References
- Scrosati, B.; Garche, J. Lithium Batteries: Status, Prospects and Future. J. Power Sources 2010, 195, 2419–2430. DOI: https://doi.org/10.1016/j.jpowsour.2009.11.048.
- Blomgren, G. E. The Development and Future of Lithium Ion Batteries. J. Electrochem. Soc. 2017, 164, A5019–A5025. DOI: https://doi.org/10.1149/2.0251701jes.
- Whittingham, M. S. Lithium Batteries and Cathode Materials. Chem. Rev. 2004, 104, 4271–4301. DOI: https://doi.org/10.1021/cr020731c.
- Marom, R.; Amalraj, S. F.; Leifer, N.; Jacob, D.; Aurbach, D. A Review of Advanced and Practical Lithium Battery Materials. J. Mater. Chem. 2011, 21, 9938–9954. DOI: https://doi.org/10.1039/c0jm04225k.
- Goodenough, J. B.; Park, K. S. The Li-Ion Rechargeable Battery: A Perspective. J. Am. Chem. Soc. 2013, 135, 1167–1176. DOI: https://doi.org/10.1021/ja3091438.
- Schönemann, M. Chapter 2, Multiscale Simulation Approach for Battery Production Systems. In Sustainable Production, Life Cycle Engineering and Management. Springer International Publishing, 2017. DOI: https://doi.org/10.1007/978-3-319-49367-1_2.
- Wood, D. L.; III, Li, J.; Daniel, C. Prospects for Reducing the Processing Cost of Lithium Ion Batteries. J. Power Sources 2015, 275, 234–242. DOI: https://doi.org/10.1016/j.jpowsour.2014.11.019.
- Kim, K. M.; Jeon, W. S.; Chung, I. J.; Chang, S. H. Effect of Mixing Sequences on the Electrode Characteristics of Lithium-Ion Rechargeable Batteries. J. Power Sources 1999, 83, 108–113. DOI: https://doi.org/10.1016/S0378-7753(99)00281-5.
- Wenzel, V.; Nirschl, H.; Nötzel, D. Challenges in Lithium-Ion-Battery Slurry Preparation and Potential of Modifying Electrode Structures by Different Mixing Processes. Energy Technol. 2015, 3, 692–698. DOI: https://doi.org/10.1002/ente.201402218.
- Wood, D. L.; Quass, J. D.; Li, J.; Ahmed, S.; Ventola, D.; Daniel, C. Technical and Economic Analysis of Solvent-Based Lithium-Ion Electrode Drying with Water and NMP. Drying Technol. 2018, 36, 234–244. 1319855. DOI: https://doi.org/10.1080/07373937.2017.
- Lazar, M. L.; Sloan, B.; Carlson, S.; Lucht, B. L. Analysis of Integrated Electrode Stacks for Lithium Ion Batteries. J. Power Sources 2014, 251, 476–479. DOI: https://doi.org/10.1016/j.jpowsour.2013.11.065.
- Shroofy, M. A.; Zhang, Q.; Xu, J.; Chen, T.; Kaur, A. P.; Cheng, Y. T. Solvent-Free Dry Powder Coating Process for Low-Cost Manufacturing of LiNi 1/3Mn1/3Co1/3O2 Cathodes in Lithium-Ion Batteries. J. Power Sources 2017, 352, 187–193. DOI: https://doi.org/10.1016/j.jpowsour.2017.03.131.
- Vertruyen, B.; Eshraghi, N.; Piffet, C.; Bodart, J.; Mahmoud, A.; Boschini, F. Spray-Drying of Electrode Materials for Lithium- and Sodium-Ion Batteries. Materials 2018, 11, 1076. DOI: https://doi.org/10.3390/ma11071076.
- Arpagaus, C.; Collenberg, A.; Rütti, D. Laboratory Spray Drying of Materials for Batteries, Lasers, and Bioceramics. Drying Technol. 2019, 37, 426–434. DOI: https://doi.org/10.1080/07373937.2017.1410487.
- Jaiser, S.; Kumberg, J.; Klaver, J.; Urai, J. L.; Schabel, W.; Schmatz, J.; Scharfer, P. Microstructure Formation of Lithium-Ion Battery Electrodes during Drying-An Ex-Situ Study Using Cryogenic Broad Ion Beam Slope Cutting and Scanning Electron Microscopy (Cryo-BIB-SEM). J. Power Sources 2017, 345, 97–107. 01.117. DOI: https://doi.org/10.1016/j.jpowsour.2017.
- Jaiser, S.; Salach, N. S.; Baunach, M.; Scharfer, P.; Schabel, W. The Impact of Drying Conditions and Wet Film Properties on Adhesion and Film Solidification of Lithium Ion Battery Anodes. Drying Technol. 2017, 35, 1807–1817. DOI: https://doi.org/10.1080/07373937.2016.1276584.
- Baunach, M.; Jaiser, S.; Schmelzle, S.; Nirschl, H.; Scharfer, P.; Schabel, W. Delamination Behavior of Lithium-Ion Battery Anodes: Influence of Drying Temperature during Electrode Processing. Drying Technol. 2016, 34, 462–473. DOI: https://doi.org/10.1080/07373937.2015.1060497.
- Westphal, B. G.; Bockholt, H.; Gunther, T.; Haselrieder, W.; Kwade, A. Influence of Convective Drying Parameters on Electrode Performance and Physical Electrode Properties. ECS Trans. 2015, 64, 57–68. DOI: https://doi.org/10.1149/06422.0057ecst.
- Jaiser, S.; Funk, L.; Baunach, M.; Scharfer, P.; Schabel, W. Experimental Investigation into Battery Electrode Surfaces: The Distribution of Liquid at the Surface and the Emptying of Pores during Drying. J. Colloid Interface Sci. 2017, 494, 22–31. DOI: https://doi.org/10.1016/j.jcis.2017.01.063.
- Jaiser, S.; Friske, A.; Baunach, M.; Scharfer, P.; Schabel, W. Development of a Three-Stage Drying Profile Based on Characteristic Drying Stages for Lithium-Ion Battery Anodes. Drying Technol. 2017, 35, 1266–1275. DOI: https://doi.org/10.1080/07373937.2016.1248975.
- Susarla, N.; Ahmed, S.; Dees, D. W. Modeling and Analysis of Solvent Removal during Li-Ion Battery Electrode Drying. J. Power Sources 2018, 378, 660–670. DOI: https://doi.org/10.1016/j.jpowsour.2018.01.007.
- Stein, I. V.; Mistry, M.; Mukherjee, A.; Mechanistic, P. P. Understanding of the Role of Evaporation in Electrode Processing. J. Electrochem. Soc. 2017, 164, A1616–A1627. DOI: https://doi.org/10.1149/2.1271707jes.
- Datta, A. K. Porous Media Approaches to Studying Simultaneous Heat and Mass Transfer in Food Processes. I: Problem Formulations. J. Food Eng. 2007, 80, 80–95. DOI: https://doi.org/10.1016/j.jfoodeng.2006.05.013.
- Bemada, P.; Bruneau, D. Drying of a Paper Coating: Experimental Study and Modeling. Drying Technol. 1997, 15, 2061–2087. DOI: https://doi.org/10.1080/07373939708917352.
- Vieira, M. G. A.; Estrella, L.; Silva, M. A.; Roch, S. C. S. Shrinkage of Recycled Paper Sheet during Drying. Drying Technol. 2006, 24, 465–474. DOI: https://doi.org/10.1080/07373930600611943.
- Haluschak, E.; Hazamuddin, H.; McGee, J. P.; Sun, Z.; Martinez, E. N. The Drying of Spent Coffee Grounds in a Tray Drier. AJBSR. 2019, 6, 416–425. AJBSR.MS.ID.001074. DOI: https://doi.org/10.34297/AJBSR.2019.06.001074.
- Chemkhi, S.; Jomaa, W.; Zagrouba, F. Application of a Coupled Thermo-Hydro-Mechanical Model to Simulate the Drying of Non Saturated Porous Media. Drying Technol. 2009, 27, 842–850. DOI: https://doi.org/10.1080/07373930903021477.
- Kaya, A.; Aydin, O.; Demirtaş, C. Concentration Boundary Conditions in the Theoretical Analysis of Convective Drying Process. J. Food Process Eng. 2007, 30, 564–577. DOI: https://doi.org/10.1111/j.1745-4530.2007.00131.x.
- Harchegani, M. T.; Ghanbarian, D.; Sadeghi, M. Estimation of Whole Lemon Mass Transfer Parameters during Hot Air Drying Using Different Modeling Methods. Heat Mass Transfer. 2015, 51, 1121–1129. DOI: https://doi.org/10.1007/s00231-014-1483-1.
- Vorhauer, N.; Metzger, T.; Tsotsas, E. Empirical Macroscopic Model for Drying of Porous Media Based on Pore Networks and Scaling Theory. Drying Technol. 2010, 28, 991–1000. DOI: https://doi.org/10.1080/07373937.2010.497088.
- Parisotto, E. I. B.; Teleken, J. T.; Laurindo, J. B.; Carciofi, B. A. M. Mathematical Modeling and Experimental Assessment of the Cast-Tape Drying. Drying Technol. 2020, 38, 1024–1035. DOI: https://doi.org/10.1080/07373937.2019.1610768.
- Mujumdar, A. S., Ed. Handbook of Industrial Drying, 4th ed. CRC Publication, Taylor & Francis Group, LLC: Baco Raton, FL, 2015.
- Chen, X. D. A Discussion on a Generalized Correlation for Drying Rate Modeling. Drying Technol. 2005, 23, 415–426. DOI: https://doi.org/10.1081/DRT-200054114.
- Yiotis, A. G.; Tsimpanogiannis, I. N.; Stubos, A. K.; Yortsos, Y. C. Pore-Network Study of the Characteristic Periods in the Drying of Porous Materials. J. Colloid Interface Sci. 2006, 297, 738–748. DOI: https://doi.org/10.1016/j.jcis.2005.11.043.
- Yiotis, A. G.; Tsimpanogiannis, I. N.; Stubos, A. K.; Yortsos, Y. C. Coupling between External and Internal Mass Transfer during Drying of a Porous Medium. Water Resour. Res. 2007, 43, W06403. DOI: https://doi.org/10.1029/2006WR005558.
- Coussot, P. Scaling Approach of the Convective Drying of a Porous Medium. Eur. Phys. J. B. 2000, 15, 557–566. DOI: https://doi.org/10.1007/s100510051160.
- Silva, M. A. A General Model for Moving Boundary Problems-Application to Drying of Porous Media. Drying Technol. 2000, 18, 601–624. DOI: https://doi.org/10.1080/07373930008917728.
- Crank, J. The Mathematics of Diffusion, 2nd ed. Oxford University Press: London, 1975.
- Gekas, V.; Lamberg, I. Determination of Diffusion Coefficients in Volume-Changing Systems—Application in the Case of Potato Drying. J. Food Eng. 1991, 14, 317–326. DOI: https://doi.org/10.1016/0260-8774(91)90021-J.
- Li, J.; Bennamoun, L.; Fraikin, L.; Salmon, T.; Toye, D.; Schreinemachers, R.; Leonard, A. Analysis of the Shrinkage Effect on Mass Transfer during Convective Drying of Sawdust/Sludge Mixtures. Drying Technol. 2014, 32, 1706–1717. DOI: https://doi.org/10.1080/07373937.2014.924136.