References
- Minea, V. Drying Heat Pumps – Part II: Agro-Food, Biological and Wood Products. Int. J. Refrig.-Rev. Int. Froid. 2013, 36, 659–673. DOI: https://doi.org/10.1016/j.ijrefrig.2012.11.026.
- Tunckal, C.; Doymaz, İ. Performance Analysis and Mathematical Modelling of Banana Slices in a Heat Pump Drying System. Renew. Energy 2020, 150, 918–923. DOI: https://doi.org/10.1016/j.renene.2020.01.040.
- Pattanayak, B.; Mohapatra, S. S.; Das, H. C. Energy and Exergy Analyses of Paddy Drying Process in a Vertical Fluidised Bed Dryer. IJEX 2019, 28, 113–125. DOI: https://doi.org/10.1504/IJEX.2019.097975.
- Defendi, R. O.; Paraíso, P. R.; Jorge, L. M. d M. Optimization Study of Soybean Intermittent Drying in Fixed-Bed Drying Technology. Drying Technol. 2017, 35, 125–137. DOI: https://doi.org/10.1080/07373937.2016.1162171.
- Beigi, M.; Tohidi, M.; Torki-Harchegani, M. Exergetic Analysis of Deep-Bed Drying of Rough Rice in a Convective Dryer. Energy 2017, 140, 374–382. DOI: https://doi.org/10.1016/j.energy.2017.08.100.
- Shamsuddeen, M. M.; Cha, D.-A.; Kim, S.-C.; Kim, J.-H. Effects of Decompression Condition and Temperature on Drying Rate in a Hybrid Heat Pump Decompression Type Dryer Used for Seafood Drying. Drying Technol. 2020, 1–15. DOI: https://doi.org/10.1080/07373937.2020.1756842.
- Chavan, A.; Vitankar, V.; Mujumdar, A.; Thorat, B. Natural Convection and Direct Type (NCDT) Solar Dryers: A Review. Drying Technol. 2020, 1–22. DOI: https://doi.org/10.1080/07373937.2020.1753065.
- Aktaş, M.; Khanlari, A.; Aktekeli, B.; Amini, A. Analysis of a New Drying Chamber for Heat Pump Mint Leaves Dryer. Int. J. Hydrogen Energy 2017, 42, 18034–18044. DOI: https://doi.org/10.1016/j.ijhydene.2017.03.007.
- Goh, L. J.; Othman, M. Y.; Mat, S.; Ruslan, H.; Sopian, K. Review of Heat Pump Systems for Drying Application. Renew. Sust. Energy Rev. 2011, 15, 4788–4796. DOI: https://doi.org/10.1016/j.rser.2011.07.072.
- Qu, M.; Xia, L.; Deng, S.; Jiang, Y. A Study of the Reverse Cycle Defrosting Performance on a Multi-Circuit Outdoor Coil Unit in an Air Source Heat Pump – Part I: Experiments. Appl. Energy 2012, 91, 122–129. DOI: https://doi.org/10.1016/j.apenergy.2011.08.034.
- Tambunan, A. H.; Manalu, L. P.; Abdullah, K. Exergy Analysis on Simultaneous Charging and Discharging of Solar Thermal Storage for Drying Application. Drying Technol. 2010, 28, 1107–1112. DOI: https://doi.org/10.1080/07373937.2010.506171.
- Rabha, D. K.; Muthukumar, P.; Somayaji, C. Energy and Exergy Analyses of the Solar Drying Processes of Ghost Chilli Pepper and Ginger. Renew. Energy 2017, 105, 764–773. DOI: https://doi.org/10.1016/j.renene.2017.01.007.
- Shen, J.; Guo, T.; Tian, Y.; Xing, Z. Design and Experimental Study of an Air Source Heat Pump for Drying with Dual Modes of Single Stage and Cascade Cycle. Appl. Therm. Eng. 2018, 129, 280–289. DOI: https://doi.org/10.1016/j.applthermaleng.2017.10.047.
- Colak, N.; Hepbasli, A. A Review of Heat Pump Drying: Part 1 – Systems, Models and Studies. Energy Conv. Manag. 2009, 50, 2180–2186. DOI: https://doi.org/10.1016/j.enconman.2009.04.031.
- Hou, H.; Chen, Q.; Bi, J.; Wu, X.; Jin, X.; Li, X.; Qiao, Y.; Lyu, Y. Understanding Appearance Quality Improvement of Jujube Slices during Heat Pump Drying via Water State and Glass Transition. J. Food Eng. 2020, 272, 109874. DOI: https://doi.org/10.1016/j.jfoodeng.2019.109874.
- Cranston, J.; Askalany, A.; Santori, G. Efficient Drying in Washer Dryers by Combining Sorption and Heat Pumping. Energy 2019, 183, 683–692. DOI: https://doi.org/10.1016/j.energy.2019.06.141.
- Wang, M.; Deng, C.; Wang, Y.; Feng, X. Exergoeconomic Performance Comparison, Selection and Integration of Industrial Heat Pumps for Low Grade Waste Heat Recovery. Energy Conv. Manag. 2020, 207, 112532. DOI: https://doi.org/10.1016/j.enconman.2020.112532.
- Zhang, G.; Wang, B.; Li, X.; Shi, W.; Cao, Y. Review of Experimentation and Modeling of Heat and Mass Transfer Performance of Fin-and-Tube Heat Exchangers with Dehumidification. Appl. Therm. Eng. 2019, 146, 701–717. DOI: https://doi.org/10.1016/j.applthermaleng.2018.10.032.
- Wang, C.-C. On the Heat and Mass Analogy of Fin-and-Tube Heat Exchanger. Int. J. Heat Mass Transf. 2008, 51, 2055–2059. DOI: https://doi.org/10.1016/j.ijheatmasstransfer.2007.06.007.
- Chu, W.-X.; Sheu, W.-J.; Hsu, C.-C.; Wang, C.-C. Airside Performance of Sinusoidal Wavy Fin-and-Tube Heat Exchangers Subject to Large-Diameter Tubes with Round or Oval Configuration. Appl. Therm. Eng 2020, 164, 114469. DOI: https://doi.org/10.1016/j.applthermaleng.2019.114469.
- Pirompugd, W.; Wongwises, S.; Wang, C.-C. Simultaneous Heat and Mass Transfer Characteristics for Wavy Fin-and-Tube Heat Exchangers under Dehumidifying Conditions. Int. J. Heat Mass Transf. 2006, 49, 132–143. [Database] DOI: https://doi.org/10.1016/j.ijheatmasstransfer.2005.05.043.
- Kim, N.-H.; Lee, K.-J.; Jeong, Y.-B. Airside Performance of Oval Tube Heat Exchangers Having Sine Wave Fins under Wet Condition. Appl. Therm. Eng. 2014, 66, 580–589. DOI: https://doi.org/10.1016/j.applthermaleng.2014.02.042.
- Chung, Y.; Yoo, J. W.; Kim, G. T.; Kim, M. S. Prediction of the Frost Growth and Performance Change of Air Source Heat Pump System under Various Frosting Conditions. Appl. Therm. Eng. 2019, 147, 410–420. DOI: https://doi.org/10.1016/j.applthermaleng.2018.10.085.
- Zhang, L.; Jiang, Y.; Dong, J.; Yao, Y.; Deng, S. An Experimental Study on the Effects of Frosting Conditions on Frost Distribution and Growth on Finned Tube Heat Exchangers. Int. J. Heat Mass Transf. 2019, 128, 748–761. DOI: https://doi.org/10.1016/j.ijheatmasstransfer.2018.09.016.
- Lucas, F.; Adelard, L.; Garde, F.; Boyer, H. Study of Moisture in Buildings for Hot Humid Climates. Energy Build. 2002, 34, 345–355. DOI: https://doi.org/10.1016/S0378-7788(01)00115-3.