ore Pellets. Dry. Technol. 2012, 30, 760–773. DOI: 10.1080/07373937.2012.662567.
   Web of Science ®Google Scholar
• Meer, F. P. V. D. Pellet Feed Grinding by HPGR. Miner. Eng. 2015, 73, 21–30.
   Web of Science ®Google Scholar
• Wu, Z. H.; Hu, Y. J.; Lee, D. J.; Mujumdar, A. S.; Li, Z. Y. Dewatering and Drying in Mineral Processing Industry: Potential for Innovation. Dry. Technol. 2010, 28, 834–842. DOI: 10.1080/07373937.2010.490485.
   Web of Science ®Google Scholar
• Krasnyi, B. L.; Tarasovskii, V. P.; Krasnyi, A. B. Development of Ceramic Material and Filtering Element Technology for Disk Vacuum Filtering Units Used in Dewatering Ferrous and Nonferrous Metal Ore Concentrates. Refract. Ind. Ceram. 2009, 50, 107–111. DOI: 10.1007/s11148-009-9156-1.
   Web of Science ®Google Scholar
• Patra, A. S.; Makhija, D.; Mukherjee, A. K.; Tiwari, R.; Sahoo, C. R.; Mohanty, B. D. Improved Dewatering of Iron Ore Fines by the Use of Surfactants. Powder Technol. 2016, 287, 43–50. DOI: 10.1016/j.powtec.2015.09.030.
   Web of Science ®Google Scholar
• Namkung, W.; Cho, M. Pneumatic Drying of Iron Ore Particles in a Vertical Tube. Dry. Technol 2004, 22, 877–891. DOI: 10.1081/DRT-120034268.
   Web of Science ®Google Scholar
• Ghoshdastidar, P. S.; Bhargava, G.; Chhabra, R. P. Computer Simulation of Heat Transfer during Drying and Preheating of Wet Iron Ore. Dry. Technol. 2002, 20, 19–35. DOI: 10.1081/DRT-120001364.
   Web of Science ®Google Scholar
• Sass, A. Simulation of Heat-Transfer Phenomena in a Rotary Kiln. Ind. Eng. Chem. Proc. Des. Dev. 1967, 6, 532–535. DOI: 10.1021/i260024a022.
   Google Scholar
• Litster, J. D.; Waters, A. G. Influence of the Material Properties of Iron Ore Sinter Feed on Granulation Effectiveness. Powder Technol. 1988, 55, 141–151. DOI: 10.1016/0032-5910(88)80097-4.
   Web of Science ®Google Scholar
• Leitner, J. Applicationof Mercury Porosimetry in Evaluating the Quality of Iron Ore Pellets. Powder Technol. 1981, 29, 199–203. DOI: 10.1016/0032-5910(81)85017-6.
   Web of Science ®Google Scholar
• Forsmo, S. P. E.; Vuori, J. P. The Determination of Porosity in Iron Ore Green Pellets by Packing in Silica Sand. Powder Technol. 2005, 159, 71–77. DOI: 10.1016/j.powtec.2005.05.032.
   Web of Science ®Google Scholar
• Rootare, H. M.; Prenzlow, C. F. Surface Area from Mercury Porosimeter Measurements. J. Phys. Chem. 1967, 71, 2733–2736. DOI: 10.1021/j100867a057.
   Web of Science ®Google Scholar
• Page, G. E. Factors Influencing the Maximum Rates of Air Drying Shelled Corn in Thin Layers, Purdue University, 1949.
   Google Scholar
• Yaldiz, O.; Ertekin, C.; Uzun, H. I. Mathematical Modeling of Thin Layer Solar Drying of Sultana Grapes. Energy 2001, 26, 457–465. DOI: 10.1016/S0360-5442(01)00018-4.
   Web of Science ®Google Scholar
• Midilli, A.; Kucuk, H.; Yapar, Z. A New Model for Single-Layer Drying. Dry. Technol 2002, 20, 1503–1513. DOI: 10.1081/DRT-120005864.
   Web of Science ®Google Scholar
• Liu, P. S.; Chen, G. F. Porous Materials, Processing and Applications; Butterworth-Heinemann: Oxford, UK; 2014.
   Google Scholar
• Giesche, H. Mercury Porosimetry: A General (Practical) Overview. Part. Part. Syst. Charact. 2006, 23, 9–11. DOI: 10.1002/ppsc.200601009.
   Web of Science ®Google Scholar
• Pena, E. Q.; Antônio, C.; Gabriel, F. Caracterização Dos Parâmetros de Porosidade de Concentrados de Minério de Ferro Pelo Método de Adsorção de Nitrogênio. [Application of Nitrogen Adsorption Method for the Characterization of Porosity Parameters of Iron Ore Pellet Feed]. Tecnol. Metal. Mater. 2008, 4, 53–57. 10.4322/tmm.00404010.
   Google Scholar
• Abazarpoor, A.; Halali, M.; Hejazi, R.; Saghaeian, M. HPGR Effect on the Particle Size and Shape of Iron Ore Pellet Feed Using Response Surface Methodology. Miner. Process. Extr. Metall. Rev. 2018, 127, 40–48. DOI: 10.1080/03719553.2017.1284414.
   Web of Science ®Google Scholar
• Souza Pinto, T. C.; Slatter, P. T.; Matai, P. H.; Leal Filho, L. S. The Influence of Hematite Particle Shape on Stratification in Pipe Flow. Powder Technol. 2016, 302, 75–80. DOI: 10.1016/j.powtec.2016.08.015.
   Web of Science ®Google Scholar
• Rouquerol, J.; Avnir, D.; Fairbridge, C. W.; Everett, D. H.; Haynes, J. H.; Pernicone, N.; Ramsay, J. D. F.; Sing, K. S. W.; Unger, K. K. Recommendations for the Characterization of Porous Solids. Pure Appl. Chem. 1994, 66, 1739–1758. DOI: 10.1351/pac199466081739.
   Web of Science ®Google Scholar
• Metzger, T.; Tsotsas, E. Influence of Pore Size Distribution on Drying Kinetics: A Simple Capillary Model. Dry. Technol. 2005, 23, 1797–1809. DOI: 10.1080/07373930500209830.
   Web of Science ®Google Scholar
• Schlünder, E. U. Drying of Porous Material during the Constant and the Falling Rate Period: A Critical Review of Existing Hypotheses. Dry. Technol 2004, 22, 1517–1532. DOI: 10.1081/DRT-120038738.
   Web of Science ®Google Scholar
• Schlünder, E. U. On the Mechanism of the Constant Drying Rate Period and Its Relevance to Diffusion Controlled Catalytic Gas Phase Reactions. Chem. Eng. Sci 1988, 43, 2685–2688. DOI: 10.1016/0009-2509(88)80012-5.
   Web of Science ®Google Scholar
• Kemp, I. C.; Oakley, D. E. Modelling of Particulate Drying in Theory and Practice. Dry. Technol 2002, 20, 1699–1750. DOI: 10.1081/DRT-120015410.
   Web of Science ®Google Scholar
• Mujumdar, A. S. Chapter 1 Principles, Classification, and Selection of Dryers. In Handbook of Industrial Drying; Mujumdar, A. S., Ed.; CRC Press: Boca Raton, 2015; pp 3–30
   Google Scholar