References
- Poós, T.; Szabó, V. Modeling of Heat and Mass Transfer in Fluidized Bed Dryers Using the Volumetric Heat Transfer Coefficient. Part 1: Equations Describing the Simultaneous Heat and Mass Transfer. Drying Technol. 2021, 39, 1–10. DOI: https://doi.org/10.1080/07373937.2021.1938112.
- Mitsiri, A.; Prachayawarakorn, S.; Devahastin, S.; Rordprapat, W.; Soponronnarit, S. Alternative Economic and Shortened Method for the Production of Dried Germinated Rice. Drying Technol. 2021, 1–15. DOI: https://doi.org/10.1080/07373937.2021.1945619.
- Singh, P.; Mahanta, P.; Kalita, P. Experimental Investigation of Paddy Drying Characteristics in a Slitless Rotary Fluidized-Bed Dryer. Drying Technol. 2021, 39, 1–11. DOI: https://doi.org/10.1080/07373937.2021.2018700.
- Amantéa, R. P.; Fortes, M.; Ferreira, W. R.; Santos, G. T. Energy and Exergy Efficiencies as Design Criteria for Grain Dryers. Drying Technol. 2018, 36, 491–507. DOI: https://doi.org/10.1080/07373937.2017.1409232.
- Yahya, M.; Fudholi, A.; Sopian, K. Energy and Exergy Analyses of Solar-Assisted Fluidized Bed Drying Integrated with Biomass Furnace. Renewable Energy 2017, 105, 22–29. DOI: https://doi.org/10.1016/j.renene.2016.12.049.
- Regulagadda, P.; Dincer, I.; Naterer, G. F. Exergy Analysis of a Thermal Power Plant with Measured Boiler and Turbine Losses. Appl. Therm. Eng. 2010, 30, 970–976. DOI: https://doi.org/10.1016/j.applthermaleng.2010.01.008.
- Aziz, M.; Kansha, Y.; Tsutsumi, A. Self-Heat Recuperative Fluidized Bed Drying of Brown Coal. Chem. Eng. Process 2011, 50, 944–951. DOI: https://doi.org/10.1016/j.cep.2011.07.005.
- Romdhana, H.; Bonazzi, C.; Esteban-Decloux, M. Computer-Aided Process Engineering for Environmental Efficiency: Industrial Drying of Biomass. Drying Technol. 2016, 34, 1253–1269. DOI: https://doi.org/10.1080/07373937.2015.1104348.
- Acar, C.; Dincer, I.; Mujumdar, A. A Comprehensive Review of Recent Advances in Renewable-Based Drying Technologies for a Sustainable Future. Drying Technol. 2022, 40, 1029–1050. DOI: https://doi.org/10.1080/07373937.2020.1848858.
- Fushimi, C.; Kansha, Y.; Aziz, M.; Mochidzuki, K.; Kaneko, S.; Tsutsumi, A.; Matsumoto, K.; Yokohama, K.; Kosaka, K.; Kawamoto, N.; et al. Novel Drying Process Based on Self-Heat Recuperation Technology. Drying Technol. 2010, 29, 105–110. DOI: https://doi.org/10.1080/07373937.2010.482719.
- Kansha, Y.; Tsuru, N.; Fushimi, C.; Shimogawara, K.; Tsutsumi, A. An Innovative Modularity of Heat Circulation for Fractional Distillation. Chem. Eng. Sci. 2010, 65, 330–334. DOI: https://doi.org/10.1016/j.ces.2009.05.001.
- Aziz, M.; Oda, T.; Kashiwagi, T. Enhanced High Energy Efficient Steam Drying of Algae. Appl. Energy 2013, 109, 163–170. DOI: https://doi.org/10.1016/j.apenergy.2013.04.004.
- Afshari, F.; Karagoz, S.; Comakli, O.; Zavaragh, H. G. Thermodynamic Analysis of a System Converted from Heat Pump to Refrigeration Device. Heat Mass Transfer 2019, 55, 281–291. DOI: https://doi.org/10.1007/s00231-018-2412-5.
- Sarker, M. S. H.; Ibrahim, M. N.; Abdul Aziz, N.; Punan, M. S. Energy and Exergy Analysis of Industrial Fluidized Bed Drying of Paddy. Energy 2015, 84, 131–138. DOI: https://doi.org/10.1016/j.energy.2015.02.064.
- Artyukhova, N.; Krmela, J. Improvement of the Convective Drying Efficiency in Devices with Weighted Layer: Multistage Drying in the Shelf Devices. In Proceedings of 9-th International Youth Science Forum “Litteris et Artibus. Lviv, Ukraine: Lviv Polytechnic National University, 173–180, Nov 21–23, 2019. https://openreviewhub.org/lea/paper-2019/improvement-convective-drying-efficiency-devices-weighted-layer-multistage-drying.
- Altay, K.; Hayaloglu, A. A.; Dirim, S. N. Determination of the Drying Kinetics and Energy Efficiency of Purple Basil (Ocimum Basilicum L.) Leaves Using Different Drying Methods. Heat Mass Transfer 2019, 55, 2173–2184. DOI: https://doi.org/10.1007/s00231-019-02570-9.
- Lamidi, R. O.; Jiang, L.; Pathare, P. B.; Wang, Y. D.; Roskilly, A. P. Recent Advances in Sustainable Drying of Agricultural Produce: A Review. Appl. Energy 2019, 233-234, 367–385. DOI: https://doi.org/10.1016/j.apenergy.2018.10.044.
- Devani, Y.; Yelamarthi, P. S. Energetic and Exergetic Analyses of Barnyard Millet Drying Using Continuous Multistage Fluidized Bed Dryer. J. Food Process Eng. 2019, 42, e13247. DOI: https://doi.org/10.1111/jfpe.13247.
- Аrtyukhov, A.; Аrtyukhova, N. Utilization of Dust and Ammonia from Exhaust Gases: New Solutions for Dryers with Different Types of Fluidized Bed. J. Environ. Health Sci. Eng. 2018, 16, 193–204. DOI: https://doi.org/10.1007/s40201-018-0307-5.
- Sadaka, S. S.; Luthra, K.; Atungulu, G. G. Evaluation of the Performance of a Custom-Made Fluidized Bed Drying System. Appl. Eng. Agric. 2018, 34, 1027–1037. DOI: https://doi.org/10.13031/aea.12909.
- Artyukhov, A. E.; Sklabinskiy, V. I. Investigation of the Temperature Field of Coolant in the Installations for Obtaining 3d Nanostructured Porous Surface Layer on the Granules of Ammonium Nitrate. J. Nano- Electron. Phys. 2017, 9, 01015–1–01015-4. DOI: https://doi.org/10.21272/jnep.9(1).01015.
- Artyukhova, N.; Krmela, J. Nanoporous Structure of the Ammonium Nitrate Granules at the Final Drying: The Effect of the Dryer Operation Mode. J. Nano- Electron. Phys. 2019, 11, 04006–1–04006-4. DOI: https://doi.org/10.21272/jnep.11(4).04006.
- Artyukhov, A.; Artyukhova, N.; Ivaniia, A.; Gabrusenoks, J. 2017 Multilayer Modified NH4NO3 Granules with 3D Nanoporous Structure: Effect of the Heat Treatment Regime on the Structure of Macro- and Mezopores. In Proceedings of the IEEE International Young Scientists Forum on Applied Physics and Engineering (YSF-2017), 315–318. DOI: https://doi.org/10.1109/YSF.2017.8126641.
- Artyukhova, N. Morphological Features of the Nanoporous Structure in the Ammonium Nitrate Granules at the Final Drying Stage in Multistage Devices. J. Nano- Electron. Phys. 2020, 12, 04036–1–04036-6. DOI: https://doi.org/10.21272/jnep.12(4).04036.
- Obodiak, V.; Artyukhova, N.; Artyukhov, A. Calculation of the Residence Time of Dispersed Phase in Sectioned Devices: Theoretical Basics and Software Implementation. In Advances in Design, Simulation and Manufacturing II. DSMIE 2019. Lecture Notes in Mechanical Engineering; Ivanov V, Ed.; Springer: Cham, 2020; pp 813–820. DOI: https://doi.org/10.1007/978-3-030-22365-6_81.
- Rahman, K. M.; Edwards, D. J.; Melville, L.; El-Gohary, H. Implementation of Bioenergy Systems towards Achieving United Nations’ Sustainable Development Goals in Rural Bangladesh. Sustainability 2019, 11, 3814. DOI: https://doi.org/10.3390/su11143814.
- Dada, O.; Mbohwa, C. Energy from Waste: A Possible Way of Meeting Goal 7 of the Sustainable Development Goals. Mater. Today: Proc. 2018, 5, 10577–10584. DOI: https://doi.org/10.1016/j.matpr.2017.12.390.
- Pawlita-Posmyk, M.; Wzorek, M. Biogas Production from the Perspective of Sustainable Development. Econ. Environ. Stud. 2020, 18, 1043–1057. DOI: https://doi.org/10.25167/ees.2018.47.1.
- Prasad, S.; Keitsch, M.; Shakya, S.; Fulford, D. Waste to Energy in Kathmandu Nepal – A Way toward Achieving Sustainable Development Goals. Sustainable Dev. 2021, 29, 906–914. DOI: https://doi.org/10.1002/sd.2183.