A Control-Volume procedure compared with the Finite-Element method for calculating Stress and Strain during Wood Drying

REFERENCES

• A. Martensson “ Mechanical behaviour of wood exposed to humidity variations ’ Doctoral dissertatio , Lund Institute of Technology ( 1992 ).
   Google Scholar
• Y.D. Fryer , C. Bailey , M. Cross and C-H Lai “ A control volume procedure for solving the elastic stress-strain equation on an unstructured mesh ” Applied Mathematical Modelling , vol. 15 , pp. 639 – 645 ( 1991 ).
   Google Scholar
• S. Felix “ Modélisation des déformations et contraintes dans unc pièce de bois en cours de séchage ” Thèse de I&Université de Bordeaux I ( 1990 )
   Google Scholar
• T. Moren “ Creep, deformation and moisture redistribution during air connective wood drying and conditioning ” Doctoral Thesis . Lulea University of Technology . Swedeb ( 1993 ).
   Google Scholar
• N. Ottosen and H. Petenson “ Introduction to finite element method ” Prentice Hall , London ( 1992 ).
   Google Scholar
• J. Passard , R. Kouitat and P. Perré “ Study of the flow in a cone-plate geometry for different behaviour laws “ Eurotherm n°20, TIFAN report tome IV, p . 27 – 52 . Lille ( 1991 ).
   Google Scholar
• S.V. Patankar “ Numerical heat transfer and fluid flow ” Hemisphere Publishing Corporation. McGraw Hill . ( 1980 ).
   Google Scholar
• P. Perré “ Transferts couplés en milieux poreux non-saturé. Possibilités et limitations de la formulation macroscopique” Habilitation à Diriger des Recherches , INPL , Nancy ( 1992 ).
   Google Scholar
• P. Perré and M. Martin “ Drying at high temperature of sapwood and heartwood : theory, experiment and practical consequence on kiln control ” to be published in Drying Technology .
   Google Scholar
• P. Perré M. Moser and M. Martin “ Advances in transport phenomena during convective drying with superheated steam or moist air ” Int. J. Heat Mass Transfer , Vo1.36 ( 11 ), p. 2725 – 2756 ( 1993 ).
   Google Scholar
• A. Ranta-Maunus “ The viscoelasticity of wood at varying moisture content ” Wood Science Technology . Vo1.9 , p. 189 – 205 ( 1975 ).
   Google Scholar
• A. Salin “ Numerical prediction of checking during timber drying and a new machano-sorptive creep model ” Holz als Roh- und Werkstoff . Vo1.50 , p. 195 – 200 ( 1992 ).
   Google Scholar
• S.P. Timoshenko “ Résistance des matériaux ” Tome I , Dunod, Paris ( 1968 ).
   Google Scholar
• I.W. Turner and P. Perré A comparison of the drying simulation codes TRANSPORE and WOOD2D which are used for the modelling of two-dimensional wood drying processes ” in this issue of Drying Technology Journal .
   Google Scholar
• O.C. Zienkiewicz and R.L. Taylor “ The finite element method” , 4th edition Volumes 1 and 2 , McGraw Hill , London ( 1989 ).
   Google Scholar