Model-based framework for the evaluation of energy-efficiency measures in multi-cylinder paper drying

References

• IEA. Pulp and Paper Final energy demand in pulp and paper in the Sustainable Development Scenario, 2000–2030. https://www.iea.org/reports/pulp-and-paper (accessed Feb 1, 2021).
   Google Scholar
• Laurijssen, J.; Gram, F. J. d.; Worrell, E.; Faaij, A. Optimizing the Energy Efficiency of Conventional Multi-Cylinder Dryers in the Paper Industry. Energy 2010, 35, 3738–3750. DOI: 10.1016/j.energy.2010.05.023.
   Web of Science ®Google Scholar
• Mujumdar, A., Ed. Handbook of Industrial Drying, 3rd ed.; CRC Press: Boca Raton, FL, 2006.
   Google Scholar
• European Commission. Merger Decision IV/M.478 of 29/07/1994: DG IV/B Merger Task Force, 1994.
   Google Scholar
• Chen, X.; Li, J.; Liu, H.; Yin, Y.; Zhang, Y. Energy System Diagnosis of Paper-Drying Process, Part 2: A Model-Based Estimation of Energy-Saving Potentials. Drying Technol. 2016, 34, 1219–1230. DOI: 10.1080/07373937.2015.1095206.
   Web of Science ®Google Scholar
• Ghodbanan, S.; Alizadeh, R.; Shafiei, S. Optimization for Energy Consumption in Drying Section of Fluting Paper Machine. Therm. Sci. 2017, 21, 1419–1429. DOI: 10.2298/TSCI150503141G.
   Web of Science ®Google Scholar
• Chen, X.; Man, Y.; Zheng, Q.; Hu, Y.; Li, J.; Hong, M. Industrial Verification of Energy Saving for the Single-Tier Cylinder Based Paper Drying Process. Energy 2019, 170, 261–272. DOI: 10.1016/j.energy.2018.12.152.
   Web of Science ®Google Scholar
• Li, Y.; Liu, H.; Li, J.; Tao, J. Process Parameters Optimization for Energy Saving in Paper Machine Dryer Section. Drying Technol. 2011, 29, 910–917. DOI: 10.1080/07373937.2010.548617.
   Web of Science ®Google Scholar
• Yin, Y.; Li, J.; Liu, H.; Chen, X. An Energy-Saving Assessment Approach for Hood Retrofitting in Multi-Cylinder Dryer Sections. Drying Technol. 2016, 34, 1868–1883. DOI: 10.1080/07373937.2016.1142452.
   Web of Science ®Google Scholar
• Schneeberger, M. Energetische Trocknungsoptimierung Bei Papiermaschinen Mittels Simulation Der Stoff-Und Wärmeübertragung Unter Berücksichtigung Der Trocknungsrelevanten Eigenschaften Der Faserstoffe. Ph.D. Dissertation, TU Graz, Austria, 2014.
   Google Scholar
• Kong, L.; Tao, Z.; Liu, H.; Zhang, D. Effect of Operating Parameters on the Drying Performance of Multicylinder Paper Machine Dryer Section. Drying Technol. 2016, 34, 1641–1650. DOI: 10.1080/07373937.2016.1139588.
   Web of Science ®Google Scholar
• Lindell, K.; Stenström, S. A Modular Process Modeling Tool for the Analysis of Energy Use and Cost in the Pulp and Paper Industry. Drying Technol. 2006, 24, 1335–1345. DOI: 10.1080/07373930600951109.
   Web of Science ®Google Scholar
• Kong, L.; Liu, H.; Li, J.; Tao, J. Waste Heat Integration of Coating Paper Machine Drying Process. Drying Technol. 2011, 29, 442–450. DOI: 10.1080/07373937.2010.506620.
   Web of Science ®Google Scholar
• Treppe, K.; Zelm, R.; Schinke, L.; Kuitunen, S.; Pinnau, S.; Kamischke, R.; Dixit, O.; Großmann, H., & Mollekopf, N. Energetische Optimierung der Trockenpartie Wärmetechnische Bewertung zur Steigerung der Energieeffizienz. Final Report for the Project n°117 funded by the Center of Research and Technology of the German Pulp and Paper Association, 2012.
   Google Scholar
• Sivill, L.; Ahtila, P. Energy Efficiency Improvement of Dryer Section Heat Recovery Systems in Paper Machines – A Case Study. Appl. Therm. Eng. 2009, 29, 3663–3668. DOI: 10.1016/j.applthermaleng.2009.06.022.
   Web of Science ®Google Scholar
• Wilhelmsson, B.; Stenström, S.; Nilsson, L.; Krook, R.; Persson, H.; Wimmerstedt, R. Modeling Multicylinder Paper Drying-Validation of a New Simulation Program. Tappi J. 1996, 79, 157–167.
   Web of Science ®Google Scholar
• Wilhelmsson, B.; Stenström, S. Heat and Mass Transfer Coefficients in Computer Simulation of Paper Drying. Drying Technol. 1995, 13, 959–975. DOI: 10.1080/07373939508916993.
   Web of Science ®Google Scholar
• Ghodbanan, S.; Alizadeh, R.; Shafiei, S. Steady-State Modeling of Multi-Cylinder Dryers in a Corrugating Paper Machine. Drying Technol. 2015, 33, 1474–1490. DOI: 10.1080/07373937.2015.1020161.
   Web of Science ®Google Scholar
• Gaillemard, C. Modelling the Moisture Content of Multi-Ply Paperboard in the Paper Machine Drying Section. Ph.D. Dissertation, KTH Royal Institute of Technology, Stockholm, Sweden, 2006.
   Google Scholar
• Slätteke, O. Modeling and Control of the Paper Machine Drying Section. Ph.D. Dissertation, Lund University, Sweden, 2006.
   Google Scholar
• Ahrens, F.; Rudman, I. 2003 The Impact of Dryer Surface Deposits and Temperature Graduation in the First Dryer Section on Drying Productivity. TAPPI Spring Technical Conference, Chicago, IL, May 8–10.
   Google Scholar
• Nilsson, L. Heat and Mass Transfer in Multicylinder Drying Part II Analysis of Internal and External Transport Resistances. Chem. Eng. Process 2004, 43, 1555–1560. DOI: 10.1016/j.cep.2004.03.002.
   Web of Science ®Google Scholar
• Heikkilä, P. A Study on the Drying Process of Pigment Coated Paper Webs. Ph.D. Dissertation, Helsinki University of Technology, Finland, 1993.
   Google Scholar
• Rhodius, D.; Göttsching, L. Der Trocknungsverlauf Von Papier Und Pappe in Abhängigkeit Von Trocknungstechnischen Und Papiertechnologischen Parametem. Teil IV: Trocknung in Der Mehrzylinder-Trockenpartie. Das Papier 1979, 33, 1–9.
   Google Scholar
• Krischner, O.; Kast, W. Die Wissenschaftlichen Grundlagen Der Trochnungstechnik, Dritte Auflage; Springer-Verlag: Hamburg, 1978.
   Google Scholar
• Nilsson, L. Heat and Mass Transfer in Multicylinder Drying Part I Analysis of Machine Data. Chem. Eng. Process 2004, 43, 1547–1553. DOI: 10.1016/j.cep.2004.03.003.
   Web of Science ®Google Scholar
• Rossié, K. Die Diffusion Von Wasserdampf in Luft Bei Temperaturen Bis 300 °C. Forsch. Ing-Wes. 1953, 19, 49–58. DOI: 10.1007/BF02558326.
   Google Scholar
• Kong, L.; Liu, H. A Static Energy Model of Conventional Paper Drying for Multicylinder Paper Machines. Drying Technol. 2012, 30, 276–296. DOI: 10.1080/07373937.2011.635253.
   Web of Science ®Google Scholar
• Chen, X.; Li, J.; Liu, H.; Yin, Y.; Hong, M.; Zeng, Z. Energy System Diagnosis of Paper-Drying Process, Part 1: Energy Performance Assessment. Drying Technol. 2016, 34, 930–943. DOI: 10.1080/07373937.2015.1087022.
   Web of Science ®Google Scholar
• Koretsky, M. D. Engineering and Chemical Thermodynamics; John Wiley & Sons: Hoboken, NJ, 2004.
   Google Scholar
• Karlsson, M.; Oyj, M. Papermaking Part 2, Drying; Paper Engineers’ Association: Helsinki, Finland, 2000.
   Google Scholar
• Valmet. New opportunities with OptiSizer Hard. https://www.valmet.com/board-and-paper/board-and-paper-machines/sizing/hard-nip-sizing/new-opportunities-with-hard-nip-sizing/ (accessed June 15, 2021).
   Google Scholar
• Stenström, S. Drying of Paper: A Review 2000–2018. Drying Technol. 2020, 38, 821–825. DOI: 10.1080/07373937.2019.1596949.
   Web of Science ®Google Scholar
• Voith. Steel cylinders are the future of drying: EvoDry (Product sheet), 2019.
   Google Scholar
• Arpagaus, C.; Bless, F.; Uhlmann, M.; Schiffmann, J.; Bertsch, S. S. High Temperature Heat Pumps: Market Overview, State of the Art, Research Status, Refrigerants, and Application Potentials. Energy 2018, 152, 985–1010. DOI: 10.1016/j.energy.2018.03.166.
   Web of Science ®Google Scholar
• Appel, D. W.; Hong, S. H. Optimizing Heat Transfer Using Bars in Dryers. Paper Technology and Industry 1975, 16, 264–269.
   Google Scholar
• Kadant Johnson Inc. Heat transfer performance with dryer bars. Technical White Paper series, 2005.
   Google Scholar