Automatic control of a freeze-drying process: Detection of the end point of primary drying

References

• Fissore, D.; Pisano, R.; Barresi, A. A. Process Analytical Technology for Monitoring Pharmaceuticals Freeze-Drying. A Comprehensive Review. Dry Technol. 2018, 36, 1839–1865. DOI: https://doi.org/10.1080/07373937.2018.1440590.
   Web of Science ®Google Scholar
• Thompson, T. N. Process and Device for Determining the End of a Primary Stage of Freeze-Drying. US Patent 4,780,964, Nov 1, 1988.
   Google Scholar
• Nail, S. L.; Johnson, W. Methodology for in-Process Determination of Residual Water in Freeze-Dried Products. Dev. Biol. Stand. 1992, 74, 137–151.
   PubMedGoogle Scholar
• Grassini, S.; Parvis, M.; Barresi, A. A. Inert Thermocouple with Nanometric Thickness for Lyophilization Monitoring. IEEE Trans. Instrum. Meas. 2013, 62, 1276–1283. DOI: https://doi.org/10.1109/TIM.2012.2223312.
   Web of Science ®Google Scholar
• Oddone, I.; Fulginiti, D.; Barresi, A. A.; Grassini, S.; Pisano, R. Non-Invasive Temperature Monitoring in Freeze-Drying: Control of Freezing as a Case Study. Dry Technol. 2015, 33, 1621–1630. DOI: https://doi.org/10.1080/07373937.2015.1040026.
   Web of Science ®Google Scholar
• Barresi, A. A.; Velardi, S. A.; Pisano, R.; Rasetto, V.; Vallan, A.; Galan, M. In-Line Control of the Lyophilization Process. A Gentle PAT Approach Using Software Sensors. Int. J. Refrig. 2009, 32, 1003–1014. DOI: https://doi.org/10.1016/j.ijrefrig.2008.10.012.
   Web of Science ®Google Scholar
• Velardi, S. A.; Hammouri, H.; Barresi, A. A. In-Line Monitoring of the Primary drying phase of the Freeze-Drying Process in Vial by Means of a Kalman Filter Based Observer. Chem. Eng. Res. Des. 2009, 87, 1409–1419. DOI: https://doi.org/10.1016/j.cherd.2009.03.011.
   Web of Science ®Google Scholar
• Velardi, S. A.; Hammouri, H.; Barresi, A. A. Development of a High Gain Observer for in-Line Monitoring of Sublimation in Vial Freeze-Drying. Dry Technol. 2010, 28, 256–268. DOI: https://doi.org/10.1080/07373930903530204.
   Web of Science ®Google Scholar
• Bosca, S.; Barresi, A. A.; Fissore, D. Design of a Robust Soft-Sensor to Monitor in-Line a Freeze-Drying Process. Dry Technol. 2015, 33, 1039–1050. DOI: https://doi.org/10.1080/07373937.2014.982250.
   Web of Science ®Google Scholar
• Schneid, S.; Gieseler, H. Evaluation of a New Wireless Temperature Remote Interrogation System (TEMPRIS) to Measure Product Temperature during Freeze Drying. AAPS PharmSciTech 2008, 9, 729–739. DOI: https://doi.org/10.1208/s12249-008-9099-8.
   PubMed Web of Science ®Google Scholar
• Corbellini, S.; Parvis, M.; Vallan, A. In-Process Temperature Mapping System for Industrial Freeze Dryers. IEEE Trans. Instrum. Meas. 2010, 59, 1134–1140. DOI: https://doi.org/10.1109/TIM.2010.2040909.
   Web of Science ®Google Scholar
• Jennings, T. A.; Duan, H. Calorimetric Monitoring of Lyophilization. PDA J. Pharm. Sci. Technol. 1995, 49, 272–282.
   PubMedGoogle Scholar
• Chen, R.; Slater, N. K. H.; Gatlin, L. A.; Kramer, T.; Shalaev, E. Y. Comparative Rates of Freeze-Drying for Lactose and Sucrose Solutions as Measured by Photographic Recording, Product Temperature, and Heat Flux Transducer. Pharm. Dev. Technol. 2008, 13, 367–374. DOI: https://doi.org/10.1080/10837450802244744.
   PubMed Web of Science ®Google Scholar
• Monteiro Marques, J. P.; Le Loch, C.; Wolff, E.; Rutledge, D. N. Monitoring Freeze‐Drying by Low Resolution Pulse NMR: Determination of Sublimation End Point. J. Food Sci. 1991, 56, 1707–1710. DOI: https://doi.org/10.1111/j.1365-2621.1991.tb08676.x.
   Web of Science ®Google Scholar
• Remmele, R. L.; Stushnoff, C.; Carpenter, J. F. Real-Time in Situ Monitoring of Lysozyme during Lyophilization Using Infrared Spectroscopy: Dehydration Stress in the Presence of Sucrose. Pharm. Res. 1997, 14, 1548–1555. DOI: https://doi.org/10.1023/A:1012170116311.
   PubMed Web of Science ®Google Scholar
• Brülls, M.; Folestad, S.; Sparén, A.; Rasmuson, A. In-Situ Near-Infrared Spectroscopy Monitoring of the Lyophilization Process. Pharm. Res. 2003, 20, 494–499. DOI: https://doi.org/10.1023/A:1022680810474
   PubMed Web of Science ®Google Scholar
• De Beer, T. R. M.; Wiggenhorn, M.; Veillon, R.; Debacq, C.; Mayeresse, Y.; Moreau, B.; Burggraeve, A.; Quinten, T.; Friess, W.; Winter, G.; et al. Importance of Using Complementary Process Analyzers for the Process Monitoring, Analysis, and Understanding of freeze Drying. Anal. Chem. 2009, 81, 7639–7649. DOI: https://doi.org/10.1021/ac9010414.
   PubMed Web of Science ®Google Scholar
• Tang, X.; Pikal, M. J. Design of Freeze-Drying Processes for Pharmaceuticals: Practical Advice. Pharm. Res. 2004, 21, 191–200. DOI: https://doi.org/10.1023/B:PHAM.0000016234.73023.75.
   PubMed Web of Science ®Google Scholar
• Pikal, M. J.; Shah, S.; Senior, D.; Lang, J. E. Physical Chemistry of Freeze-Drying: Measurement of Sublimation Rates for Frozen Aqueous Solutions by a Microbalance Technique. J. Pharm. Sci. 1983, 72, 635–650. DOI: https://doi.org/10.1002/jps.2600720614.
   PubMed Web of Science ®Google Scholar
• Bruttini, R.; Rovero, G.; Baldi, G. Experimentation and Modeling of Pharmaceutical Lyophilization Using a Pilot-Plant. Chem. Eng. J. Biochem. Eng. 1991, 45, B67–B77. DOI: https://doi.org/10.1016/0300-9467(91)80020-W.
   Web of Science ®Google Scholar
• Rovero, G.; Ghio, S.; Barresi, A. A. Development of a Prototype Capacitive Balance for Freeze-Drying Studies. Chem. Eng. Sci. 2001, 56, 3575–3584. DOI: https://doi.org/10.1016/S0009-2509(01)00025-2.
   Web of Science ®Google Scholar
• Roth, C.; Winter, G.; Lee, G. Continuous Measurement of Drying Rate of Crystalline and Amorphous Systems during Freeze-Drying Using an in Situ Microbalance Technique. J. Pharm. Sci. 2001, 90, 1345–1355. DOI: https://doi.org/10.1002/jps.1087.
   PubMed Web of Science ®Google Scholar
• Wiggenhorn, M.; Presser, I.; Winter, G. The Current State of PAT in Freeze-Drying. Am. Pharm. Rev. 2005, 8, 38–44.
   Google Scholar
• Barresi, A. A.; Pisano, R.; Fissore, D.; Rasetto, V.; Velardi, S. A.; Vallan, A.; Parvis, M.; Galan, M. Monitoring of the Primary Drying of a Lyophilization Process in Vials. Chem. Eng. Process. 2009, 48, 408–423. DOI: https://doi.org/10.1016/j.cep.2008.05.004.
   Web of Science ®Google Scholar
• Carullo, A.; Vallan, A. Measurement Uncertainty Issues in Freeze-Drying Processes. Measurement 2012, 45, 1706–1712. DOI: https://doi.org/10.1016/j.measurement.2012.04.017.
   Web of Science ®Google Scholar
• Patel, S. M.; Doen, T.; Pikal, M. J. Determination of End Point of Primary Drying in Freeze-Drying Process Control. AAPS PharmSciTech 2010, 11, 73–84. DOI: https://doi.org/10.1208/s12249-009-9362-7.
   PubMed Web of Science ®Google Scholar
• Salzberg, F. Pulsed Pirani Vacuum Gauge. In Proceedings of 4th International Conference on Lyophilization and Freeze-Drying, Dublin, Ireland, October 17–19, 2007.
   Google Scholar
• Bardat, A.; Biguet, J.; Chatenet, E.; Courteille, F. Moisture Measurement: A New Method for Monitoring Freeze-Drying Cycles. J. Parenter. Sci. Technol. 1993, 47, 293–299.
   PubMedGoogle Scholar
• Bouldoires, J. P. 1969 Etude expérimentale des transferts de chaleur et de masse encours de lyophilisation par mesures diélectriques et par mesure de pression de vapeur. In Proceedings of Symposium on Thermodynamic Aspects of Freeze-Drying, International Institute of Refrigeration: Cleveland.
   Google Scholar
• Genin, N.; Rene, F.; Corrieu, G. A Method for on-Line Determination of Residual Water Content and Sublimation End-Point during Freeze-Drying. Chem. Eng. Process. 1996, 35, 255–263. DOI: https://doi.org/10.1016/0255-2701(95)04131-1.
   Web of Science ®Google Scholar
• Rambhatla, S.; Ramot, R.; Bhugra, C.; Pikal, M. J. Heat and Mass Transfer Scale-up Issues during Freeze-Drying: II. Control and Characterization of the Degree of Supercooling. AAPS PharmSciTech 2004, 5, 54–59. article no. 58, DOI: https://doi.org/10.1208/pt050458.
   Web of Science ®Google Scholar
• Chouvenc, P.; Vessot, S.; Andrieu, J.; Vacus, P. Optimization of the Freeze-Frying Cycle: A New Model for Pressure Rise Analysis. Dry Technol. 2004, 22, 1577– 1601. DOI: https://doi.org/10.1081/DRT-200025605.
   Web of Science ®Google Scholar
• Trelea, I. C.; Passot, S.; Fonseca, F.; Marin, M. An Interactive Tool for the Optimization of Freeze-Drying Cycles Based on Quality Criteria. Dry Technol. 2007, 25, 741–751. DOI: https://doi.org/10.1080/07373930701370100.
   Web of Science ®Google Scholar
• Roy, M. L.; Pikal, M. J. Process Control in Freeze-Drying: Determination of the End Point of Sublimation Drying by an Electronic Moisture Sensor. J. Parenter. Sci. Technol. 1989, 43, 60–66.
   PubMedGoogle Scholar
• Jennings, T. A. Residual Gas Analysis and Vacuum Freeze Drying. J. Parenter. Drug Assoc. 1980, 34, 62–69.
   PubMedGoogle Scholar
• Willemer, H. Measurements of Temperatures, Ice Evaporation Rates and Residual Moisture Contents in Freeze-Drying. Dev. Biol. Stand. 1992, 74, 123–134.
   PubMedGoogle Scholar
• Connelly, J. P.; Welch, J. V. Monitor Lyophilization with Mass Spectrometer Gas Analysis. J. Parenter. Sci. Technol. 1993, 47, 70–75.
   PubMedGoogle Scholar
• Ganguly, A.; Stewart, J.; Rhoden, A.; Volny, M.; Saad, N. Mass Spectrometry in Freeze-Drying: Motivations for Using a Bespoke PAT for Laboratory and Production Environment. Eur. J. Pharm. Biopharm. 2018, 127, 298–308. DOI: https://doi.org/10.1016/j.ejpb.2018.02.036.
   PubMed Web of Science ®Google Scholar
• Kessler, W. J.; Davis, S. J.; Mulhall, P. A.; Finson, M. L. System for monitoring a drying process. US Patent 0208191 A1, Sep 21, 2006.
   Google Scholar
• Gieseler, H.; Kessler, W. J.; Finson, M.; Davis, S. J.; Mulhall, P. A.; Bons, V.; Debo, D. J.; Pikal, M. J. Evaluation of Tunable Diode Laser Absorption Spectroscopy for in-process water vapor mass flux measurements during freeze drying . J. Pharm. Sci. 2007, 96, 1776–1793. DOI: https://doi.org/10.1002/jps.20827.
   PubMed Web of Science ®Google Scholar
• Mayeresse, Y.; Veillon, R.; Sibille, P. H.; Nomine, C. Freeze-Drying Process Monitoring Using a Cold Plasma Ionization Device. PDA J. Pharm. Sci. Technol. 2007, 61, 160–174.
   PubMedGoogle Scholar
• Chase, D. R. Monitoring and Control of the Lyophilization Process Using a Mass Flow Controller. Pharm. Eng. 1998, 18, 11–17.
   Google Scholar
• Pisano, R.; Fissore, D.; Barresi, A. A. Noninvasive Monitoring of a Freeze-Drying Process for Tert-Butanol/Water Cosolvent-Based Formulations. Ind. Eng. Chem. Res. 2016, 55, 5670–5680. DOI: https://doi.org/10.1021/acs.iecr.5b04299.
   Web of Science ®Google Scholar
• Milton, N.; Pikal, M. J.; Roy, M. L.; Nail, S. L. Evaluation of Manometric Temperature Measurement as a Method of Monitoring Product Temperature during Lyophilization. PDA J. Pharm. Sci. Technol. 1997, 51, 7–16.
   PubMedGoogle Scholar
• Oetjen, G. W.; Haseley, P.; Klutsch, H.; Leineweber, M. Method for controlling a freeze-drying process. United States Patent 6163979, 2000.
   Google Scholar
• Liapis, A. I.; Sadikoglu, H. Dynamic Pressure Rise in the Drying Chamber as a Remote Sensing Method for Monitoring the Temperature of the Product during the Primary Drying Stage of Freeze-Drying. Dry Technol. 1998, 16, 1153– 1171. DOI: https://doi.org/10.1080/07373939808917458.
   Web of Science ®Google Scholar
• Velardi, S. A.; Rasetto, V.; Barresi, A. A. Dynamic Parameters Estimation Method: Advanced Manometric Temperature Measurement Approach for Freeze-Drying Monitoring of Pharmaceutical Solutions. Ind. Eng. Chem. Res. 2008, 47, 8445–8457. DOI: https://doi.org/10.1021/ie7017433.
   Web of Science ®Google Scholar
• Fissore, D.; Pisano, R.; Barresi, A. A. On the Methods Based on the Pressure Rise Test for Monitoring a Freeze-Drying Process. Drying Technol. 2010, 29, 73–90. DOI: https://doi.org/10.1080/07373937.2010.482715.
   Web of Science ®Google Scholar
• Pisano, R.; Fissore, D.; Barresi, A. A. A. A New Method Based on the Regression of Step Response Data for Monitoring a Freeze-Drying Cycle. J. Pharm. Sci. 2014, 103, 1756–1765. DOI: https://doi.org/10.1002/jps.23976.
   PubMed Web of Science ®Google Scholar
• Velardi, S. A.; Barresi, A. A. Development of Simplified Models for the Freeze-Drying Process and Investigation of the Optimal Operating Conditions. Chem. Eng. Res. Des. 2008, 86, 9–22. DOI: https://doi.org/10.1016/j.cherd.2007.10.007.
   Web of Science ®Google Scholar
• Pisano, R.; Fissore, D.; Velardi, S. A.; Barresi, A. A. In-Line Optimization and Control of an Industrial Freeze-Drying Process for Pharmaceuticals. J. Pharm. Sci. 2010, 99, 4691–4709. DOI: https://doi.org/10.1002/jps.22166.
   PubMed Web of Science ®Google Scholar
• Rambhatla, S.; Pikal, M. J. Heat and Mass Transfer Scale-up Issues during Freeze-Drying, I: Atypical Radiation and the Edge Vial Effect. AAPS PharmSciTech 2003, 4, 22–120. DOI: https://doi.org/10.1208/pt040214.
   Google Scholar
• Barresi, A. A.; Pisano, R.; Rasetto, V.; Fissore, D.; Marchisio, D. L. Model-Based Monitoring and Control of Industrial Freeze-Drying Processes: Effect of Batch Nonuniformity. Dry Technol. 2010, 28, 577–590. DOI: https://doi.org/10.1080/07373931003787934.
   Web of Science ®Google Scholar