References
- Abdulrahman, M. W. CFD Simulations of Direct Contact Volumetric Heat Transfer Coefficient in a Slurry Bubble Column at a High Gas Temperature of a Helium–Water–Alumina System. Appl. Therm. Eng. 2016, 99, 224–234. DOI: https://doi.org/10.1016/j.applthermaleng.2016.01.043.
- Mahood, H. B.; Campbell, A. N.; Thorpe, R. B.; Sharif, A. O. Measuring the Overall Volumetric Heat Transfer Coefficient in a Vapor-Liquid–Liquid Three-Phase Direct Contact Heat Exchanger. Heat Transfer Eng. 2018, 39, 208–216. DOI: https://doi.org/10.1080/01457632.2017.1295736.
- Mahood, H. B.; Sharif, A. O.; Thorpe, R. B. Transient Volumetric Heat Transfer Coefficient Prediction of a Three-Phase Direct Contact Condenser. Heat Mass Transfer 2015, 51, 165–170. DOI: https://doi.org/10.1007/s00231-014-1403-4.
- Baqir, A. S.; Mahood, H. B.; Campbell, A. N.; Griffiths, A. J. Measuring the Average Volumetric Heat Transfer Coefficient of a Liquid–Liquid–Vapour Direct Contact Heat Exchanger. Appl. Therm. Eng. 2016, 103, 47–55. DOI: https://doi.org/10.1016/j.applthermaleng.2016.04.067.
- Fu, X.; Viskanta, R.; Gore, J. P. Measurement and Correlation of Volumetric Heat Transfer Coefficients of Cellular Ceramics. Exp. Therm. Fluid Sci. 1998, 17, 285–293. DOI: https://doi.org/10.1016/S0894-1777(98)10002-X.
- Zhang, H. Y.; Huang, X. Y. Volumetric Heat Transfer Coefficients in Solid–Fluid Porous Media: Closure Problem, Thermal Analysis and Model Improvement with Fluid Flow. Int. J. Heat Mass Transf. 2000, 43, 3417–3432. DOI: https://doi.org/10.1016/S0017-9310(99)00370-1.
- Mujumdar, Arun, S. Handbook of Industrial Drying, 3rd ed.; Taylor & Francis Group, LLC: New York, 2006; p 1312.
- Keey, R. B. Introduction to Industrial Drying Operations, 1st ed.; Pergamon Press: New York, 1978; p 376.
- Pang, S. External Heat and Mass Transfer Coefficients for Kiln Drying of Timber. Drying Technol. 1996, 14, 859–871. DOI: https://doi.org/10.1080/07373939608917128.
- Vega, R. E.; Alvarez, P. I.; Canales, E. R. Dimensionless Correlation for the Heat Transfer Coefficient in a Batch-Indirect Rotary Drier. Drying Technol. 2000, 18, 2351–2367. DOI: https://doi.org/10.1080/07373930008917846.
- Bjorn, W.; Stig, S. Heat and Mass Transfer Coefficients in Computer Simulation of Paper Drying. Drying Technol. 1995, 13, 959–975.
- Kitron, A.; Buchmann, R.; Luzzatto, K.; Tamir, A. Drying and Mixing of Solids and Particles. Residence Times Distributions in Four Impinging Streams and Multistage Two Impinging Streams Reactors. Ind. Eng. Chem. Res. 1987, 26, 2454–2461. DOI: https://doi.org/10.1021/ie00072a012.
- Poós, T.; Szabó, V. Application of Mathematical Models Using Volumetric Transfer Coefficients in Fluidized Bed Dryers. Energy Proc. 2017, 112, 374–381. DOI: https://doi.org/10.1016/j.egypro.2017.03.1079.
- Poós, T.; Szabó, V. Volumetric Heat Transfer Coefficient in Fluidized‐Bed Dryers. Chem. Eng. Technol. 2018, 41, 628–636. DOI: https://doi.org/10.1002/ceat.201700038.
- Poós, T.; Szabó, V. Determination of Entry Length of a Fluidized Bed Dryer Using Volumetric Heat Transfer Coefficient. Int. Rev. Appl. Sci. Eng. 2017, 8, 57–65. DOI: https://doi.org/10.1556/1848.2017.8.1.9.
- Zahed, A.; Singh, R. Convective Heat Transfer Coefficient in a Packed Bed of Rice. Eng. Sci. 1989, 1, 11–20. DOI: https://doi.org/10.4197/Eng.1-1.2.
- Alvarez, P. I.; Shene, C. Experimental Determination of Volumetric Heat Transfer Coefficient in a Rotary Dryer. Drying Technol. 1994, 12, 1605–1627. DOI: https://doi.org/10.1080/07373939408962189.
- Hirosue, H. Influence of Particles Falling from Flights on Volumetric Heat Transfer Coefficient in Rotary Dryers and Coolers. Powder Technol. 1989, 59, 125–128. DOI: https://doi.org/10.1016/0032-5910(89)80036-1.
- Ranz, W. E.; Marshall, W. R. Evaporation from Drops. Chem. Eng. Prog. 1952, 48, 173–180.
- Tomiyama, A. Struggle with Computational Bubble Dynamics. Multiphase Sci. Technol. 1998, 10, 369–405.
- Hughmark, G. A. Mass and Heat Transfer from Rigid Spheres. AIChE J. 1967, 13, 1219–1221. DOI: https://doi.org/10.1002/aic.690130638.
- Birchal, V. S.; Huang, L.; Mujumdar, A. S.; Passos, M. L. Spray Dryers: Modeling and Simulation. Drying Technol. 2006, 24, 359–371. DOI: https://doi.org/10.1080/07373930600564431.
- Wawrzyniak, P.; Podyma, M.; Zbicinski, I.; Bartczak, Z.; Polanczyk, A.; Rabaeva, J. Model of Heat and Mass Transfer in an Industrial Counter-Current Spray-Drying Tower. Drying Technol. 2012, 30, 1274–1282. DOI: https://doi.org/10.1080/07373937.2012.704604.
- Zbicinski, I.; Grad, J.; Strumillo, C. Effect of Turbulence on Heat and Mass Transfer in the Atomization Zone. Drying Technol. 1996, 14, 231–244. DOI: https://doi.org/10.1080/07373939608917094.
- Chen, X. D. Heat-Mass Transfer and Structure Formation during Drying of Single Food Droplets. Drying Technol. 2004, 22, 179–190. DOI: https://doi.org/10.1081/DRT-120028226.
- Zbiciński, I. Development and Experimental Verification of Momentum, Heat and Mass Transfer Model in Spray Drying. Chem. Eng. J. Biochem. Eng. J. 1995, 58, 123–133. DOI: https://doi.org/10.1016/0923-0467(94)02943-1.
- Dlouhy, J.; Gauvin, W. H. Heat and Mass Transfer in Spray Drying. AIChE J. 1960, 6, 29–34. DOI: https://doi.org/10.1002/aic.690060106.
- Dalmaz, N.; Ozbelge, H. O.; Eraslan, A. N.; Uludag, Y. Heat and Mass Transfer Mechanisms in Drying of a Suspension Droplet: A New Computational Model. Drying Technol. 2007, 25, 391–400. DOI: https://doi.org/10.1080/07373930601184569.
- Nguyen, D. Q.; Mounir, S.; Allaf, K. Optimization of the Spray Drying Operating Conditions for Producing the Powder Mixture of Gum Arabic and Maltodextrin. Int. J. Food Eng. 2017, 13, 20160271. DOI: https://doi.org/10.1515/ijfe-2016-0271.
- Nguyen, D. Q.; Nguyen, T. H.; Mounir, S.; Allaf, K. Effect of Feed Concentration and Inlet Air Temperature on the Properties of Soymilk Powder Obtained by Spray Drying. Drying Technol. 2018, 36, 817–829. DOI: https://doi.org/10.1080/07373937.2017.1357040.
- Masters, K. Spray Drying Handbook; Longman Scientific & Technical: New York, 1991; p 725.
- Alam, A.; Shove, G. C. Hygroscopicity and Thermal Properties of Soybeans. Trans. ASAE 1973, 16, 707–709.
- Toro-Vazquez, J. F.; Briceño-Montelongo, M.; Dibildox-Alvarado, E.; Charó-Alonso, M.; Reyes-Hernández, J. Crystallization Kinetics of Palm Stearin in Blends with Sesame Seed Oil. J. Amer. Oil Chem. Soc. 2000, 77, 297–310. DOI: https://doi.org/10.1007/s11746-000-0049-x.
- Woods, D. R.; Hrymak, A. N.; Couper, J. R. Conceptual Process Design, Process Improvement, and Troubleshooting. In Albright's Chemical Engineering Handbook; Albright, L., Ed.; CRC Press: New York, 2008; pp 1267–1436.
- Kudra, T.; Mujumdar, A. S. Special Drying Techniques and Novel Dryers. In Handbook of Industrial Drying, 3rd ed.; Mujumdar, A. S., Ed.; Taylor & Francis Group, LLC: New York, 2006; pp 454–514.
- Hirose, Y.; Hazama, H. A Suggested System for Making Fuel from Sewage Sludge. Kagaku-Kogaku Ronbunshu 1983, 9, 583–586.