Preparation and drying characteristics of poplar wood modified by hexacyclite

References

• Goldhahn, C.; Cabane, E.; Chanana, M. Sustainability in Wood Materials Science: An Opinion about Current Material Development Techniques and the End of Lifetime Perspectives. Philos. Trans. A Math. Phys. Eng. Sci. 2021, 379, 20200339. DOI: 10.1098/rsta.2020.0339.
   PubMed Web of Science ®Google Scholar
• Xiao, S. L.; Chen, C. J.; Xia, Q. Q.; Liu, Y.; Yao, Y.; Chen, Q. Y.; Hartsfield, M.; Brozena, A.; Tu, K. K.; Eichhorn, S. J.; et al. Lightweight, Strong, Moldable Wood via Cell Wall Engineering as a Sustainable Structural Material. Science 2021, 374, 465–471. DOI: 10.1126/science.abg9556.
   PubMed Web of Science ®Google Scholar
• Lozhechnikova, A.; Vahtikari, K.; Hughes, M.; Österberg, M. Toward Energy Efficiency through an Optimized Use of Wood: The Development of Natural Hydrophobic Coatings That Retain Moisture-Buffering Ability. Energy Build. 2015, 105, 37–42. DOI: 10.1016/j.enbuild.2015.07.052.
   Web of Science ®Google Scholar
• F.; Jiang, T.; Li, Y. J.; Li, Y.; Zhang, A.; Gong, J. Q.; Dai, E.; Hitz, W.; Luo; L. B. Hu. Wood-Based Nanotechnologies toward Sustainability. Adv. Mater. 2018, 30, 39. DOI: 10.1002/adma.201703453.
   Web of Science ®Google Scholar
• Zhu, H. L.; Luo, W.; Ciesielski, P. N.; Fang, Z. Q.; Zhu, J. Y.; Henriksson, G.; Himmel, M. E.; Hu, L. B. Wood-Derived Materials for Green Electronics, Biological Devices, and Energy Applications. Chem. Rev. 2016, 116, 9305–9374. DOI: 10.1021/acs.chemrev.6b00225.
   PubMed Web of Science ®Google Scholar
• Wang, H. W.; Yao, Q. F.; Wang, C.; Fan, B. T.; Xiong, Y.; Chen, Y. P.; Sun, Q. F.; Jin, C. D.; Ma, Z. Q. New Insight on Promoted Thermostability of Poplar Wood Modified by MnFe2O4 Nanoparticles through the Pyrolysis Behaviors and Kinetic Study. Sci. Rep. 2017, 7, 1418. DOI: 10.1038/s41598-017-01597-4.
   PubMed Web of Science ®Google Scholar
• Kong, L. Z.; Guan, H.; Wang, X. Q. In Situ Polymerization of Furfuryl Alcohol with Ammonium Dihydrogen Phosphate in Poplar Wood for Improved Dimensional Stability and Flame Retardancy. ACS Sustainable Chem. Eng. 2018, 6, 3349–3357. DOI: 10.1021/acssuschemeng.7b03518.
   Web of Science ®Google Scholar
• Schneider, M.; Witt, A. E. History of Wood Polymer Composite Commercialization. For. Prod. J 2004, 54, 19–24.
   Web of Science ®Google Scholar
• He, B. J.; Zhu, J. Constructing Community Gardens? Residents’ Attitude and Behaviour towards Edible Landscapes in Emerging Urban Communities of China. Urban Urban Green 2018, 34, 154–165. DOI: 10.1016/j.ufug.2018.06.015.
   Web of Science ®Google Scholar
• Pecenka, R.; Lenz, H.; Idler, C. Influence of the Chip Format on the Development of Mass Loss, Moisture Content and Chemical Composition of Poplar Chips during Storage and Drying in Open-Air Piles. Biomass Bioenerg. 2018, 116, 140–150. DOI: 10.1016/j.biombioe.2018.06.005.
   Web of Science ®Google Scholar
• Korkut, S.; Budakçı, M. Effect of High-Temperature Treatment on the Mechanical Properties of Rowan (Sorbus aucuparia L.) Wood. Drying Technol. 2009, 27, 1240–1247. DOI: 10.1080/07373930903267161.
   Web of Science ®Google Scholar
• Leslaw, K. Reinforcing Wood by Surface Modification. Compos. Struct. 2016, 158, 64–71. DOI: 10.1016/j.compstruct.2016.06.055.
   Web of Science ®Google Scholar
• He, Z. B.; Qian; L, J.; Qu, J.; Yan, N.; Yi, S. L. Effects of Tung Oil Treatment on Wood Hygroscopicity, Dimensional Stability and Thermostability. Ind. Crop. Prod. 2019, 140, 111647. DOI: 10.1016/j.indcrop.2019.111647.
   Web of Science ®Google Scholar
• Zhang; W, L. L.; Zhang, L.; Peng, Y.; Wang, W.; Cao, J. Z. Thermal Behavior and Flame Retardancy of Poplar Wood Impregnated with Furfuryl Alcohol Catalyzed by Boron/Phosphorus Compound System. Ind. Crop. Prod. 2022, 176, 114361. DOI: 10.1016/j.indcrop.2021.114361.
   Web of Science ®Google Scholar
• Liu; W, S. Q.; Wan; X, C.; Zhang; A. De Crema, T.; Seeger, S. All-Organic Fluorine-Free Superhydrophobic Bulk Material with Mechanochemical Robustness and Photocatalytic Functionality. Chem. Eng. J. 2020, 385, 9. DOI: 10.1016/j.cej.2019.123969.
   Web of Science ®Google Scholar
• Huang, W.; Li, H. Q.; Zheng, L. Z.; Lai, X. J.; Guan, H.; Wei, Y.; Feng, H. Y.; Zeng, X. R. Superhydrophobic and High-Performance Wood-Based Piezoresistive Pressure Sensors for Detecting Human Motions. Chem. Eng. J. 2021, 426, 130837. DOI: 10.1016/j.cej.2021.130837.
   Web of Science ®Google Scholar
• Ortiz-Grisales, P.; Patiño-Murillo, J.; Duque-Grisales, E. Comparative Study of Computational Models for Reducing Air Pollution through the Generation of Negative Ions. Sustainability 2021, 13, 7197. DOI: 10.3390/su13137197.
   Web of Science ®Google Scholar
• Sun, X. H.; Yu, Q. Q.; Yang, Z. L.; Hu, S. W.; Yang, H. Y.; Wang, X.; Zhou, J. Z.; Yu, Y.; Wang, C. Y.; Wooden, Y. D. L. "Air Purifiers" with Fire-Retardancy and Smoke-Suppression Properties. Adv. Sustain. Syst. 2022, 6, 11. DOI: 10.1002/adsu.202200346.
   Web of Science ®Google Scholar
• Ananias, R. A.; Ulloa, J.; Elustondo, D. M.; Salinas, C.; Rebolledo, P.; Fuentes, C. Energy Consumption in Industrial Drying of Radiata Pine. Drying Technol. 2012, 30, 774–779. DOI: 10.1080/07373930903267161.
   Web of Science ®Google Scholar
• Haque, M. N. Analysis of Heat and Mass Transfer during High-Temperature Drying of Pinus Radiata. Drying Technol. 2007, 25, 379–389. DOI: 10.1080/07373930601184551.
   Web of Science ®Google Scholar
• Pang, S. S. Emissions from Kiln Drying of Pinus Radiata Timber: Analysis, Recovery, and Treatment. Drying Technol. 2012, 30, 1099–1104. DOI: 10.1080/07373937.2012.685673.
   Web of Science ®Google Scholar
• Cai, M. Z.; Fu, Z. Y.; Cai, Y. C.; Zhang, Y.; Cai, J.; Xu, C. Effect of Impregnation with Maltodextrin and 1,3-Dimethylol-4,5-Dihydroxyethyleneurea on the Conventional Drying Characteristics of Poplar Wood. Appl. Sci.-Basel 2019, 9, 473. DOI: 10.3390/app9030473.
   Web of Science ®Google Scholar
• Kekkonen, P. M.; Ylisassi, A.; Telkki, V. V. Absorption of Water in Thermally Modified Pine Wood as Studied by Nuclear Magnetic Resonance. J. Phys. Chem. C 2014, 118, 2146–2153. DOI: 10.1021/jp411199r.
   Web of Science ®Google Scholar
• Xu, K.; Yuan, S. F.; Gao, Y. L.; Wu, Y. Q.; Zhang, J.; Li, X. J.; Lu, J. X. Characterization of Moisture States and Transport in MUF Resin-Impregnated Poplar Wood Using Low Field Nuclear Magnetic Resonance. Drying Technol. 2021, 39, 791–802. DOI: 10.1080/07373937.2020.1719503.
   Web of Science ®Google Scholar
• Xu, K.; Gao, Y. L.; Zhang, X. M.; Li, Z. H.; Song, S. S.; Wu, Y. Q.; Li, X. J.; Lu, J. X. Effects of Drying Temperature on Hygroscopicity and Mechanical Performance of Resin-Impregnated Wood. Drying Technol. 2022, 40, 2414–2426. DOI: 10.1080/07373937.2021.1949341.
   Web of Science ®Google Scholar
• Zhou, Y.; Jiang, X.; Liu, J. 2007 Study on Drying Characteristics of Impregnated Plantation Poplar Lumber. In Proceedings of the 5th Asia-Pacific Drying Conference, Hong Kong, China, 889–895. DOI: 10.1142/9789812771957_0130.
   Google Scholar
• Chen, L.; Li, J.; Lu, M.; Guo, X.; Zhang, H.; Han, L. Integrated Chemical and Multiscale Structural Analyses for the Processes of Acid Pretreatment and Enzymatic Hydrolysis of Corn Stover. Carbohydr. Polym. 2016, 141, 1–9. DOI: 10.1016/j.carbpol.2015.12.079.
   PubMed Web of Science ®Google Scholar
• Labb, N.; Rials, T. G.; Kelley, S. S.; Cheng, Z.-M.; Kim, J.-Y.; Li, Y. FT-IR Imaging and Pyrolysis-Molecular Beam Mass Spectrometry: New Tools to Investigate Wood Tissues. Wood Sci. Technol. 2005, 39, 61–76. DOI: 10.1007/s00226-004-0274-0.
   Web of Science ®Google Scholar
• Jiang, S. Y.; Ma, A.; Ramachandran, S. Negative Air Ions and Their Effects on Human Health and Air Quality Improvement. Int. J. Mol. Sci. 2018, 19, 19. DOI: 10.3390/ijms19102966.
   Web of Science ®Google Scholar
• Eriksson, J.; Johansson, H.; Danvind, J. A. Mass Transport Model for Drying Wood under Isothermal Conditions. Dry. Technol. 2007, 25, 433–439. DOI: 10.1080/07373930601183785.
   Web of Science ®Google Scholar
• Liu, H. H.; Ke, M. Q.; Zhou, T.; Sun, X. L. Effect of Samples Length on the Characteristics of Moisture Transfer and Shrinkage of Eucalyptus urophylla Wood during Conventional Drying. Forests 2023, 14, 1218. DOI: 10.3390/f14061218.
   Web of Science ®Google Scholar
• Hoadley, R. B. Understanding Wood: A Craftsman’s Guide to Wood Technology, Taunton Press, 2000.
   Google Scholar
• Brownstein, K. R.; Tarr, C. E. Importance of Classical Diffusion in NMR Studies of Water in Biological Cells. Phys. Rev. A 1979, 19, 2446–2453. DOI: 10.1103/PhysRevA.19.2446.
   Web of Science ®Google Scholar
• Riggin, M. T.; Sharp, A. R.; Kaiser, R.; Schneider, M. H. Transverse NMR Relaxation of Water in Wood. J. Appl. Polym. Sci. 1979, 23, 3147–3154. DOI: 10.1002/app.1979.070231101.
   Web of Science ®Google Scholar
• Gao, Y. L.; Zhao, L. Y.; Jiang, J. H.; Li, Z.; Lyu, J. X. Water Absorption Properties in Transverse Direction of Heat-Treated Chinese Fir Wood Determined Using TD-NMR. Forests 2021, 12, 1545. DOI: 10.3390/f12111545.
   Web of Science ®Google Scholar
• Beck, G.; Thybring, E. E.; Thygesen, L. G.; Hill, C. Characterization of Moisture in Acetylated and Propionylated Radiata Pine Using Low-Field Nuclear Magnetic Resonance (LFNMR) Relaxometry. Holzforschung 2018, 72, 225–233. DOI: 10.1515/hf-2017-0072.
   Web of Science ®Google Scholar
• Elustondo, D.; Matan, N.; Langrish, T.; Pang, S. S. Advances in Wood Drying Research and Development. Drying Technol. 2023, 41, 890–914. DOI: 10.1080/07373937.2023.2205530.
   Web of Science ®Google Scholar