References
- Guo, X. L.; Lin, Y. B.; Na, B.; Liang, X. Y.; Ekevad, M.; Ji, F. T.; Huang, L. L. Evaluation of Physical and Mechanical Properties of Fiber-Reinforced Poplar Scrimber. Bioresources 2016, 12, 43–55. DOI: https://doi.org/10.15376/biores.12.1.43-55.
- Zhang, Y.; Huang, X. A.; Zhang, Y.; Yu, Y.; Yu, W. Scrimber Board (SB) Manufacturing by a New Method and Characterization of SB's Mechanical Properties and Dimensional Stability. Holz 2018, 72, 283–289. DOI: https://doi.org/10.1515/hf-2017-0071.
- Chung, M. J.; Wang, S. Y. Effects of Peeling and Steam-Heating Treatment on Mechanical Properties and Dimensional Stability of Oriented Phyllostachys Makinoi and Phyllostachys Pubescens Scrimber Boards. J. Wood Sci. 2018, 64, 625–634. DOI: https://doi.org/10.1007/s10086-018-1731-y.
- Yu, H. X.; Fang, C. R.; Xu, M. P.; Guo, F. Y.; Yu, W. J. Effects of Density and Resin Content on the Physical and Mechanical Properties of Scrimber Manufactured from Mulberry Branches. J. Wood Sci 2015, 61, 159–164. DOI: https://doi.org/10.1007/s10086-014-1455-6.
- Li, Z.; He, M. J.; Tao, D.; Li, M. L. Experimental Buckling Performance of Scrimber Composite Columns under Axial Compression. Compos. B – Eng. 2016, 86, 203–213. DOI: https://doi.org/10.1016/j.compositesb.2015.10.023.
- He, M. J.; Zhang, J.; Li, Z.; Li, M. L. Production and Mechanical Performance of Scrimber Composite Manufactured from Poplar Wood for Structural Applications. J. Wood Sci. 2016, 62, 429–440. DOI: https://doi.org/10.1007/s10086-016-1568-1.
- Wei, J. G.; Lin, Q. Q.; Zhang, Y. H.; Yu, W. J.; Hse, C. Y.; Shupe, T. Surface Properties of Pine Scrimber Panels with Varying Density. Coatings 2019, 9, 397. DOI: https://doi.org/10.3390/coatings9060397.
- Sun, B. L.; Wang, X. H.; Liu, J. L. Changes in Dimensional Stability and Mechanical Properties of Eucalyptus Pellita by Melamine-Urea-Formaldehyde Resin Impregnation and Heat Treatment. Eur. J. Wood Prod. 2013, 71, 557–562. DOI: https://doi.org/10.1007/s00107-013-0700-9.
- Yu, Y. L.; Zhu, R. X.; Wu, B. L.; Hu, Y. A.; Yu, W. J. Fabrication, Material Properties, and Application of Bamboo Scrimber. Wood Sci. Technol. 2015, 49, 83–98. DOI: https://doi.org/10.1007/s00226-014-0683-7.
- Bao, Y.; Zhou, Y. Comparative Study of Moisture Absorption and Dimensional Stability of Chinese Cedar Wood with Conventional Drying and Superheated Steam Drying. Dry. Technol. 2017, 35, 860–866. DOI: https://doi.org/10.1080/07373937.2016.1222417.
- Korkut, S.; Budakci, M. Effect of High-Temperature Treatment on the Mechanical Properties of Rowan (Sorbus Aucuparia L.) Wood. Dry. Technol. 2009, 27, 1240–1247. DOI: https://doi.org/10.1080/07373930903267161.
- Shams, I.; Yano, H.; Endou, K. Compressive Deformation of Wood Impregnated with Low Molecular Weight Phenol Formaldehyde (PF) Resin I: Effects of Pressing Pressure and Pressure Holding. J. Wood Sci. 2004, 50, 337–342. DOI: https://doi.org/10.1007/s10086-003-0570-6.
- Ozsahin, S.; Aydin, I. Prediction of the Optimum Veneer drying temperature for Good Bonding in Plywood Manufacturing by Means of Artificial Neural Network. Wood Sci. Technol. 2014, 48, 59–70. DOI: https://doi.org/10.1007/s00226-013-0583-2.
- Aydin, I.; Colakoglu, G. Formaldehyde Emission, Surface Roughness, and Some Properties of Plywood as Function of Veneer Drying Temperature. Dry. Technol. 2005, 23, 1107–1117. DOI: https://doi.org/10.1081/DRT-200059142.
- Theppaya, T.; Prasertsan, S. Optimization of Rubber Wood Drying by Response Surface Method and Multiple Contour Plots. Dry. Technol. 2004, 22, 1637–1660. DOI: https://doi.org/10.1081/DRT-200025622.
- Guan, M. J.; Zhang, Y.; Chen, X. W.; Yang, S. R.; Yong, C. Fluorescence Microscopy Characterization of the Bonding Interface of Scrimbers Made of Alkali-Treated Finely Fluffed Poplar Veneers. Bioresources 2019, 14, 5900–5907. DOI: https://doi.org/10.15376/biores.14.3.5900-5907.
- Wei, Y. A.; Huang, Y. X.; Yu, Y. L.; Gao, R. Q.; Yu, W. J. The Surface Chemical Constituent Analysis of Poplar Fibrosis Veneers during Heat Treatment. J. Wood Sci. 2018, 64, 485–500. DOI: https://doi.org/10.1007/s10086-018-1732-x.
- Han, C.; Zhan, T.; Xu, J.; Jiang, J.; Lu, J. Process Optimization for Multi-Veneer Hot-Press Drying. Dry. Technol. 2015, 33, 735–741. DOI: https://doi.org/10.1080/07373937.2014.983243.
- Yong, A. C. C.; Tahir, P. M.; Karimi, A.; Bakar, E. S.; Abdan, K.; Ibrahim, A.; Abd Halip, J. Pre-Drying Optimization of Oil Palm Veneers by Response Surface Methodology. Eur. J. Wood Prod. 2015, 73, 493–498. DOI: https://doi.org/10.1007/s00107-015-0893-1.
- Aydin, I.; Colakoglu, G. Variations in Bending Strength and Modulus of Elasticity of Spruce and Alder Plywood after Steaming and High Temperature Drying. Mech. Adv. Mater. Struct. 2008, 15, 371–374. DOI: https://doi.org/10.1080/15376490801977692.
- Huang, H.; Wang, B. J.; Dong, L.; Zhao, M. Wettability of Hybrid Poplar Veneers with Cold Plasma Treatments in Relation to Drying Conditions. Dry. Technol 2011, 29, 323–330. DOI: https://doi.org/10.1080/07373937.2010.496133.
- Shmulsky, R. Effect of Water Spray Log Storage on Southern Pine Veneer Drying. Dry. Technol. 2001, 19, 1157–1162. DOI: https://doi.org/10.1081/DRT-100104811.
- Hong, S.; Gu, Z.; Chen, L.; Zhu, P.; Lian, H. Synthesis of Phenol Formaldehyde (PF) Resin for Fast Manufacturing Laminated Veneer Lumber (LVL). Holz 2018, 72, 745–752. DOI: https://doi.org/10.1515/hf-2017-0184.
- Kol, H. S.; Altun, S. Effect of Some Chemicals on Thermal Conductivity of Impregnated Laminated Veneer Lumbers Bonded with Poly(Vinyl Acetate) and Melamine-Formaldehyde Adhesives. Dry. Technol. 2009, 27, 1010–1016. DOI: https://doi.org/10.1080/07373930902905092.
- Paunesku, T.; Vogt, S.; Maser, J.; Lai, B.; Woloschak, G. X-Ray Fluorescence Microprobe Imaging in Biology and Medicine. J. Cell Biochem. 2006, 99, 1489–1502. DOI: https://doi.org/10.1002/jcb.21047.
- Paris, J. L.; Kamke, F. A.; Mbachu, R.; Gibson, S. K. Phenol Formaldehyde Adhesives Formulated for Advanced X-Ray Imaging in Wood-Composite Bondlines. J. Mater. Sci. 2014, 49, 580–591. DOI: https://doi.org/10.1007/s10853-013-7738-2.
- Vogt, S. MAPS: A Set of Software Tools for Analysis and Visualization of 3D X-Ray Fluorescence Data Sets. J. Phys. IV France. 2003, 104, 635–638. DOI: https://doi.org/10.1051/jp4:20030160.
- Ramezanpour, M.; Tarmian, A.; Taghiyari, H. R. Improving Impregnation Properties of Fir Wood to Acid Copper Chromate (ACC) with Microwave Pre-Treatment. iForest 2015, 8, 89–94. DOI: https://doi.org/10.3832/ifor1119-007.
- Qin, Y.; Dong, Y.; Li, J. Effect of Modification with Melamine-Urea-Formaldehyde Resin on the Properties of Eucalyptus and Poplar. J. Wood Chem. Technol. 2019, 39, 360–371. DOI: https://doi.org/10.1080/02773813.2019.1636821.
- Anwar, U. M. K.; Paridah, M. T.; Hamdan, H.; Bakar, S. E.; Sapuan, S. M. Impregnation and Drying Process of Bamboo Strips Treated with Low Molecular Weight Phenol Formaldehyde (LMwPF) Resin. J. Polym. Mater. 2008, 25, 265–273.
- Bekhta, P.; Ortynska, G.; Sedliacik, J. Properties of Modified Phenol-Formaldehyde Adhesive for Plywood Panels Manufactured from High Moisture Content Veneer. Drvna Ind. 2014, 65, 293–301. DOI: https://doi.org/10.5552/drind.2014.1350.
- Xu, K.; Lu, J.; Gao, Y.; Wu, Y.; Li, X. Determination of Moisture Content and Moisture Content Profiles in Wood during Drying by Low-Field Nuclear Magnetic Resonance. Dry. Technol. 2017, 35, 1909–1918. DOI: https://doi.org/10.1080/07373937.2017.1291519.
- Ab Wahab, N. H.; Tahir, P. M.; Yunus, N. Y. M.; Ashaari, Z.; Yong, A. C. C.; Ibrahim, N. A. Influence of Resin Molecular Weight on Curing and Thermal Degradation of Plywood Made from Phenolic Prepreg Palm Veneers. J. Adhes. 2014, 90, 210–229. DOI: https://doi.org/10.1080/00218464.2013.780971.
- Uysal, B. Effects of the Steam Test on Bonding Strength of Laminated Veneer Lumbers Manufactured by Using Different Adhesives. J. Appl. Polym. Sci. 2006, 99, 2973–2977. DOI: https://doi.org/10.1002/app.22996.
- Klüppel, A.; Mai, C. The Influence of Curing Conditions on the Chemical Distribution in Wood Modified with Thermosetting Resins. Wood Sci. Technol. 2013, 47, 643–658. DOI: https://doi.org/10.1007/s00226-013-0530-2.
- Bliem, P.; Konnerth, J.; Fromel-Frybort, S.; Gartner, C.; Mauritz, R.; van Herwijnen, H. W. G. Influence of Drying and Curing Parameters on Phenol-Formaldehyde Impregnated Wood Veneers. J. Adhes. 2020, 96, 253–271. DOI: https://doi.org/10.1080/00218464.2019.1657015.